links_count=2; // [1..20]
include_terminal=true; // [true,false]
include_screwhole=true; // [true,false]
clip_screwhole=2;

include <export.scad>
//export=MODEL_LINKS;
//export=MODEL_CLIP_A;
//export=MODEL_CLIP_B;
//export=MODEL_CLIP_RATCHETING_A;
//export=MODEL_CLIP_RATCHETING_B;

use <BOSL/transforms.scad>
use <BOSL/shapes.scad>
include <BOSL/constants.scad>

use <specs_strap.scad>
use <specs_platform.scad>

use <common.scad>
use <strap_common.scad>
use <platform_common.scad>

if (is_model_strict(MODEL_LINKS)) {
    echo("===============================");
    echo(str("Strap length: ", (links_count * get_link_segment_size().x), " mm"));
    echo("===============================");
}

assert(get_link_segment_size().x >= 10, "Link segment is too short.");
assert(get_link_segment_size().z >= (get_link_pin_diameter() + get_link_socket_slack().z + 1), "Link segment is too thin.");

module link(terminal=false) {
    $fn=$preview?4:20;
    module link_joiner() {
        gap=get_link_socket_roundgap();
        segment_size=get_link_segment_size();
        arm_size=get_link_joiner_arm_size();
        
        module pin_to_socket_joiner() {
            joiner_size=[segment_size.x-get_link_socket_size().x+get_link_socket_size().x*0.2,
                segment_size.y-4,
                segment_size.z];
            difference() {
                right(joiner_size.x/2 + 4.5) cuboid(joiner_size, fillet=1, edges=EDGES_Z_ALL + EDGES_BOTTOM);
                right(segment_size.x) scale([1, 2, 1]) pin_socket_area();
            }
        }
        
        pin_to_socket_joiner();
    }
    
    link_connector_pin();
    if (terminal) {
        right(get_link_segment_size().x + 2) zrot(180) link_connector_pin();
    } else {
        link_joiner();
        right(get_link_segment_size().x) link_connector_socket();
    }
}

module link_chain(links_count, include_terminal=true) {
    for (i = [0:links_count-1]) {
        terminal=(i==links_count-1) && include_terminal;
        right(i*get_link_segment_size().x) link(terminal=terminal);
    }
}

module clip() {
    $fn=$preview?4:20;
    socket_size=get_link_socket_size();
    clip_size=get_link_clip_size();
    pin_diam=get_link_pin_diameter();
    slot_slack=get_link_socket_slack();
    size=[clip_size.x+socket_size.x, clip_size.y, clip_size.z];
    slot_size=[clip_size.x+slot_slack.x, size.y+1, pin_diam+slot_slack.z];
    entry_size=[slot_size.x, clip_size.y+1, clip_size.z];
    entry_pos=[0, 0, 1.5];
    
    module socket_area() {
        $fn=$preview? 10 : 20;
        xrot(90) down(size.y/2) cylinder(d=size.z, h=size.y);
    }
    module socket_cutout() {
        $fn=$preview? 10 : 20;
        xrot(90) down(slot_size.y/2) cylinder(d=slot_size.z, h=slot_size.y);
    }
    module cover() {
        translate(entry_pos) cube(entry_size, center=true);
    }
    module joiner(groove) {
        slack=groove?0.2:0;
        joiner_size=[entry_size.x-6+slack, entry_size.y-6+slack, entry_size.z-3+slack];
        joiner_pos=[entry_pos.x, entry_pos.y, entry_pos.z - entry_size.z/2 + joiner_size.z/2];
        difference() {
            translate(joiner_pos) cube(joiner_size, center=true);
            screw_cutout();
        }
    }
    module screw_cutout() {
        if (include_screwhole) down(clip_size.z/2) screwhole(d=clip_screwhole, h=clip_size.z);
    }
    
    module model() {
        difference() {
            union() {
                right(clip_size.x/2) socket_area();
                left(clip_size.x/2) socket_area();
                cube(clip_size, center=true);
            }
            right(clip_size.x/2) socket_cutout();
            left(clip_size.x/2) socket_cutout();
            screw_cutout();
        }
    }
    
    left(socket_size.x/2)
    {
        if (is_model(MODEL_CLIP_A)) {
            difference() {
                model();
                cover();
            }
            joiner(groove=false);
        }
        if (is_model(MODEL_CLIP_B)) {
            difference() {
                intersection() {
                    model();
                    cover();
                }
                joiner(groove=true);
            }
        }
    }
}

module clip_ratcheting(ratchet_length=28) {
    $fn=$preview?4:20;
    socket_size=get_link_socket_size();
    clip_size=get_link_clip_size();
    pin_diam=get_link_pin_diameter();
    slot_slack=get_link_socket_slack();
    size=[clip_size.x+socket_size.x, clip_size.y, clip_size.z];
    slot_size=[clip_size.x+slot_slack.x + 0.2, size.y+1, pin_diam+slot_slack.z];
    entry_size=[slot_size.x-5, clip_size.y+1, clip_size.z];
    connector_size=[25, 0, 0];
    module hookRight() {
        right(connector_size.x/2) zrot(180) link_connector_pin();
    }
    module hookLeft() {
        left(connector_size.x/2) link_connector_pin();
    }
    wall=2;
    tooth_size=[4, 3, 3];
    module tooth() {
        s=[tooth_size.x, tooth_size.z, tooth_size.y];
        up(tooth_size.z/2) xrot(-90) right_triangle(s);
    }
    module teethFwd() {
        tooth_count = ratchet_length/tooth_size.x;
        fwd((clip_size.y-wall*2)/2)
        right(ratchet_length/2) {
            for (i=[1:tooth_count]) {
                left(i*tooth_size.x) tooth();
            }
            cap_size=[ratchet_length, tooth_size.y, 1];
            up(tooth_size.z/2 + cap_size.z/2) left(cap_size.x/2) back(tooth_size.y/2) {
                difference() {
                    cube(cap_size, center=true);
                    translate([0.1, 0.1, 0]) back(tooth_size.y/2) right(ratchet_length/2) zrot(180) tooth();
                }
            }
        }
    }
    module teethBack() {
        scale([1, -1, 1]) teethFwd();
    }
    module ratchetLeft() {
        right(ratchet_length/2) {
            difference() {
                cube([ratchet_length, clip_size.y, clip_size.z], center=true);
                up(wall/2) cube([ratchet_length, clip_size.y-wall*2, clip_size.z], center=true);
                right(ratchet_length/2+1) {
                    slideRailGuide(groove=true);
                    scale([1,-1,1]) slideRailGuide(groove=true);
                }
            }
            teethFwd();
            teethBack();
        }
    }
    ratchet_tooth_count=2;
    ratchet_wall=2.5;
    ratchet_slack=0.3;
    rail_slack=0.2;
    ratchet_tooth_scale_z=0.8;
    module ratchetTeethFront() {
        module ratchetButton() {
            size=[8,wall*4,4];
            up(size.z+1) fwd(wall*2 - ratchet_wall) cuboid(size, fillet=1, edges=EDGES_FRONT);
            up(2) back(ratchet_wall/2) cube([size.x, ratchet_wall, tooth_size.z*ratchet_tooth_scale_z + size.z], center=true);
        }
        fwd((clip_size.y-wall*2)/2 - tooth_size.y - ratchet_slack)
        left(ratchet_length) {
            for (i=[0:ratchet_tooth_count-1]) {
               right(i*tooth_size.x) scale([-1,-1*(1-i/5),ratchet_tooth_scale_z]) tooth();
            }
            ratchetButton();
        }
        
        module ratchetWall() {
            up(tooth_size.z/2) left(ratchet_length/2 + wall - wall/2) fwd(clip_size.y/2-wall-tooth_size.y-ratchet_wall/2 - ratchet_slack)
            down(wall/2+0.5) cube([ratchet_length + wall, ratchet_wall, tooth_size.z*ratchet_tooth_scale_z], center=true);
        }
        ratchetWall();
    }
    module ratchetTeethBack() {
        scale([1,-1,1]) ratchetTeethFront();
    }
    module ratchetRight() {
        left(wall) cube([wall*2, clip_size.y + rail_slack*2, clip_size.z], center=true);
        
        ratchetTeethFront();
        ratchetTeethBack();
    }
    module slideRailGuide(groove) {
        size=[ratchet_length, wall, wall];
        fwd(clip_size.y/2 + rail_slack)
        left(size.x/2) scale(groove?1.5:1) cuboid(size, fillet=0.5);
    }
    module slideRailLeft() {
        size=[ratchet_length, clip_size.y/2 - ratchet_wall*2 - wall/2 - ratchet_slack - tooth_size.y, clip_size.z];
        right(size.x/2) cube(size, center=true);
    }
    module slideRailRight() {
        size=[ratchet_length + 3, wall*1.5, clip_size.z];
        module railFront() {
            fwd(clip_size.y/2 + size.y/2 + rail_slack) left(size.x/2)
            cuboid(size, fillet=1, edges=EDGES_FRONT);
            slideRailGuide(groove=false);
        }
        module railBack() {
            scale([1, -1, 1]) railFront();
        }
        railFront();
        railBack();
    }
    
    right(size.x + connector_size.x - 2) {
        left(2)
        if (is_model(MODEL_CLIP_RATCHETING_A) || is_model(MODEL_CLIP_RATCHETING)) {
            left(ratchet_length + wall + 1) {
                hookLeft();
                left(0.1) {
                    ratchetLeft();
                    slideRailLeft();
                }
            }
        }
        right(is_model(MODEL_DEMO) ? ratchet_length + 5 : 0)
        if (is_model(MODEL_CLIP_RATCHETING_B) || is_model(MODEL_CLIP_RATCHETING)) {
            ratchetRight();
            hookRight();
            slideRailRight();
        }
    }
}

// === Export ===
if (is_model(MODEL_DEMO)) {
    foreach_platform_strap_connector() {
        zrot(180) down(get_link_segment_size().z/2) {
            link_chain(links_count, include_terminal=include_terminal);
            /*right(links_count * get_link_segment_size().x + get_link_clip_size().x) {
                clip();
                right(get_link_clip_size().x) clip_ratcheting();
            }*/
        }
    }
} else {
    if (is_model(MODEL_CLIP_A) || is_model(MODEL_CLIP_B)) {
        left(get_link_clip_size().x) clip();
    }
    if (is_model(MODEL_CLIP_RATCHETING) || is_model(MODEL_CLIP_RATCHETING_A) || is_model(MODEL_CLIP_RATCHETING_B)) {
        left(get_link_clip_size().x * 2 + 3) clip_ratcheting();
    }
    if (is_model(MODEL_LINKS)) for (i = [0:links_count-1]) {
        terminal=(i==links_count-1) && include_terminal;
        right(i*get_link_segment_size().x) link(terminal=terminal);
    }
}