diff --git a/examples/Touchpad/Touchpad.ino b/examples/Touchpad/Touchpad.ino new file mode 100644 index 0000000..1dc0fbf --- /dev/null +++ b/examples/Touchpad/Touchpad.ino @@ -0,0 +1,62 @@ +/** + * @file Touchpad.ino + * @author Lewis He (lewishe@outlook.com) + * @license MIT + * @copyright Copyright (c) 2023 Shenzhen Xin Yuan Electronic Technology Co., Ltd + * @date 2023-04-12 + * + */ + +#include + +#define TOUCH_MODULES_GT911 +#include "TouchLib.h" +#include "utilities.h" + +TouchLib touch(Wire, BOARD_I2C_SDA, BOARD_I2C_SCL, GT911_SLAVE_ADDRESS1); + + +void setup() +{ + Serial.begin(115200); + pinMode(BOARD_TOUCH_INT, INPUT); + + //! The board peripheral power control pin needs to be set to HIGH when using the peripheral + pinMode(BOARD_POWERON, OUTPUT); + digitalWrite(BOARD_POWERON, HIGH); + + Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL); + + touch.init(); + +} + +void loop() +{ + // You can judge the level of the touch interrupt to get whether there is a touch + if (digitalRead(BOARD_TOUCH_INT)) { + bool res = touch.read(); + if (res) { + TP_Point p = touch.getPoint(0); + Serial.printf("X:%d Y:%d\n", p.x, p.y); + } + } + delay(5); +} + + + + + + + + + + + + + + + + + diff --git a/examples/Touchpad/utilities.h b/examples/Touchpad/utilities.h new file mode 100644 index 0000000..213798c --- /dev/null +++ b/examples/Touchpad/utilities.h @@ -0,0 +1,56 @@ +/** + * @file utilities.h + * @author Lewis He (lewishe@outlook.com) + * @license MIT + * @copyright Copyright (c) 2023 Shenzhen Xin Yuan Electronic Technology Co., Ltd + * @date 2023-04-11 + * + */ +#pragma once + + + +//! The board peripheral power control pin needs to be set to HIGH when using the peripheral +#define BOARD_POWERON 10 + +#define BOARD_I2S_WS 5 +#define BOARD_I2S_BCK 7 +#define BOARD_I2S_DOUT 6 + +#define BOARD_I2C_SDA 18 +#define BOARD_I2C_SCL 8 + +#define BOARD_BAT_ADC 4 + +#define BOARD_TOUCH_INT 16 +#define BOARD_KEYBOARD_INT 46 + +#define BOARD_SDCARD_CS 39 +#define BOARD_TFT_CS 12 +#define RADIO_CS_PIN 9 + +#define BOARD_TFT_DC 11 +#define BOARD_TFT_BACKLIGHT 42 + +#define BOARD_SPI_MOSI 41 +#define BOARD_SPI_MISO 38 +#define BOARD_SPI_SCK 40 + +#define BOARD_BOOT 0 +#define BOARD_TBOX_UP 3 +#define BOARD_TBOX_DOWN 2 +#define BOARD_TBOX_LEFT 1 +#define BOARD_TBOX_RIGHT 15 + +#define BOARD_ES7210_MCLK 48 +#define BOARD_ES7210_LRCK 21 +#define BOARD_ES7210_SCK 47 +#define BOARD_ES7210_DIN 14 + +#define RADIO_BUSY_PIN 13 +#define RADIO_RST_PIN 17 +#define RADIO_DIO1_PIN 45 + +#define BOARD_BOOT_PIN 0 + +#define BOARD_BL_PIN 42 \ No newline at end of file diff --git a/lib/TouchLib/src/ModulesGT911.tpp b/lib/TouchLib/src/ModulesGT911.tpp index b6e7d79..8745988 100644 --- a/lib/TouchLib/src/ModulesGT911.tpp +++ b/lib/TouchLib/src/ModulesGT911.tpp @@ -74,11 +74,11 @@ public: this->writeRegister(GT911_COMMAND, (uint8_t)0x02); // software reset delay(200); - // int val = readRegister(GT911_MODULE_SWITCH_1); - // val &= 0XFC; - // val |= 0x03; - // this->writeRegister(GT911_MODULE_SWITCH_1, (uint8_t)val); - // delay(200); + int val = readRegister(GT911_MODULE_SWITCH_1); + val &= 0XFC; + val |= 0x03; + this->writeRegister(GT911_MODULE_SWITCH_1, (uint8_t)val); + delay(200); return true; } diff --git a/platformio.ini b/platformio.ini index aa30128..3a53e20 100644 --- a/platformio.ini +++ b/platformio.ini @@ -17,6 +17,7 @@ default_envs = T-Deck ;; Examples only one is valid src_dir = examples/UnitTest ; src_dir = examples/Microphone +; src_dir = examples/Touchpad