Added missing lib https://github.com/Xinyuan-LilyGO/T-Deck/issues/47
This commit is contained in:
@@ -0,0 +1,181 @@
|
||||
# ESP_IDF_TouchDrv_Example
|
||||
|
||||
```
|
||||
The current example only writes the CSTxxx series touch application.
|
||||
The other sensors have not been added, but the methods are the same.
|
||||
```
|
||||
|
||||
|
||||
### Configure the Project
|
||||
|
||||
Open the project configuration menu (`idf.py menuconfig`).
|
||||
|
||||
|
||||
In the `SensorLib Example Configuration` menu:
|
||||
|
||||
* Select the PMU Type in the `SensorLib read and write methods` option,Choose according to the situation
|
||||
1. Implemented using built-in read and write methods (Read and write methods are provided internally by SensorLib, supporting high version esp-idf >= 5.0, and low version methods (< 5.0))
|
||||
2. Implemented using read and write callback methods (Implemented using externally provided methods, suitable for multiple platforms)
|
||||
* In `Sensor SCL GPIO Num` select the clock pin to connect to the PMU,the default is 17
|
||||
* In `Sensor SDA GPIO Num` select the data pin connected to the PMU,the default is 18
|
||||
* Select the interrupt pin connected to the PMU in `Sensor Interrupt Pin`, the default is 16
|
||||
* Select `Sensor reset Pin` , the default is 21
|
||||
* `Master Frequency` The maximum communication frequency defaults to 100000HZ, and you can decide whether to change it according to the situation.
|
||||
|
||||
## How to Use Example
|
||||
|
||||
Before project configuration and build, be sure to set the correct chip target using `idf.py set-target <chip_name>`. default use **esp32s3**
|
||||
|
||||
|
||||
### Build and Flash
|
||||
|
||||
Run `idf.py -p PORT flash monitor` to build, flash and monitor the project.
|
||||
|
||||
(To exit the serial monitor, type ``Ctrl-]``.)
|
||||
|
||||
See the [Getting Started Guide](https://docs.espressif.com/projects/esp-idf/en/latest/get-started/index.html) for full steps to configure and use ESP-IDF to build projects.
|
||||
|
||||
## Example Output
|
||||
|
||||
The output information is to configure the output voltage and enable status of the PMU
|
||||
|
||||
```
|
||||
ESP-ROM:esp32s3-20210327
|
||||
Build:Mar 27 2021
|
||||
rst:0x15 (USB_UART_CHIP_RESET),boot:0xa (SPI_FAST_FLASH_BOOT)
|
||||
Saved PC:0x403788f6
|
||||
SPIWP:0xee
|
||||
mode:DIO, clock div:1
|
||||
load:0x3fce3810,len:0x178c
|
||||
load:0x403c9700,len:0x4
|
||||
load:0x403c9704,len:0xbfc
|
||||
load:0x403cc700,len:0x2d64
|
||||
entry 0x403c9900
|
||||
I (26) boot: ESP-IDF v5.3-dev-1288-g5524b692ee 2nd stage bootloader
|
||||
I (27) boot: compile time Jan 10 2024 22:49:17
|
||||
I (27) boot: Multicore bootloader
|
||||
I (31) boot: chip revision: v0.2
|
||||
I (35) boot.esp32s3: Boot SPI Speed : 80MHz
|
||||
I (40) boot.esp32s3: SPI Mode : DIO
|
||||
I (45) boot.esp32s3: SPI Flash Size : 2MB
|
||||
I (49) boot: Enabling RNG early entropy source...
|
||||
I (55) boot: Partition Table:
|
||||
I (58) boot: ## Label Usage Type ST Offset Length
|
||||
I (66) boot: 0 nvs WiFi data 01 02 00009000 00006000
|
||||
I (73) boot: 1 phy_init RF data 01 01 0000f000 00001000
|
||||
I (81) boot: 2 factory factory app 00 00 00010000 00100000
|
||||
I (88) boot: End of partition table
|
||||
I (92) esp_image: segment 0: paddr=00010020 vaddr=3c020020 size=0e0dch ( 57564) map
|
||||
I (111) esp_image: segment 1: paddr=0001e104 vaddr=3fc93100 size=01f14h ( 7956) load
|
||||
I (113) esp_image: segment 2: paddr=00020020 vaddr=42000020 size=1acb0h (109744) map
|
||||
I (137) esp_image: segment 3: paddr=0003acd8 vaddr=3fc95014 size=00994h ( 2452) load
|
||||
I (138) esp_image: segment 4: paddr=0003b674 vaddr=40374000 size=0f0e0h ( 61664) load
|
||||
I (163) boot: Loaded app from partition at offset 0x10000
|
||||
I (163) boot: Disabling RNG early entropy source...
|
||||
I (163) cpu_start: Multicore app
|
||||
I (176) cpu_start: Pro cpu start user code
|
||||
I (176) cpu_start: cpu freq: 240000000 Hz
|
||||
I (177) cpu_start: Application information:
|
||||
I (177) cpu_start: Project name: ESP_IDF_TouchDrv_Example
|
||||
I (177) cpu_start: App version: v0.1.4-6-gfeaf675-dirty
|
||||
I (177) cpu_start: Compile time: Jan 11 2024 14:01:31
|
||||
I (177) cpu_start: ELF file SHA256: 3ce1527fc...
|
||||
I (178) cpu_start: ESP-IDF: v5.3-dev-1288-g5524b692ee
|
||||
I (178) cpu_start: Min chip rev: v0.0
|
||||
I (178) cpu_start: Max chip rev: v0.99
|
||||
I (178) cpu_start: Chip rev: v0.2
|
||||
I (178) heap_init: Initializing. RAM available for dynamic allocation:
|
||||
I (179) heap_init: At 3FC96290 len 00053480 (333 KiB): RAM
|
||||
I (179) heap_init: At 3FCE9710 len 00005724 (21 KiB): RAM
|
||||
I (179) heap_init: At 3FCF0000 len 00008000 (32 KiB): DRAM
|
||||
I (180) heap_init: At 600FE010 len 00001FD8 (7 KiB): RTCRAM
|
||||
I (181) spi_flash: detected chip: winbond
|
||||
I (181) spi_flash: flash io: dio
|
||||
W (181) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
|
||||
W (181) i2c: This driver is an old driver, please migrate your application code to adapt `driver/i2c_master.h`
|
||||
I (182) sleep: Configure to isolate all GPIO pins in sleep state
|
||||
I (182) sleep: Enable automatic switching of GPIO sleep configuration
|
||||
I (183) main_task: Started on CPU0
|
||||
I (193) main_task: Calling app_main()
|
||||
I (193) gpio: GPIO[16]| InputEn: 1| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:2
|
||||
I (193) I2C: Implemented using read and write callback methods (Use lower version < 5.0 API)
|
||||
I (193) mian: I2C initialized successfully
|
||||
I (193) TOUCH: ----touch_drv_init----
|
||||
0 1 2 3 4 5 6 7 8 9 a b c d e f
|
||||
00: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||
10: -- -- -- -- -- 15 -- -- -- -- -- -- -- -- -- --
|
||||
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||
70: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
|
||||
I (303) TOUCH: Find touch address 0x15
|
||||
I (303) TOUCH: Find touch address 0x15
|
||||
I (303) TOUCH: Implemented using built-in read and write methods (Use lower version < 5.0 API)
|
||||
Using ESP-IDF Driver interface.
|
||||
E (303) i2c: i2c driver install error
|
||||
I (303) gpio: GPIO[21]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
|
||||
I (303) gpio: GPIO[21]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
|
||||
Chip ID:0xb5
|
||||
Version :0x2
|
||||
Touch type:CST816T
|
||||
I (383) TOUCH: Init touch SUCCESS!
|
||||
I (383) TOUCH: Some CST816 will automatically enter sleep,can use the touch.disableAutoSleep() to turn off
|
||||
I (383) gpio: GPIO[21]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
|
||||
I (513) mian: Run...
|
||||
I (513) main_task: Returned from app_main()
|
||||
X[0]:143 Y[0]:127
|
||||
X[0]:143 Y[0]:127
|
||||
X[0]:142 Y[0]:127
|
||||
X[0]:141 Y[0]:126
|
||||
X[0]:138 Y[0]:125
|
||||
X[0]:135 Y[0]:123
|
||||
X[0]:131 Y[0]:121
|
||||
X[0]:126 Y[0]:119
|
||||
X[0]:121 Y[0]:117
|
||||
X[0]:84 Y[0]:146
|
||||
X[0]:85 Y[0]:146
|
||||
X[0]:86 Y[0]:145
|
||||
X[0]:87 Y[0]:143
|
||||
X[0]:88 Y[0]:140
|
||||
X[0]:89 Y[0]:136
|
||||
X[0]:90 Y[0]:132
|
||||
X[0]:91 Y[0]:127
|
||||
X[0]:92 Y[0]:123
|
||||
X[0]:93 Y[0]:119
|
||||
X[0]:94 Y[0]:115
|
||||
X[0]:95 Y[0]:111
|
||||
I (513563) TOUCH: Touch Home button pressed!
|
||||
I (513573) TOUCH: Touch Home button pressed!
|
||||
I (513583) TOUCH: Touch Home button pressed!
|
||||
I (513603) TOUCH: Touch Home button pressed!
|
||||
I (513613) TOUCH: Touch Home button pressed!
|
||||
I (513633) TOUCH: Touch Home button pressed!
|
||||
I (513643) TOUCH: Touch Home button pressed!
|
||||
```
|
||||
|
||||
## Build process example
|
||||
|
||||
Assuming you don't have esp-idf yet
|
||||
|
||||
```
|
||||
mkdir -p ~/esp
|
||||
cd ~/esp
|
||||
git clone --recursive https://github.com/espressif/esp-idf.git
|
||||
git clone https://github.com/lewisxhe/XPowersLib.git
|
||||
cd esp-idf
|
||||
./install.sh
|
||||
. ./export.sh
|
||||
cd ..
|
||||
cd SensorLib/examples/ESP_IDF_Example
|
||||
|
||||
Configure SDA,SCL,INT,RST,Pin
|
||||
...
|
||||
|
||||
idf.py menuconfig
|
||||
idf.py build
|
||||
idf.py -b 921600 flash
|
||||
idf.py monitor
|
||||
|
||||
```
|
||||
Reference in New Issue
Block a user