NetDeck M1: hardware sandbox — full-frame sprite rendering + firmware build

- render into a full-frame RAM second buffer (TFT_eSprite/PSRAM on device,
  SDL shim framebuffer in the emulator) and push to the ST7789 as one
  continuous SPI stream per frame (MiataDrive anti-tearing pattern)
- keyboard stale-byte flush at boot end; device-trackball constants branch
- examples/NetDeck/platformio.ini: self-contained firmware build
  (pio run -d examples/NetDeck), ESP32-S3 compile verified
  (RAM 6.7% / Flash 5.5%), binary at firmware/NetDeck_M1_261114.bin
- STATUS.md: M1 tracker + on-device flashing checklist
- IDEAS.md: capture map-scroll and companion-app ideas
This commit is contained in:
Dejvino
2026-11-14 11:04:24 +01:00
parent 2bfd6c6428
commit 3dcafa25e7
6 changed files with 189 additions and 85 deletions
+29 -8
View File
@@ -7,12 +7,12 @@ milestone lands.
| Milestone | Scope | Status |
| --- | --- | --- |
| **M0 — Emulator** | SDL2 emulator support + M1 surface tested locally | **done** |
| M1 — Hardware Sandbox | Boot on ST7789 DMA, shared tactical view (Cameras/Network) + HUD, cursor, `Space` freeze, `P` view switch | prepared (emulator-verified, needs device bring-up) |
| **M1 — Hardware Sandbox** | Full-frame sprite rendering to ST7789, shared tactical view + HUD, cursor, `Space` freeze, `P` view switch | **compiled + emulator-verified; on-device check pending** |
| M2 — Network Graph & Traces | Node graph in Network view (door nodes on bulkhead tiles), link routing, ICE crack, red trace + `X` sever | planned |
| M3 — Squad vs. Droids | Ship floorplan in Cameras view, 3 marines → beacon, 4 droids, gunfire | planned |
| M4 — Cyber-Physical Bridge | Hive link + `1` FRENZY.EXE turns droids on each other (shared coordinate space) | planned |
## M0 (this milestone)
## M0 (done)
- `src/netdeck/nd_layout.h` — shared constants: 320x192 tactical view + HUD bar
(one coordinate space), palette, fixed-timestep timings.
@@ -28,10 +28,31 @@ milestone lands.
- Emulator: `make APP=NetDeck run` / `smoke` from `emulator/`; host gained `Tab`
key mapping (`emulator/src/main.cpp`).
## M1 remaining (hardware bring-up, same sketch)
## M1 (this milestone)
- ST7789 via DMA double-buffered transfers (two 153.6 KB SRAM DMA buffers).
- Real keyboard-controller init timing + stale-byte grace on device.
- Trackball sensitivity on real hardware (`TB_IMPULSE`/`TB_FRICTION` device branch).
- Frame cost check: full 320x240 redraw must fit ~30 fps at 80 MHz SPI; move to
incremental/two-buffer rendering if not.
- **Flicker-free full-frame rendering** (`examples/NetDeck/NetDeck.ino`):
all drawing goes into a RAM second buffer — `TFT_eSprite fb` (PSRAM,
320x240x16) on device, the SDL shim framebuffer in the emulator — and is
pushed as **one continuous SPI stream** (`present()` → `startWrite() /
fb.pushSprite(0,0) / endWrite()`), the proven MiataDrive anti-tearing
pattern (commit d542d6f).
- **Firmware build**: self-contained `examples/NetDeck/platformio.ini`
(`pio run -d examples/NetDeck`; board + libs resolved against the repo
root `boards/` and `lib/`). ESP32-S3 / arduino-esp32 2.0.9:
**RAM 6.7%, Flash 5.5%**, binary at `firmware/NetDeck_M1_261114.bin`.
- **Keyboard bring-up**: stale-byte flush from the 0x55 controller at boot
end (before the first frame), on top of the 1400 ms boot grace.
- **Trackball device branch**: `TB_IMPULSE`/`TB_FRICTION` constants split
for device vs emulator edge rates.
- Emulator frames are pixel-identical to the M0 baseline (regression
verified: cameras / network / freeze / beacon click).
### Flashing + on-device checklist (needs the physical T-Deck)
1. `pio run -d examples/NetDeck -t upload` (or flash
`firmware/NetDeck_M1_261114.bin`).
2. Boot screen `M1 // SANDBOX` shows for 1.4 s, then the Cameras view.
3. `P` flips to Network view (dimmed ship + labeled graph), `Tab` too.
4. `Space` freezes (CRT scanlines, sim/packets halt); cursor stays live.
5. Trackball: smooth momentum cursor, tile snap in Cameras, node targeting
in Network; Enter = beacon drop / node select; screen tap works too.