diff --git a/examples/Keyboard_T_Deck_Master/Keyboard_T_Deck_Master.ino b/examples/Keyboard_T_Deck_Master/Keyboard_T_Deck_Master.ino new file mode 100644 index 0000000..55717f9 --- /dev/null +++ b/examples/Keyboard_T_Deck_Master/Keyboard_T_Deck_Master.ino @@ -0,0 +1,61 @@ +/** + * @file Keyboard_T_Deck_Master.ino + * @author Lewis He (lewishe@outlook.com) + * @license MIT + * @copyright Copyright (c) 2023 Shenzhen Xin Yuan Electronic Technology Co., Ltd + * @date 2023-05-30 + * + */ +#include +#include + +#define LILYGO_KB_SLAVE_ADDRESS 0x55 + + +#define BOARD_POWERON 10 +#define BOARD_I2C_SDA 18 +#define BOARD_I2C_SCL 8 + + +void setup() +{ + Serial.begin(115200); + + Serial.println("T-Deck Keyboard Master"); + + //!⚠️ The board peripheral power control pin needs to be set to HIGH when using the peripheral + pinMode(BOARD_POWERON, OUTPUT); + digitalWrite(BOARD_POWERON, HIGH); + + // There needs to be a delay after power on, give LILYGO-KEYBOARD some startup time + delay(500); + + Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL); + + // Check keyboard + Wire.requestFrom(LILYGO_KB_SLAVE_ADDRESS, 1); + if (Wire.read() == -1) { + while (1) { + Serial.println("LILYGO Keyboad not online ."); + delay(1000); + } + } +} + +void loop() +{ + // Read key value from esp32c3 + char keyValue = 0; + Wire.requestFrom(LILYGO_KB_SLAVE_ADDRESS, 1); + while (Wire.available() > 0) { + keyValue = Wire.read(); + if (keyValue != (char)0x00) { + Serial.print("keyValue : "); + Serial.println(keyValue); + } + } + delay(5); +} + + +