This commit is contained in:
lewisxhe
2025-06-16 16:04:16 +08:00
parent ef0868fc71
commit ec2dfd955d
2 changed files with 2 additions and 2 deletions
+1 -1
View File
@@ -95,7 +95,7 @@ esptool --chip esp32c3 --baud 921600 --before default_reset --after hard_reset
6. Upload sketch
7. Press the **RST** button to exit download mode
- T-Keyboard the programming and burning interface of ESP32C3 is located at the 6Pin header on the side of the RST button, and the order starts from the top of the RST button, which are 3V3, GND, RST, BOOT, RX, TX, You need to connect USB TO TTL externally to burn the keyboard firmware. For TTL without automatic download circuit, before powering on, short-circuit the BOOT Pin and GND, and then power on. At this time, T-Keyboard will enter the download mode. After the burning is completed, you need to disconnect GND and BOOT before running the program.
- T-Keyboard the programming and burning interface of ESP32C3 is located at the 6Pin header on the side of the RST button, and the order starts from the top of the RST button, which are TX,RX,BOOT,RST,GND,VCC, You need to connect USB TO TTL externally to burn the keyboard firmware. For TTL without automatic download circuit, before powering on, short-circuit the BOOT Pin and GND, and then power on. At this time, T-Keyboard will enter the download mode. After the burning is completed, you need to disconnect GND and BOOT before running the program.
![c3_boot](../images/c3_boot.jpg)