One interface (nd_mapsource.h) now owns everything map-specific: tiles,
rooms/doors/cameras, the network graph (nodes + edges with roles replacing
the hardcoded N_AIRLK/N_DOOR/N_HIVE indices) and the entity spawn list.
The scenario populates its structures once via selectMap() and never checks
which map is active.
- DemoMapSource: self-contained demo grid (moved out of the sketch), demo
node/edge/spawn tables
- GenMapSource: adapts the random MapGenerator — now with L-corridors for
guaranteed connectivity, doors that lead somewhere, airlock pad, terminal
and crates (never on corridor tiles); network graph derived from the room
chain, marine-first spawn list with droid patrols
- NetDeck.ino: all source branching removed; red trace follows the real
active-link path (BFS HIVE->ROOT); reinforcement spawns near the blast door
- Tests: MapTest validates 50 generated runs + demo via the interface with
an airlock flood-fill; new generated-map integration journey; test node
handles resolve through the source (no hardcoded indices)
Root cause (on device): sound_engine zero-initialized i2s_pin_config_t,
leaving mck_io_num == 0. i2s_set_pin() then claimed GPIO0 — an
MCLK-capable pin on the S3 and the trackball centre / BOOT line — as
its MCLK output. Verified on device with a diagnostic build: pin0 read
LOW at idle, exactly one latched FALLING edge, clicks never registered.
- sound_engine: set pins.mck_io_num = I2S_PIN_NO_CHANGE explicitly.
- NetDeck: register the trackball click on release with contact-bounce
collapse (the proven CrtTerminal pattern); pollTouch re-arms when
isPressed() stays true but getPoint() reports no points (stuck GT911
IRQ on some units).
- Emulator parity (so this class of bug dies before flashing):
GPIO-matrix pin-ownership model in the shim — i2s_set_pin() claims
its pins, claimed pins are dead inputs (digitalRead LOW, no edges,
loud WARNING on claim/ISR collisions); host pin writes go through
emu::setPin/togglePin with an edge-accurate ISR latch (a full
press+release pulse between dispatches no longer gets swallowed);
E2E inits SDL_INIT_AUDIO so the I2S path actually runs there.
Regression coverage: e2e/trackball_click (fails on the old engine),
unit/shim_claimed_pin_is_dead_input,
unit/shim_edge_survives_same_dispatch_pulse.
- Makefile: firmware step follows the sketch move (root platformio.ini,
src_dir = src/netdeck).
- HW.md: new notes file for emulator-vs-hardware quirks and the
on-device debugging recipe.
On-device verified: clicks register in both views (beacon drops, node
routing). Fast layer 23 unit + 7 integration green. Note: e2e
boot_and_controls + network_journey failures are pre-existing at HEAD
(reproduced on a clean stash before this change).
Port the shared emulator harness (all apps) to SDL 3.4 + SDL3_ttf 3.2:
- window creation without position args; renderer logical size via
SDL_SetRenderLogicalPresentation(LETTERBOX); SDL_RenderTexture;
SDL_SaveBMP_IO frame dumps
- SDL_EVENT_* event scheme, flattened SDL_KeyboardEvent, float mouse
coords; clicks mapped with SDL_ConvertEventToRenderCoordinates, keeping
the Xwayland global-state cross-check from 260a2b3
- audio shim on the stream API (SDL_OpenAudioDeviceStream +
SDL_PutAudioStreamData) since SDL_QueueAudio is gone
- TTF_RenderText_Blended (explicit length); SDL3_ttf header layout
handled via __has_include (Ubuntu installs under SDL3_ttf/)
- e2e freeze-tint pixel assertions updated to the committed
diagonal-stripe pattern (stale since the freeze rework; pre-existing
failures at HEAD under SDL2), sampled away from the freeze text
Full suite green: 14 unit + 7 integration + 3 E2E journeys, 0 failures.
MissileCommand, MiataDrive, NetDeck build; CrtTerminal (missing sndBlip
declaration) and Lotus3 (sketch not in repo) fail identically at HEAD -
pre-existing, out of scope.
- stampImage16_P(): PROGMEM 16bpp stamp with color-key transparency
(ND_TRANS16 pixels leave the destination untouched) — TFT_eSprite has
no transparent pushImage variant, so it composites via drawPixel on
both backends (sprite RAM on device, host framebuffer in the emulator)
- shim: pgm_read_byte/word/dword macros (flash is memory-mapped on
host and ESP32 alike)
- pattern: 2px checker of black dots + transparent cells — half-visible
dither, map/units stay readable underneath
- E2E now proves the transparency itself: wall pixels survive under
transparent cells, dots render black, key color never rendered
- replace the nonexistent draw16bppSprite_P(NULL,...) call with
pushImage(bx, by, 8, 8, checkered8x8): device = TFT_eSprite::pushImage
(blits into the fb sprite), emulator = new shim TFT_eSPI::pushImage
blit into the host framebuffer — same signature on both backends
- shim: define PROGMEM (no-op on host/ESP32, flash is memory-mapped)
- pattern data fixed into a real 2px checkerboard (black / 0x1F1F teal)
- E2E pixel assertions updated to the checker geometry
Verified: make netdeck (both targets) + full test suite, 0 failures