The ST7789 receives pixel bytes high-byte-first, and TFT_eSprite's
pushSprite sends the sprite buffer raw — which is why the sprite's own
primitives store colors byte-swapped (drawPixel: color = color>>8 |
color<<8). RoomViewCore wrote native little-endian values instead, so
every pixel reached the panel byte-swapped: BG 0x0002 showed as green
(0x0200), the fogged floor 0x0882 as pink (0x8208) — exactly the
symptoms reported from hardware.
The core now stores pixels in panel wire order (toWire byteswap on
store, one 16-bit rotate per pixel); the emulator blit unswaps before
the 565-to-8888 expansion, so its output is pixel-identical. Also add
-O2 to the firmware env: PlatformIO's default -Os optimizes for size
and was likely a large part of the 13 fps report.
Split the sketch into a device-agnostic renderer core (RoomViewCore.h:
RGB565 rasterizer, camera, world sim — no emulator dependencies) plus a
thin emulator shell (keyboard pump + the 565-to-8888 presentation blit).
Add fw/ as a self-contained PlatformIO project (own platformio.ini
pointing at the shared boards/, lib/ and src/netdeck headers — per-env
src_dir is not supported by PlatformIO, so NetDeck's top-level config
stays untouched). fw/RoomViewHW.ino is the firmware twin: the core
rasterizes directly into a TFT_eSprite's frameBuffer() (16-bit, PSRAM)
and presents with the proven NetDeck startWrite/pushSprite/endWrite
pattern. The loop free-runs and reports true throughput over USB serial
every 2 s: fps + average render vs. push split.
Verified: emulator render unchanged (smoke frame identical), pio
RoomViewHW env builds clean for ESP32-S3 (346 KB flash), make netdeck
dual build green.