The fog target is now COL_BG instead of the steel haze: far geometry
converges exactly onto the void color, so the deck dissolves seamlessly
into the background instead of glowing against it.
This exposed and fixed a channel bug in fogMix: the green channel
divided by 64 instead of 32 (blended at half strength). It was
invisible while the fog color's green level matched the walls', but
fading toward g=0 left far walls tinted green. fogMix is now a
weighted average (c*(32-f) + fog*f) with per-channel rounding, exact
at both ends and unbiased in either direction.
The old 'fog' was multiplicative darkening (color scaled toward black),
which reads as shading rather than atmosphere. Geometry now blends
toward a steel haze color (COL_FOG) with camera distance: fogAmt()
maps distance to a 0..32 fixed-point amount between FOG_NEAR/FOG_FAR,
and fogMix() lerps the 5/6/5 channels toward the haze with rounding.
Applied to box faces + top rims, floor quads, network links and
packets. Near geometry stays crisp and saturated; the far corners of
the deck dissolve into the haze, giving a real depth cue.
The ST7789 receives pixel bytes high-byte-first, and TFT_eSprite's
pushSprite sends the sprite buffer raw — which is why the sprite's own
primitives store colors byte-swapped (drawPixel: color = color>>8 |
color<<8). RoomViewCore wrote native little-endian values instead, so
every pixel reached the panel byte-swapped: BG 0x0002 showed as green
(0x0200), the fogged floor 0x0882 as pink (0x8208) — exactly the
symptoms reported from hardware.
The core now stores pixels in panel wire order (toWire byteswap on
store, one 16-bit rotate per pixel); the emulator blit unswaps before
the 565-to-8888 expansion, so its output is pixel-identical. Also add
-O2 to the firmware env: PlatformIO's default -Os optimizes for size
and was likely a large part of the 13 fps report.
Split the sketch into a device-agnostic renderer core (RoomViewCore.h:
RGB565 rasterizer, camera, world sim — no emulator dependencies) plus a
thin emulator shell (keyboard pump + the 565-to-8888 presentation blit).
Add fw/ as a self-contained PlatformIO project (own platformio.ini
pointing at the shared boards/, lib/ and src/netdeck headers — per-env
src_dir is not supported by PlatformIO, so NetDeck's top-level config
stays untouched). fw/RoomViewHW.ino is the firmware twin: the core
rasterizes directly into a TFT_eSprite's frameBuffer() (16-bit, PSRAM)
and presents with the proven NetDeck startWrite/pushSprite/endWrite
pattern. The loop free-runs and reports true throughput over USB serial
every 2 s: fps + average render vs. push split.
Verified: emulator render unchanged (smoke frame identical), pio
RoomViewHW env builds clean for ESP32-S3 (346 KB flash), make netdeck
dual build green.