/** * @file SimpleTone.ino * @author Lewis He (lewishe@outlook.com) * @license MIT * @copyright Copyright (c) 2025 ShenZhen XinYuan Electronic Technology Co., Ltd * @date 2025-09-25 * */ #include #include //! The board peripheral power control pin needs to be set to HIGH when using the peripheral #define BOARD_POWERON 10 // I2S configuration parameters #define I2S_BCK_PIN 7 // Bit clock pin #define I2S_WS_PIN 5 // Word select pin (LRCK) #define I2S_DATA_PIN 6 // Data pin // Sound parameters #define SAMPLE_RATE 8000 // Sampling rate #define BB_FREQ 1000 // BB sound frequency (Hz). 1000Hz sounds more like a beep. #define AMPLITUDE 16384 // Amplitude (moderate volume) #define BEEP_DURATION 100 // Duration of each beep (milliseconds) #define INTERVAL 1000 // Interval between beeps (milliseconds) unsigned long previousMillis = 0; // Record the last beep time bool isBeeping = false; // Check if the sound is playing unsigned long beepStartTime = 0; // Record the start time of this sound void setup() { Serial.begin(115200); //! The board peripheral power control pin needs to be set to HIGH when using the peripheral pinMode(BOARD_POWERON, OUTPUT); digitalWrite(BOARD_POWERON, HIGH); i2s_config_t i2s_config = { .mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_TX), .sample_rate = SAMPLE_RATE, .bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT, .channel_format = I2S_CHANNEL_FMT_ONLY_LEFT, // 单声道 .communication_format = I2S_COMM_FORMAT_STAND_I2S, .intr_alloc_flags = ESP_INTR_FLAG_LEVEL1, // 中断优先级 .dma_buf_count = 8, .dma_buf_len = 64 }; i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL); i2s_pin_config_t pin_config = { .bck_io_num = I2S_BCK_PIN, .ws_io_num = I2S_WS_PIN, .data_out_num = I2S_DATA_PIN, .data_in_num = I2S_PIN_NO_CHANGE }; i2s_set_pin(I2S_NUM_0, &pin_config); } void loop() { unsigned long currentMillis = millis(); if (!isBeeping && currentMillis - previousMillis >= INTERVAL) { isBeeping = true; beepStartTime = currentMillis; previousMillis = currentMillis; } if (isBeeping && currentMillis - beepStartTime >= BEEP_DURATION) { isBeeping = false; } if (isBeeping) { generateBeep(); } else { generateSilence(); } } void generateBeep() { static uint32_t sample_counter = 0; const uint32_t samples_per_cycle = SAMPLE_RATE / BB_FREQ; int16_t samples[128]; for (int i = 0; i < 128; i++) { if ((sample_counter % samples_per_cycle) < (samples_per_cycle / 2)) { samples[i] = AMPLITUDE; } else { samples[i] = -AMPLITUDE; } sample_counter++; } size_t bytes_written; i2s_write(I2S_NUM_0, samples, sizeof(samples), &bytes_written, portMAX_DELAY); } void generateSilence() { int16_t samples[128] = {0}; size_t bytes_written; i2s_write(I2S_NUM_0, samples, sizeof(samples), &bytes_written, portMAX_DELAY); }