#include #include #include #include "utilities.h" typedef struct { uint8_t cmd; uint8_t data[14]; uint8_t len; } lcd_cmd_t; lcd_cmd_t lcd_st7789v[] = { {0x01, {0}, 0 | 0x80}, {0x11, {0}, 0 | 0x80}, {0x3A, {0X05}, 1}, {0x36, {0x55}, 1}, {0xB2, {0x0C, 0x0C, 0X00, 0X33, 0X33}, 5}, {0xB7, {0X75}, 1}, {0xBB, {0X1A}, 1}, {0xC0, {0X2C}, 1}, {0xC2, {0X01}, 1}, {0xC3, {0X13}, 1}, {0xC4, {0X20}, 1}, {0xC6, {0X0F}, 1}, {0xD0, {0XA4, 0XA1}, 2}, {0xD6, {0XA1}, 1}, {0xE0, {0XD0, 0X0D, 0X14, 0X0D, 0X0D, 0X09, 0X38, 0X44, 0X4E, 0X3A, 0X17, 0X18, 0X2F, 0X30}, 14}, {0xE1, {0XD0, 0X09, 0X0F, 0X08, 0X07, 0X14, 0X37, 0X44, 0X4D, 0X38, 0X15, 0X16, 0X2C, 0X3E}, 14}, {0x21, {0}, 0}, //invertDisplay {0x29, {0}, 0}, {0x2C, {0}, 0}, }; TFT_eSPI tft; // LilyGo T-Deck control backlight chip has 16 levels of adjustment range // The adjustable range is 0~15, 0 is the minimum brightness, 16 is the maximum brightness void setBrightness(uint8_t value) { static uint8_t level = 0; static uint8_t steps = 16; if (value == 0) { digitalWrite(BOARD_BL_PIN, 0); delay(3); level = 0; return; } if (level == 0) { digitalWrite(BOARD_BL_PIN, 1); level = steps; delayMicroseconds(30); } int from = steps - level; int to = steps - value; int num = (steps + to - from) % steps; for (int i = 0; i < num; i++) { digitalWrite(BOARD_BL_PIN, 0); digitalWrite(BOARD_BL_PIN, 1); } level = value; } void setup() { Serial.begin(115200); Serial.println("T-DECK factory"); //! The board peripheral power control pin needs to be set to HIGH when using the peripheral pinMode(BOARD_POWERON, OUTPUT); digitalWrite(BOARD_POWERON, HIGH); //! Set CS on all SPI buses to high level during initialization pinMode(BOARD_SDCARD_CS, OUTPUT); pinMode(RADIO_CS_PIN, OUTPUT); pinMode(BOARD_TFT_CS, OUTPUT); digitalWrite(BOARD_SDCARD_CS, HIGH); digitalWrite(RADIO_CS_PIN, HIGH); digitalWrite(BOARD_TFT_CS, HIGH); pinMode(BOARD_SPI_MISO, INPUT_PULLUP); SPI.begin(BOARD_SPI_SCK, BOARD_SPI_MISO, BOARD_SPI_MOSI); //SD Serial.print("Init display id:"); Serial.println(USER_SETUP_ID); tft.begin(); /** * * T-Deck-Plus and T-Deck display panels are different. * * This initialization is used to override the initialization parameters. * * It is used when the display is abnormal after the TFT_eSPI update. */ #if 0 for (uint8_t i = 0; i < (sizeof(lcd_st7789v) / sizeof(lcd_cmd_t)); i++) { tft.writecommand(lcd_st7789v[i].cmd); for (int j = 0; j < (lcd_st7789v[i].len & 0x7f); j++) { tft.writedata(lcd_st7789v[i].data[j]); } if (lcd_st7789v[i].len & 0x80) { delay(120); } } #endif tft.setRotation( 1 ); tft.fillScreen(TFT_BLACK); tft.setTextDatum(MC_DATUM); tft.setFreeFont(&FreeSansOblique12pt7b); tft.drawString("Hello World", TFT_WIDTH / 2, TFT_HEIGHT / 2); pinMode(BOARD_BL_PIN, OUTPUT); for (int i = 0; i <= 16; ++i) { setBrightness(i); delay(30); } } void loop() { tft.setTextColor(random(0xFFFF)); tft.fillScreen(TFT_BLACK); tft.drawString("Hello World", random(5, 320), random(5, 240)); delay(5000); }