✨ LilyGO T-Deck ✨

## **English | [中文](README_CN.MD)** ## 1️⃣ Examples preview ```` examples ├─Keyboard_ESP32C3 # ESP32C3 keyboard I2C slave ├─Microphone # Noise detection └─UnitTest # Factory hardware unit testing ```` ## 2️⃣ Quick Start ### PlatformIO 1. Install [VisualStudioCode](https://code.visualstudio.com/) and [Python](https://www.python.org/) 2. Search for the `PlatformIO` plugin in the `VisualStudioCode` extension and install it. 3. After the installation is complete, you need to restart `VisualStudioCode` 4. After restarting `VisualStudioCode`, select `File` in the upper left corner of `VisualStudioCode` -> `Open Folder` -> select the `T-Deck` directory 5. Click on the `platformio.ini` file, and in the `platformio` column, cancel the sample line that needs to be used, please make sure that only one line is valid 6. Click the (✔) symbol in the lower left corner to compile 7. Connect the board to the computer USB 8. Click (→) to upload firmware 9. Click (plug symbol) to monitor serial output ### ArduinoIDE 1. Install [ArduinoIDE](https://www.arduino.cc/en/software) 2. Copy all the folders in the `T-Deck/lib` directory to ``. If there is no `libraries` directory, please create a new one. Please note that you are not copying the `lib` directory, but copying the folders in the lib directory 3. Open ArduinoIDE -> Tools - Board -> ESP32S3 Dev Module - USB CDC On Boot -> Enable ## Note that you need to change Enable to Disable when USB is not connected, so USB CDC will not prevent the board from starting - CPU Frequency -> 240MHz - USB DFU On Boot -> Disable - Flash Mode -> QIO 80MHz - Flash Size -> 16MB(128Mb) - USB Firmware MSC On Boot -> Disable - PSRAM -> OPI PSRAM - Partition Scheme -> 16M Flash(3MB APP/9.9MB FATFS) - USB Mode -> Hardware CDC and JIAG - Upload Mode -> UART0/Hardware CDC - Upload Speed -> 921600 4. Insert USB into the PC and click Upload ## 3️⃣ Tips: 1. If a microphone is used, the GPIOO button cannot be used ## 4️⃣ Where to buy: 1. [AliExpress]() 2. [LilyGo Store]() ## 5️⃣ Pins: