Files
Dejvino 0f22c6afca Add raylib-esp32 lib and FloorPlan3D demo (3D floor plan via rlsw)
Vendor raylib-esp32 v1.0.3 (63db94b) under lib/ — raylib 6.x core with
the rlsw software renderer plus the ESP32-S3 port layer (SPI display
drivers, async double-buffered flush). raylib/examples, projects, tools
and logo are trimmed (~80 MB of content nothing here compiles); see
lib/raylib-esp32/VENDOR.md for provenance.

New floorplan3d-demo (emulator-template base) renders the NetDeck demo
map (nd_demomap.h) as a 3D floor plan — bulkhead walls, blast door,
cover crates, airlock pad, terminal — through the real on-device 3D
stack on the desktop:

- rcore_emu.c: desktop PLATFORM_CUSTOM layer mirroring rcore_esp32.c,
  flushing the RGB565 sw-renderer buffer into emuGfx::fb instead of SPI
- raylib_emu_config.h: same module/limit defines as the device build
- HUD via 3x5 bitmap font into fb: rlsw's 2D textured-quad path
  (DrawText/DrawRectangle) misplaces/flips quads and samples wrong
  atlas texels in this build; the 3D path is pixel-accurate

Verified: dual build (make netdeck) green, demo smoke test clean at
~59 FPS, 600-frame stability run OK.
2026-11-16 21:46:31 +01:00

55 lines
1.4 KiB
C

#ifndef RAYLIB_ESP32_DISPLAYS_H
#define RAYLIB_ESP32_DISPLAYS_H
#ifdef __cplusplus
extern "C" {
#endif
#include "esp_err.h"
#include "esp_idf_version.h"
// #include "esp_lcd_panel_io.h"
#include "esp_lcd_io_spi.h"
#include "esp_lcd_panel_ops.h"
#include "esp_lcd_panel_vendor.h"
#include "driver/spi_master.h"
#include <stdint.h>
#include <stdbool.h>
/* IDF 4.4 uses void* for the SPI bus handle; IDF 5.x takes spi_host_device_t directly */
#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 0, 0)
#define RAYLIB_LCD_SPI_HOST(h) ((esp_lcd_spi_bus_handle_t)(h))
#else
#define RAYLIB_LCD_SPI_HOST(h) (h)
#endif
typedef enum {
RAYLIB_DRIVER_GC9A01,
RAYLIB_DRIVER_ST7789,
RAYLIB_DRIVER_ST7796S,
RAYLIB_DRIVER_ILI9341,
RAYLIB_DRIVER_CUSTOM,
} raylib_display_driver_e;
typedef struct {
const char *name;
esp_err_t (*init_panel)(spi_host_device_t spi_host,
int pin_cs, int pin_dc, int pin_rst,
uint16_t width, uint16_t height,
uint32_t spi_freq_hz,
esp_lcd_panel_handle_t *out_panel,
esp_lcd_panel_io_handle_t *out_io);
bool needs_invert_color;
bool needs_byte_swap;
uint32_t default_spi_freq_hz;
} raylib_display_driver_t;
const raylib_display_driver_t *raylib_esp32_get_driver(raylib_display_driver_e id);
#ifdef __cplusplus
}
#endif
#endif // RAYLIB_ESP32_DISPLAYS_H