Files
lilygo-t-deck/lib/raylib-esp32/include/drivers/ST7796S/esp_lcd_st7796_interface.h
T
Dejvino 0f22c6afca Add raylib-esp32 lib and FloorPlan3D demo (3D floor plan via rlsw)
Vendor raylib-esp32 v1.0.3 (63db94b) under lib/ — raylib 6.x core with
the rlsw software renderer plus the ESP32-S3 port layer (SPI display
drivers, async double-buffered flush). raylib/examples, projects, tools
and logo are trimmed (~80 MB of content nothing here compiles); see
lib/raylib-esp32/VENDOR.md for provenance.

New floorplan3d-demo (emulator-template base) renders the NetDeck demo
map (nd_demomap.h) as a 3D floor plan — bulkhead walls, blast door,
cover crates, airlock pad, terminal — through the real on-device 3D
stack on the desktop:

- rcore_emu.c: desktop PLATFORM_CUSTOM layer mirroring rcore_esp32.c,
  flushing the RGB565 sw-renderer buffer into emuGfx::fb instead of SPI
- raylib_emu_config.h: same module/limit defines as the device build
- HUD via 3x5 bitmap font into fb: rlsw's 2D textured-quad path
  (DrawText/DrawRectangle) misplaces/flips quads and samples wrong
  atlas texels in this build; the 3D path is pixel-accurate

Verified: dual build (make netdeck) green, demo smoke test clean at
~59 FPS, 600-frame stability run OK.
2026-11-16 21:46:31 +01:00

46 lines
1.2 KiB
C

/*
* SPDX-FileCopyrightText: 2024 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#pragma once
#include "esp_err.h"
#include "esp_lcd_types.h"
#include "esp_lcd_panel_vendor.h"
#include "soc/soc_caps.h"
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief Initialize ST7796 LCD panel with SPI/I80 interface
*
* @param[in] io LCD panel IO handle
* @param[in] panel_dev_config LCD panel device configuration
* @param[out] ret_panel LCD panel handle
* @return
* - ESP_OK: Success
* - Otherwise: Fail
*/
esp_err_t esp_lcd_new_panel_st7796_general(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config, esp_lcd_panel_handle_t *ret_panel);
#if SOC_MIPI_DSI_SUPPORTED
/**
* @brief Initialize ST7796 LCD panel with MIPI interface
*
* @param[in] io LCD panel IO handle
* @param[in] panel_dev_config LCD panel device configuration
* @param[out] ret_panel LCD panel handle
* @return
* - ESP_OK: Success
* - Otherwise: Fail
*/
esp_err_t esp_lcd_new_panel_st7796_mipi(const esp_lcd_panel_io_handle_t io, const esp_lcd_panel_dev_config_t *panel_dev_config,
esp_lcd_panel_handle_t *ret_panel);
#endif
#ifdef __cplusplus
}
#endif