Files
lilygo-t-deck/tron-room-demo/fw/platformio.ini
T
Dejvino 23b3c88caa tron-room-demo: store the framebuffer in panel wire order (fixes swapped colors on HW)
The ST7789 receives pixel bytes high-byte-first, and TFT_eSprite's
pushSprite sends the sprite buffer raw — which is why the sprite's own
primitives store colors byte-swapped (drawPixel: color = color>>8 |
color<<8). RoomViewCore wrote native little-endian values instead, so
every pixel reached the panel byte-swapped: BG 0x0002 showed as green
(0x0200), the fogged floor 0x0882 as pink (0x8208) — exactly the
symptoms reported from hardware.

The core now stores pixels in panel wire order (toWire byteswap on
store, one 16-bit rotate per pixel); the emulator blit unswaps before
the 565-to-8888 expansion, so its output is pixel-identical. Also add
-O2 to the firmware env: PlatformIO's default -Os optimizes for size
and was likely a large part of the 13 fps report.
2026-11-16 22:49:06 +01:00

36 lines
1.1 KiB
INI

; PlatformIO project for the tron-room-demo hardware benchmark.
;
; Standalone on purpose (the repo's top-level platformio.ini keeps
; src_dir = src/netdeck for NetDeck): this points back at the shared
; boards/, lib/ and src/netdeck/ headers, so the firmware twin of the
; emulator sketch builds without touching anything NetDeck depends on.
;
; pio run -d tron-room-demo/fw -t upload # flash the T-Deck
; pio device monitor # fps report every 2 s
;
; Free-running benchmark: no frame pacing. The serial line
; RoomViewHW: N frames in M ms = X fps | render Y ms, push Z ms
; is the true throughput of the shared RoomViewCore renderer + SPI push.
[platformio]
default_envs = RoomViewHW
src_dir = .
boards_dir = ../../boards
lib_dir = ../../lib
[env:RoomViewHW]
platform = espressif32@6.3.0
board = T-Deck
framework = arduino
upload_speed = 921600
monitor_speed = 115200
build_flags =
-DBOARD_HAS_PSRAM=1
-DCORE_DEBUG_LEVEL=1
-DARDUINO_USB_CDC_ON_BOOT=1
-DDISABLE_ALL_LIBRARY_WARNINGS
-DSPI_FREQUENCY=80000000
-O2
-I../../src/netdeck
-I..