Files
lilygo-t-deck/platformio.ini
T
Dejvino 7dfdc06e6f Add NoiseSensor radar example and fix short sound playback
The sound task used to zero the I2S TX DMA ring as soon as the event
queue drained. i2s_write() only queues samples, so anything shorter than
the ~64 ms ring was erased before it reached the speaker. Enable
tx_desc_auto_clear instead, which clears each descriptor after the DMA
has actually transmitted it.

Also add the NoiseSensor radar example and point the default PlatformIO
environment at it.
2026-11-12 08:14:19 +01:00

89 lines
2.3 KiB
INI

; PlatformIO Project Configuration File
;
; Build options: build flags, source filter
; Upload options: custom upload port, speed and extra flags
; Library options: dependencies, extra library storages
; Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html
[wifi]
ssid = ${sysenv.PIO_WIFI_SSID}
password = ${sysenv.PIO_WIFI_PASSWORD}
[platformio]
; default_envs = T-Keyboard
; src_dir = examples/Keyboard_ESP32C3
; Please comment out the following when compiling the T-Keyboard
default_envs = T-Deck
;; Examples only one is valid
; src_dir = examples/UnitTest
; src_dir = examples/Microphone
; src_dir = examples/Touchpad
;src_dir = examples/lvgl_example
; src_dir = examples/Keyboard_T_Deck_Master
; src_dir = examples/GPSShield
; src_dir = examples/LoRaWAN_Starter
; src_dir = examples/I2SPlay
; src_dir = examples/LvglArduinoVNC_VGA
; src_dir = examples/SimpleTone
;src_dir = examples/CrtTerminal
src_dir = examples/NoiseSensor
; src_dir = examples/MissileCommand
;! Don't make changes
boards_dir = boards
[env:T-Keyboard]
platform = espressif32@6.9.0
board = ttgo-t-oi-plus
framework = arduino
board_build.flash_mode = dio
[env:T-Deck]
platform = espressif32@6.3.0
board = T-Deck
framework = arduino
upload_speed = 921600
monitor_speed = 115200
build_flags =
-DBOARD_HAS_PSRAM=1
-DCORE_DEBUG_LEVEL=1
; Enable UARDUINO_ USB_ CDC_ ON_ BOOT will start printing and wait for terminal access during startup
-DARDUINO_USB_CDC_ON_BOOT=1
; Enable UARDUINO_USB_CDC_ON_BOOT will turn off printing and will not block when using the battery
; -UARDUINO_USB_CDC_ON_BOOT
'-DWIFI_SSID="${wifi.ssid}"'
'-DWIFI_PASSWORD="${wifi.password}"'
-DDISABLE_ALL_LIBRARY_WARNINGS
-DRADIOLIB_EXCLUDE_CC1101
-DRADIOLIB_EXCLUDE_NRF24
-DRADIOLIB_EXCLUDE_RF69
-DRADIOLIB_EXCLUDE_SX1231
-DRADIOLIB_EXCLUDE_SI443X
-DRADIOLIB_EXCLUDE_RFM2X
-DRADIOLIB_EXCLUDE_SX127X
; -DRADIOLIB_EXCLUDE_STM32WLX
; -DRADIOLIB_EXCLUDE_SX128X
-DRADIOLIB_EXCLUDE_AFSK
-DRADIOLIB_EXCLUDE_AX25
-DRADIOLIB_EXCLUDE_HELLSCHREIBER
-DRADIOLIB_EXCLUDE_MORSE
-DRADIOLIB_EXCLUDE_RTTY
-DRADIOLIB_EXCLUDE_SSTV
-DRADIOLIB_EXCLUDE_DIRECT_RECEIVE
-DRADIOLIB_EXCLUDE_APRS
-DRADIOLIB_EXCLUDE_BELL