Files
lilygo-t-deck/lib/SensorsLib/examples/XL9555_ExtensionIOInterrupt/XL9555_ExtensionIOInterrupt.ino
T

84 lines
2.4 KiB
Arduino

/**
*
* @license MIT License
*
* Copyright (c) 2022 lewis he
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* @file XL9555_ExtensionIOInterrupt.ino
* @author Lewis He (lewishe@outlook.com)
* @date 2023-01-03
*
*/
#include <Wire.h>
#include <SPI.h>
#include <Arduino.h>
#include <time.h>
#include "ExtensionIOXL9555.hpp"
#ifndef SENSOR_SDA
#define SENSOR_SDA 17
#endif
#ifndef SENSOR_SCL
#define SENSOR_SCL 18
#endif
#ifndef SENSOR_IRQ
#define SENSOR_IRQ -1
#endif
ExtensionIOXL9555 extIO;
void setup()
{
Serial.begin(115200);
while (!Serial);
// Device address 0x20~0x27
if (!extIO.begin(Wire, XL9555_SLAVE_ADDRESS4, SENSOR_SDA, SENSOR_SCL)) {
Serial.println("Failed to find XL9555 - check your wiring!");
while (1) {
delay(1000);
}
}
pinMode(SENSOR_IRQ, INPUT_PULLUP);
// Set PORT0 as input,mask = 0xFF = all pin input
extIO.configPort(ExtensionIOXL9555::PORT0, 0xFF);
// Set PORT1 as input,mask = 0xFF = all pin input
extIO.configPort(ExtensionIOXL9555::PORT1, 0xFF);
}
void loop()
{
// When the interrupt occurs, we read the mask value of PORT
if (digitalRead(SENSOR_IRQ) == LOW) {
Serial.print("PORT0:0b");
Serial.print(extIO.readPort(ExtensionIOXL9555::PORT0), BIN);
Serial.print("\tPORT1:0b");
Serial.println(extIO.readPort(ExtensionIOXL9555::PORT1), BIN);
}
}