Files
lilygo-t-deck/lib/Arduino_GFX/src/display/Arduino_ILI9486.h
T
2024-09-19 11:13:25 +08:00

118 lines
3.7 KiB
C++

/*
* start rewrite from:
* https://github.com/nopnop2002/esp-idf-parallel-tft
*/
#ifndef _ARDUINO_ILI9486_H_
#define _ARDUINO_ILI9486_H_
#include <Arduino.h>
#include <Print.h>
#include "../Arduino_GFX.h"
#include "../Arduino_TFT.h"
#define ILI9486_TFTWIDTH 320 ///< ILI9486 max TFT width
#define ILI9486_TFTHEIGHT 480 ///< ILI9486 max TFT height
#define ILI9486_RST_DELAY 120 ///< delay ms wait for reset finish
#define ILI9486_SLPIN_DELAY 120 ///< delay ms wait for sleep in finish
#define ILI9486_SLPOUT_DELAY 150 ///< delay ms wait for sleep out finish
#define ILI9486_NOP 0x00 ///< No-op register
#define ILI9486_SWRESET 0x01 ///< Software reset register
#define ILI9486_RDDID 0x04 ///< Read display identification information
#define ILI9486_RDDST 0x09 ///< Read Display Status
#define ILI9486_SLPIN 0x10 ///< Enter Sleep Mode
#define ILI9486_SLPOUT 0x11 ///< Sleep Out
#define ILI9486_PTLON 0x12 ///< Partial Mode ON
#define ILI9486_NORON 0x13 ///< Normal Display Mode ON
#define ILI9486_RDMODE 0x0A ///< Read Display Power Mode
#define ILI9486_RDMADCTL 0x0B ///< Read Display MADCTL
#define ILI9486_RDPIXFMT 0x0C ///< Read Display Pixel Format
#define ILI9486_RDIMGFMT 0x0D ///< Read Display Image Format
#define ILI9486_RDSELFDIAG 0x0F ///< Read Display Self-Diagnostic Result
#define ILI9486_INVOFF 0x20 ///< Display Inversion OFF
#define ILI9486_INVON 0x21 ///< Display Inversion ON
#define ILI9486_GAMMASET 0x26 ///< Gamma Set
#define ILI9486_DISPOFF 0x28 ///< Display OFF
#define ILI9486_DISPON 0x29 ///< Display ON
#define ILI9486_CASET 0x2A ///< Column Address Set
#define ILI9486_PASET 0x2B ///< Page Address Set
#define ILI9486_RAMWR 0x2C ///< Memory Write
#define ILI9486_RAMRD 0x2E ///< Memory Read
#define ILI9486_MADCTL 0x36 ///< Memory Access Control
#define ILI9486_PIXFMT 0x3A ///< COLMOD: Pixel Format Set
#define ILI9486_GMCTRP1 0xE0 ///< Positive Gamma Correction
#define ILI9486_GMCTRN1 0xE1 ///< Negative Gamma Correction
#define ILI9486_MADCTL_MY 0x80 ///< Bottom to top
#define ILI9486_MADCTL_MX 0x40 ///< Right to left
#define ILI9486_MADCTL_MV 0x20 ///< Reverse Mode
#define ILI9486_MADCTL_ML 0x10 ///< LCD refresh Bottom to top
#define ILI9486_MADCTL_RGB 0x00 ///< Red-Green-Blue pixel order
#define ILI9486_MADCTL_BGR 0x08 ///< Blue-Green-Red pixel order
#define ILI9486_MADCTL_MH 0x04 ///< LCD refresh right to left
#define ILI9486_MADCTL_SS 0x02
#define ILI9486_MADCTL_GS 0x01
static const uint8_t ili9486_init_operations[] = {
BEGIN_WRITE,
WRITE_COMMAND_8, ILI9486_SWRESET,
END_WRITE,
DELAY, ILI9486_RST_DELAY,
BEGIN_WRITE,
WRITE_COMMAND_8, ILI9486_SLPOUT,
END_WRITE,
DELAY, ILI9486_SLPOUT_DELAY,
BEGIN_WRITE,
WRITE_C8_D8, ILI9486_PIXFMT, 0x55, // 16 bit colour interface
WRITE_C8_D8, 0xC2, 0x44,
WRITE_COMMAND_8, 0xC5,
WRITE_BYTES, 4, 0x00, 0x00, 0x00, 0x00,
WRITE_COMMAND_8, 0xE0,
WRITE_BYTES, 15,
0x0F, 0x1F, 0x1C, 0x0C, 0x0F,
0x08, 0x48, 0x98, 0x37, 0x0A,
0x13, 0x04, 0x11, 0x0D, 0x00,
WRITE_COMMAND_8, 0xE1,
WRITE_BYTES, 15,
0x0F, 0x32, 0x2E, 0x0B, 0x0D,
0x05, 0x47, 0x75, 0x37, 0x06,
0x10, 0x03, 0x24, 0x20, 0x00,
WRITE_C8_D8, 0x36, 0x48,
WRITE_COMMAND_8, 0x29, // display on
END_WRITE,
DELAY, ILI9486_SLPOUT_DELAY};
class Arduino_ILI9486 : public Arduino_TFT
{
public:
Arduino_ILI9486(Arduino_DataBus *bus, int8_t rst = GFX_NOT_DEFINED, uint8_t r = 0, bool ips = false);
bool begin(int32_t speed = GFX_NOT_DEFINED) override;
void setRotation(uint8_t r) override;
void writeAddrWindow(int16_t x, int16_t y, uint16_t w, uint16_t h) override;
void invertDisplay(bool) override;
void displayOn() override;
void displayOff() override;
protected:
void tftInit() override;
private:
};
#endif