Files
lilygo-t-deck/examples/NetDeck/platformio.ini
T
Dejvino 3dcafa25e7 NetDeck M1: hardware sandbox — full-frame sprite rendering + firmware build
- render into a full-frame RAM second buffer (TFT_eSprite/PSRAM on device,
  SDL shim framebuffer in the emulator) and push to the ST7789 as one
  continuous SPI stream per frame (MiataDrive anti-tearing pattern)
- keyboard stale-byte flush at boot end; device-trackball constants branch
- examples/NetDeck/platformio.ini: self-contained firmware build
  (pio run -d examples/NetDeck), ESP32-S3 compile verified
  (RAM 6.7% / Flash 5.5%), binary at firmware/NetDeck_M1_261114.bin
- STATUS.md: M1 tracker + on-device flashing checklist
- IDEAS.md: capture map-scroll and companion-app ideas
2026-11-14 11:04:24 +01:00

30 lines
988 B
INI

; NetDeck — Breach & Board firmware (Milestone 1 hardware sandbox)
;
; The root platformio.ini's src_dir is global, so this sketch ships its own
; project config: build with pio run -d examples/NetDeck
; Board + shared library discovery point back at the repo root.
[platformio]
default_envs = T-Deck
boards_dir = ../../boards
; sketch lives at the project root (the emulator Makefile includes it from
; there), so scan the project root instead of a src/ folder
src_dir = .
[env:T-Deck]
platform = espressif32@6.3.0
board = T-Deck
framework = arduino
lib_extra_dirs = ../../lib
upload_speed = 921600
monitor_speed = 115200
build_flags =
-DBOARD_HAS_PSRAM=1
-DCORE_DEBUG_LEVEL=1
-DARDUINO_USB_CDC_ON_BOOT=1
-DDISABLE_ALL_LIBRARY_WARNINGS
; Full-frame push needs headroom: 80 MHz halves the frame transfer vs the
; stock 40 MHz (same setting as the other full-frame sketches). If the
; panel shows artifacts, drop to 40000000.
-DSPI_FREQUENCY=80000000