Files
lilygo-t-deck/lib/raylib-esp32/examples/model_loading/src/main.cpp
T
Dejvino 0f22c6afca Add raylib-esp32 lib and FloorPlan3D demo (3D floor plan via rlsw)
Vendor raylib-esp32 v1.0.3 (63db94b) under lib/ — raylib 6.x core with
the rlsw software renderer plus the ESP32-S3 port layer (SPI display
drivers, async double-buffered flush). raylib/examples, projects, tools
and logo are trimmed (~80 MB of content nothing here compiles); see
lib/raylib-esp32/VENDOR.md for provenance.

New floorplan3d-demo (emulator-template base) renders the NetDeck demo
map (nd_demomap.h) as a 3D floor plan — bulkhead walls, blast door,
cover crates, airlock pad, terminal — through the real on-device 3D
stack on the desktop:

- rcore_emu.c: desktop PLATFORM_CUSTOM layer mirroring rcore_esp32.c,
  flushing the RGB565 sw-renderer buffer into emuGfx::fb instead of SPI
- raylib_emu_config.h: same module/limit defines as the device build
- HUD via 3x5 bitmap font into fb: rlsw's 2D textured-quad path
  (DrawText/DrawRectangle) misplaces/flips quads and samples wrong
  atlas texels in this build; the 3D path is pixel-accurate

Verified: dual build (make netdeck) green, demo smoke test clean at
~59 FPS, 600-frame stability run OK.
2026-11-16 21:46:31 +01:00

77 lines
2.0 KiB
C++

#include <Arduino.h>
#include <raylib_esp32.h>
#include <raylib.h>
static Camera3D camera = {0};
static Model model = {0};
static bool model_loaded = false;
void setup()
{
Serial.begin(115200);
Serial.println("raylib-esp32 model_loading example");
raylib_esp32_display_config_t disp = {
.driver = RAYLIB_DRIVER_GC9A01,
.spi_host = SPI2_HOST,
.pin_sclk = 12,
.pin_mosi = 11,
.pin_cs = 10,
.pin_dc = 9,
.pin_rst = 8,
.pin_bl = 7,
.width = 240,
.height = 240,
.spi_freq_hz = 40000000,
};
ESP_ERROR_CHECK(raylib_esp32_init(&disp));
/*
* Mount LittleFS. Put your .glb / .obj files in the data/ folder
* and upload with: pio run -t uploadfs
*/
esp_err_t fs_ret = raylib_esp32_mount_fs("/data", "spiffs");
if (fs_ret != ESP_OK) {
Serial.printf("FS mount failed: %d\n", fs_ret);
}
InitWindow(240, 240, "model_loading");
camera.position = (Vector3){5.0f, 5.0f, 5.0f};
camera.target = (Vector3){0.0f, 0.0f, 0.0f};
camera.up = (Vector3){0.0f, 1.0f, 0.0f};
camera.fovy = 45.0f;
camera.projection = CAMERA_PERSPECTIVE;
model = LoadModel("/data/model.glb");
model_loaded = (model.meshCount > 0);
if (!model_loaded) {
Serial.println("Model not found — showing fallback cube. "
"Upload a model.glb to the data/ folder.");
}
}
void loop()
{
BeginDrawing();
ClearBackground(RAYWHITE);
BeginMode3D(camera);
if (model_loaded) {
DrawModel(model, (Vector3){0}, 1.0f, WHITE);
} else {
DrawCube((Vector3){0}, 2.0f, 2.0f, 2.0f, SKYBLUE);
DrawCubeWires((Vector3){0}, 2.0f, 2.0f, 2.0f, DARKBLUE);
}
DrawGrid(10, 1.0f);
EndMode3D();
DrawFPS(4, 4);
if (!model_loaded) {
DrawText("No model.glb found", 10, 220, 10, RED);
}
EndDrawing();
}