Files
lilygo-t-deck/emulator/tests
Dejvino a6ea66d646 Denser encounter: camera nodes, wider garrison, thicker walls
- Map: 6 new wall pillars/stubs + 4 new cover crates; all load-bearing
  fixtures (blast door, airlock, terminal, LOS/fog test lines) preserved
- Network: 4 -> 7 nodes, 3 -> 6 edges; new Camera node type (C_CAMERA)
  sees farther (FOG_CAM_R=6 vs FOG_NODE_R=3) and draws a dotted sight
  ring when online; fog radius is now a per-node sight field
- Garrison: 8 -> 12 units (room-1 patrol, server-room guard, corridor
  patrol, turret on the door approach)
- Fix link slot/edge index conflation in linkOnEdge(): out-of-order
  routes (e.g. JUNC-CAM1 in slot 1) shadowed JUNC-DOOR with a permanent
  LINKING... refusal; NetLink now carries its edge id
- Tests: unit/fog_camera_sees_farther, unit/link_slots_dont_shadow_edges
  (verified failing against the old code)
2026-11-15 14:56:55 +01:00
..

NetDeck headless tests

Three layers, all running on the host (no device needed). The sketch is compiled into each test binary as a single translation unit (the same #include APP_INO trick emulator/src/main.cpp uses), which gives tests direct access to the sketch's internal statics — no refactor required to make the game testable.

Layers

Layer Binary Speed What it drives Assertions
Unit NetDeck-tests ms pure logic directly: bfsPath, losClear, tryLink, severLink, stepSim ticks game state
Integration NetDeck-tests ms subsystems through their entry points: pollKeyboard → handleKey, clicks → registerClick, multi-tick sim scenarios state + serial transcript
E2E NetDeck-e2e (separate build) ~1–2 min the real thing: setup() → loop() iterations, boot grace, inputs through the device pipeline (0x55 keyboard queue, GT911 touch state, trackball pin ISRs) serial transcript + framebuffer pixels

E2E is a separate build because it is real-time paced (the scenario runs at 20 Hz wall time) and needs SDL/TTF runtime for text rendering; everything else is deterministic and instant.

Running

make netdeck-test        # everything: unit + integration + E2E   (from repo root)
make netdeck-test-unit   # fast layer only
make netdeck-test-e2e    # E2E only

From emulator/ directly: make test APP=NetDeck, make test-e2e APP=NetDeck. Both binaries accept a name-prefix filter: ./NetDeck-tests unit, ./NetDeck-tests integration/daemon, ./NetDeck-e2e e2e/network.

Adding tests

  • Unit: append a TEST(unit/your_case) block to tests/unit_tests.h. Call freshScenario() first (fixed RNG seed + clean state). Step time with stepTicks(n) — 20 ticks = 1 s of sim, no wall time.
  • Integration: append TEST(integration/your_case) to tests/integration_tests.h. Drive input via test::typeKey() + pollKeyboard(), clickNode() / clickTile(), then stepTicks().
  • E2E: append TEST(e2e/your_journey) to tests/e2e_tests.cpp. Start with reboot(), schedule inputs with schedule(t, 'key') / scheduleTap(t, x, y) (seconds after journey start), pump with pumpUntil(deadline, donePredicate), assert with test::serialHas() and test::pixelIs565().

Conventions / gotchas

  • freshScenario() resets the scenario AND the view mode (resetScenario deliberately keeps the view); reboot() additionally rewinds the boot phase, which plain setup() does not do.
  • The serial transcript is a 512-line ring (Serial.sink); clear it with test::serialClear() before the stretch you assert on, or assert right after the event (combat logs can flood it).
  • Sim RNG is seeded (0xC0FFEE) — combat hit/miss rolls are reproducible per seed, but not across libcs. Prefer structural assertions (someone took damage / link dropped) over exact hit counts.
  • Keypress timing in E2E must clear the 1.4 s boot grace (schedule keys at t ≥ 2.0 s).
  • The firmware build itself is exercised by make netdeck — the Arduino preprocessor catches things the emulator TU does not (e.g. prototype injection vs custom-type parameters).