Files
lilygo-t-deck/lib/TFT_eSPI/User_Setups/Setup210_LilyGo_T_Deck.h
T
Dejvino d542d6ffa7 MiataDrive: flicker-free framebuffer rendering + 80 MHz SPI
Render every frame into a full-frame TFT_eSprite (16 bpp, PSRAM) and push
it to the panel in one continuous SPI stream — direct scattered draw calls
raced the panel scan-out and flickered. renderRoad split into projection
and draw passes: the sky now fills down to the topmost road row (fixes the
stale band at the horizon over crests) and the nearest segment is extended
to the screen bottom (fixes the wobbling stale strip). fillTrap uses
incremental edge interpolation. SPI raised to 80 MHz via build flag
(Setup210 define guarded) so the frame push fits the 33 ms budget.
2026-11-12 23:17:43 +01:00

55 lines
2.1 KiB
C

// ST7789 240 x 280 display with no chip select line
#define USER_SETUP_ID 210
#define ST7789_DRIVER // Configure all registers
#define TFT_WIDTH 240
#define TFT_HEIGHT 320
// #define CGRAM_OFFSET // Library will add offsets required
#define TFT_RGB_ORDER TFT_RGB // Colour order Red-Green-Blue
// #define TFT_RGB_ORDER TFT_BGR // Colour order Blue-Green-Red
#define INIT_SEQUENCE_2 //Different gamma values
// #define TFT_INVERSION_ON
// #define TFT_INVERSION_OFF //For the first sample of T-Deck need to turn on color inversion
// DSTIKE stepup
//#define TFT_DC 23
//#define TFT_RST 32
//#define TFT_MOSI 26
//#define TFT_SCLK 27
// Generic ESP32 setup
#define TFT_MISO 38
#define TFT_MOSI 41
#define TFT_SCLK 40
#define TFT_CS 12 // Not connected
#define TFT_DC 11
#define TFT_RST -1 // Connect reset to ensure display initialises
#define TFT_BACKLIGHT_ON 1
// #define TFT_BL 42 //Turn off backlight function by default
#define LOAD_GLCD // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
#define LOAD_FONT2 // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
#define LOAD_FONT4 // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
#define LOAD_FONT6 // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
#define LOAD_FONT7 // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
#define LOAD_FONT8 // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
//#define LOAD_FONT8N // Font 8. Alternative to Font 8 above, slightly narrower, so 3 digits fit a 160 pixel TFT
#define LOAD_GFXFF // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
#define SMOOTH_FONT
// #define SPI_FREQUENCY 27000000
#ifndef SPI_FREQUENCY // can be overridden from the PlatformIO build flags
#define SPI_FREQUENCY 40000000
#endif
#define SPI_READ_FREQUENCY 20000000
#define SPI_TOUCH_FREQUENCY 2500000
// #define SUPPORT_TRANSACTIONS