Finish the migration: all 65 scenes on the identity artifacts

Two helpers made the bulk of it mechanical. `inkStroke` is a drop-in for
sigEdge — the same line at the identity's weight rather than the track's — and
`castForm` is a drop-in for sigForm, same signature so call sites do not change
shape. With those in place the substitution table is one-to-one:

    sigForm(  -> castForm(     sigShape( -> castMain(     sigEdge( -> inkStroke(

Forty-seven scenes went through that pass in one run: twenty-six take the cast
and the ink, twenty-one take the ink alone. Then the gate ran over all sixty-five
and found three the pass had broken, which is the entire reason it exists.

Spectrum Sculpture rendered pure black. It had been using sigShape as a RADIAL
METRIC rather than drawing it, and the cast carries notches and a hollow — an
annulus used as a radius turns a sculpture inside out. Reverted to sigShape and
dropped to ink only. The lesson generalises: a scene that reads a form as
geometry is not a scene that draws it, and the classifier cannot tell those
apart from the source.

Eclipse Field stopped honouring its `style` trait. It opts out of surface grain,
so sigEdge was its only style evidence, and the ink replaced it. The trait claim
is now dropped — and so is the lint change that had let inkMask count as style
evidence, which was wrong and was hiding exactly this. A trait is a property of
the track a scene may honour; an artifact is content it draws. Taking the ink
says nothing about whether a scene responds to u_sigLine.

Circuit Bloom went empty at the bottom of its `grown` range, where the pads were
carried by a hairline and the ink's stroke is thinner than the edge it replaced.
Now filled as well as stroked.

Also: the backtick check now covers every shader literal rather than only the
preamble, because a mechanical pass over sixty files reintroduced one
immediately. Three rounds lost to that typo is enough.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

flow-state/src/engine/shader-contract.js

@@ -452,6 +452,33 @@ float inkMask(float d, vec2 uv) {
     return clamp(max(fillA, line), 0.0, 1.0);
 }
 
+/**
+ * Outline only, in the song's hand. The drop-in replacement for sigEdge.
+ *
+ * sigEdge draws a line at the track's line weight; this draws it at the
+ * identity's, which is the same idea one layer up. Kept separate from inkMask
+ * because a scene that only ever wanted an edge should not suddenly acquire a
+ * fill when it migrates.
+ */
+float inkStroke(float d) {
+    float soft = mix(0.03, 0.0015, clamp(u_inkEdge, 0.0, 1.0));
+    float w = 0.004 + u_inkWeight * 0.055;
+    return smoothstep(w + soft, w - soft, abs(d));
+}
+
+/**
+ * The protagonist as a filled, inked mask at a point. Replaces sigForm.
+ *
+ * Same signature as the thing it supersedes so the substitution is mechanical
+ * across the library — see MIGRATION.md. uv is recomputed here rather than
+ * passed, so the call site does not have to change shape.
+ */
+float castForm(vec2 p, vec2 centre, float size) {
+    float s = max(size, 1e-3);
+    vec2 uv = vec2(p.x / u_aspect, p.y) * 0.5 + 0.5;
+    return inkMask(castMain((p - centre) / s) * s, uv);
+}
+
 /** The track's value structure. Off unless the identity asked for it. */
 vec3 inkValue(vec3 col) {
     if (u_inkPosterize < 1.5) return col;

flow-state/src/scenes/shader/analog-wow.js

@@ -17,6 +17,7 @@ export const analogWow = {
     family: 'glitch',
     kind: 'fragment',
     texture: 0.9,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -46,7 +47,7 @@ vec3 programme(vec2 q, float t) {
     col += pal(4) * smoothstep(0.85, 1.0, sat(0.5 + 0.5 * sin(q.x * 3.0 - t * 1.3))) * 0.25;
     // The boundary between bands is drawn in the track's weight, so even a
     // damaged signal is damaged in the video's own hand.
-    col += pal(4) * sigEdge(fract(band) - 0.5) * (0.15 + u_sigLine * 0.9);
+    col += pal(4) * inkStroke(fract(band) - 0.5) * (0.15 + u_sigLine * 0.9);
     return col * 0.7;
 }
 
@@ -92,7 +93,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = mix(col, pal(2) * hash12(vec2(uv.x * 300.0, floor(t * 12.0))), sw * 0.6);
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/apollonian-gasket.js

@@ -14,6 +14,7 @@ export const apollonianGasket = {
     kind: 'fragment',
     // Drawn geometry; grain only muddies the small discs.
     texture: 0.3,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -88,14 +89,14 @@ vec4 scene(vec2 uv, vec2 p) {
     vec3 col = pal(0) * 0.06;
     col += palRamp(gen) * edge * (0.55 + u_rim * 0.7);
     col += palRamp(gen + 0.25) * glow * u_rim * 0.4;
-    col += pal(4) * sigEdge(d) * 0.5;
+    col += pal(4) * inkStroke(d) * 0.5;
 
     // Fill the interiors faintly so the discs are objects and not just outlines.
     col += palRamp(gen + 0.5) * smoothstep(0.0, -0.06, d) * 0.12;
 
     col *= 0.7 + 0.3 * exp(-dot(p, p) * 0.2);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/aqueduct-march.js

@@ -21,6 +21,7 @@ export const aqueductMarch = {
     family: 'structural',
     kind: 'fragment',
     texture: 0.9,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -61,7 +62,7 @@ float tier(vec2 q, float bays, float top, float bottom, float shift) {
 
     // The opening sits low in the tier, leaving a solid band above it to carry
     // the next tier — which is the whole structural point of an aqueduct.
-    float hole = sigShape(local) * min(cw, ch) * k;
+    float hole = castMain(local) * min(cw, ch) * k;
     return smoothstep(-0.004, 0.004, hole);
 }
 
@@ -110,7 +111,7 @@ vec4 scene(vec2 uv, vec2 p) {
         vec3 masonry = mix(pal(2) * 0.35, pal(4) * 0.8, sat(q.x * 0.4 + 0.5));
         masonry *= 0.7 + (0.15 + u_sigLine * 0.5) * course;
         masonry += pal(3) * u_sunlight * 0.22 * sat(q.x * 0.5 + 0.5);
-        masonry += pal(4) * sigEdge(0.5 - abs(fract(q.x * u_bays) - 0.5) - 0.03) * (0.1 + u_sigLine * 0.9);
+        masonry += pal(4) * inkStroke(0.5 - abs(fract(q.x * u_bays) - 0.5) - 0.03) * (0.1 + u_sigLine * 0.9);
 
         float hazed = mix(1.0, 0.55, fk * u_recede);
         col = mix(col, masonry * hazed, stone * base);
@@ -118,7 +119,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col = sigAir(col, p, smoothstep(-0.2, 0.9, p.y - horizon));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/aurora-veil.js

@@ -13,6 +13,7 @@ export const auroraVeil = {
     name: 'Aurora Veil',
     family: 'flow',
     kind: 'fragment',
+    consumes: ['ink'],
     traits: ['camera', 'space', 'style'],
 
     params: {
@@ -73,7 +74,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col = sigAir(col, p, smoothstep(0.0, 1.6, abs(p.x)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/balance-stack.js

@@ -17,6 +17,7 @@ export const balanceStack = {
     name: 'Balance Stack',
     family: 'minimal',
     kind: 'fragment',
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -102,7 +103,7 @@ vec4 scene(vec2 uv, vec2 p) {
         x += u_lean * size * 1.6 + sin(t * 1.3 + fi * 0.7) * 0.012 * fi;
 
         vec2 at = vec2(x, y);
-        float d = sigShape((p - at) / size) * size;
+        float d = castMain((p - at) / size) * size;
 
         // Body: shaded across the form, so it has a lit side and a dark side.
         float lit = sat(dot(normalize(p - at + 1e-4), lightDir) * 0.5 + 0.5);
@@ -110,13 +111,13 @@ vec4 scene(vec2 uv, vec2 p) {
         col = mix(col, body, smoothstep(0.004, -0.004, d));
 
         // Rim: the sun catching the edge, in the track's line weight.
-        col += pal(4) * sigEdge(d) * (0.3 + u_rim * 0.9) * (0.4 + lit * 0.8);
+        col += pal(4) * inkStroke(d) * (0.3 + u_rim * 0.9) * (0.4 + lit * 0.8);
         y += size;
     }
 
     col = sigAir(col, p, smoothstep(0.1, 1.5, abs(p.x) * 0.7 + sat(above * 0.5)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/block-mosh.js

@@ -11,6 +11,7 @@ export const blockMosh = {
     family: 'glitch',
     kind: 'fragment',
     // Personality: see look/Personality.js.
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -74,7 +75,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col += pal(2) * u_burst * (0.5 + 0.5 * blk) * (0.5 + 0.5 * beat);
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/cargo-belt.js

@@ -15,6 +15,7 @@ export const cargoBelt = {
     kind: 'fragment',
     // Takes the track's surface grain, but lightly — this is drawn, not filmed.
     texture: 0.4,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -65,11 +66,11 @@ vec4 scene(vec2 uv, vec2 p) {
         if (rnd > u_gap) {
             vec2 local = vec2((withinCell - 0.5) * 2.0, dy / max(span * 0.5, 1e-3));
             float size = u_crateSize * (0.7 + rnd * 0.5);
-            float d = sigShape(local / max(size, 1e-3)) * size;
+            float d = castMain(local / max(size, 1e-3)) * size;
 
             vec3 crateColor = pal(int(mod(cell + fi, 4.0)) + 1);
             col = mix(col, crateColor * (0.35 + rnd * 0.5), smoothstep(0.02, -0.02, d));
-            col += crateColor * sigEdge(d) * (0.4 + u_lamp * 0.5);
+            col += crateColor * inkStroke(d) * (0.4 + u_lamp * 0.5);
 
             // Lamp on a minority of crates, pulsing on the beat. Local, not
             // whole-frame: a per-crate blink is not a flash.
@@ -82,7 +83,7 @@ vec4 scene(vec2 uv, vec2 p) {
     }
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/cell-divide.js

@@ -15,6 +15,7 @@ export const cellDivide = {
     name: 'Cell Divide',
     family: 'organic',
     kind: 'fragment',
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -95,13 +96,13 @@ vec4 scene(vec2 uv, vec2 p) {
     // Nucleus, in the track's signature form.
     if (u_nucleus > 0.01) {
         float size = u_nucleus * 0.35;
-        float d = sigShape((p - nearestAt) / max(size, 1e-3)) * size;
+        float d = castMain((p - nearestAt) / max(size, 1e-3)) * size;
         col = mix(col, pal(1), smoothstep(0.008, -0.008, d) * 0.85);
-        col += pal(2) * sigEdge(d) * (0.35 + u_glow * 0.4);
+        col += pal(2) * inkStroke(d) * (0.35 + u_glow * 0.4);
     }
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/circuit-bloom.js

@@ -15,6 +15,7 @@ export const circuitBloom = {
     kind: 'fragment',
     // Takes the track's surface grain, but lightly — this is drawn, not filmed.
     texture: 0.4,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -91,13 +92,17 @@ vec4 scene(vec2 uv, vec2 p) {
 
     // Pads sit where both traces meet, stamped in the signature form.
     if (horizontal > 0.5 && vertical > 0.5 && rnd2 > 1.0 - u_pads) {
-        float d = sigShape(f / max(u_padSize, 1e-3)) * u_padSize;
+        float d = castMain(f / max(u_padSize, 1e-3)) * u_padSize;
         col += pal(2) * smoothstep(0.01, -0.01, d) * reach * 0.7;
-        col += pal(3) * sigEdge(d) * reach * (0.4 + u_pulse * 0.4);
+        // Filled as well as stroked. At the bottom of the 'grown' range the pads
+        // were a hairline and nothing else, and the ink's stroke can be thinner
+        // than the edge it replaced — which left the frame empty at grown=0.25.
+        col = mix(col, pal(3), inkMask(d, uv) * reach * 0.6);
+        col += pal(3) * inkStroke(d) * reach * (0.4 + u_pulse * 0.4);
     }
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/classic-wave.js

@@ -9,6 +9,7 @@ export const classicWave = {
     // Personality: see look/Personality.js.
     // Smooth concentric colour: grain only mutes the ramp it is built on.
     texture: 0,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -38,7 +39,7 @@ vec4 scene(vec2 uv, vec2 p) {
     p = sigCamera(p);
     // The rings take the track's signature form: round tracks get circles,
     // hexagonal tracks get hexagonal rings, and it costs one call.
-    float d = sigShape(p) + 1.0;
+    float d = castMain(p) + 1.0;
     float angle = atan(p.y, p.x);
     float t = u_time * u_speed + u_seed;
 
@@ -66,7 +67,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col *= 0.6 + 0.4 * (1.0 - smoothstep(0.8, 1.8, d));
     col += sigGrain(uv);
 
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/curl-flow.js

@@ -9,6 +9,7 @@ export const curlFlow = {
     family: 'flow',
     kind: 'fragment',
     // Personality: see look/Personality.js.
+    consumes: ['ink'],
     traits: ['camera', 'space', 'style'],
 
     params: {
@@ -81,7 +82,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col *= 0.6 + 0.4 * exp(-dot(p, p) * 0.35);
     col = sigAir(col, p, smoothstep(0.0, 1.7, length(p)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/data-aisle.js

@@ -12,6 +12,7 @@ export const dataAisle = {
     family: 'structural',
     kind: 'fragment',
     texture: 0.6,
+    consumes: ['ink'],
     traits: ['camera', 'space', 'style'],
 
     params: {
@@ -62,7 +63,7 @@ vec3 wall(vec2 at, float side, float t, float lightAmount) {
     float bright = mix(0.25, 1.0, busy);
 
     col += palRamp(0.55 + id * 0.35) * led * bright * lightAmount * 1.8;
-    col += pal(4) * sigEdge(seam - seamW) * (0.15 + u_sigLine * 0.9);
+    col += pal(4) * inkStroke(seam - seamW) * (0.15 + u_sigLine * 0.9);
     return col;
 }
 
@@ -106,7 +107,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = mix(col, pal(1) * 0.12, sat(far * u_haze));
     col = sigAir(col, p, far);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/droste-feedback.js

@@ -22,6 +22,7 @@ export const drosteFeedback = {
     family: 'glitch',
     kind: 'fragment',
     texture: 0.5,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -54,7 +55,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     vec3 col = pal(0) * 0.05;
     col += palRamp(0.2 + fbm(p * 2.0 + t, 3) * 0.2) * smoothstep(0.02, -0.02, ring) * (0.5 + u_bloom * 0.8);
-    col += pal(4) * sigEdge(ring) * (0.3 + u_bloom * 0.9);
+    col += pal(4) * inkStroke(ring) * (0.3 + u_bloom * 0.9);
     col += pal(3) * exp(-abs(d) * 9.0) * u_bloom * 0.35;
 
     // The loop: read the previous frame from a slightly LARGER, slightly turned
@@ -77,7 +78,7 @@ vec4 scene(vec2 uv, vec2 p) {
     // Vignette, which also stops the corner content being recycled forever.
     col *= 0.75 + 0.25 * exp(-dot(p, p) * 0.35);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/dust-chamber.js

@@ -13,6 +13,7 @@ export const dustChamber = {
     name: 'Dust Chamber',
     family: 'minimal',
     kind: 'fragment',
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -77,13 +78,13 @@ vec4 scene(vec2 uv, vec2 p) {
 
         float lit = exp(-pow((at.x - axis) / max(halfWidth, 1e-3), 2.0) * 2.0);
         float pulse = 0.55 + 0.45 * sin(t * 2.0 + s * 3.0);
-        float m = sigForm(p, at, u_moteSize * (0.6 + hash11(s + 3.3)));
+        float m = castForm(p, at, u_moteSize * (0.6 + hash11(s + 3.3)));
         col += pal(3) * m * lit * pulse * (0.5 + beam);
     }
 
     col = sigAir(col, p, smoothstep(0.0, 1.5, length(p)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/eclipse-field.js

@@ -18,7 +18,12 @@ export const eclipseField = {
     kind: 'fragment',
     // Crisp line work: the track's surface grain would only fur the edges.
     texture: 0,
-    traits: ['shape', 'camera', 'space', 'style'],
+    consumes: ['cast', 'ink'],
+    // No `style`: this scene opts out of surface grain (texture: 0) and its only
+    // other style evidence was sigEdge, which the migration replaced with the
+    // ink. Traits and artifacts are different layers, so taking the ink does not
+    // earn the trait back. See MIGRATION.md.
+    traits: ['shape', 'camera', 'space'],
 
     params: {
         size:      { type: 'float', range: [0.2, 0.85],  default: 0.45, uniform: 'u_size' },
@@ -47,7 +52,7 @@ vec4 scene(vec2 uv, vec2 p) {
     vec2 discAt = vec2(0.0, sigHorizonY() * 0.25);
 
     // Distance to the occluder's edge, in the track's form.
-    float d = sigShape((p - discAt) / max(u_size, 1e-3)) * u_size;
+    float d = castMain((p - discAt) / max(u_size, 1e-3)) * u_size;
 
     // The source behind it.
     float toLight = length(p - lightAt);
@@ -76,11 +81,11 @@ vec4 scene(vec2 uv, vec2 p) {
 
     // The occluder: not pure black, so it reads as an object rather than a hole.
     col = mix(col, pal(0) * 0.12, smoothstep(0.004, -0.004, d));
-    col += pal(3) * sigEdge(d) * (0.4 + u_corona * 0.5);
+    col += pal(3) * inkStroke(d) * (0.4 + u_corona * 0.5);
 
     col = sigAir(col, p, smoothstep(0.0, 1.7, length(p)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/flora.js

@@ -12,6 +12,7 @@ export const flora = {
     family: 'organic',
     kind: 'fragment',
     // Personality: see look/Personality.js.
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -48,7 +49,7 @@ float petal(vec2 p, vec2 node, vec2 dir, float len, float width) {
     float across = dot(off, perp);
     float taper = 0.6 + 0.4 * sat(along / max(len, 1e-3));
     vec2 q = vec2(along / max(len, 1e-3), across / max(width * taper, 1e-3));
-    float form = sigForm(q * 0.5, vec2(0.0), 0.5);
+    float form = castForm(q * 0.5, vec2(0.0), 0.5);
     float clip = smoothstep(0.0, -0.1, along) * smoothstep(len + 0.12, len * 0.72, along);
     return form * clip;
 }
@@ -105,13 +106,13 @@ vec4 scene(vec2 uv, vec2 p) {
         for (int k = 0; k < 6; k++) {
             float a = 6.2831853 * (float(k) + 0.5) / 6.0 + s;
             vec2 off = vec2(cos(a), sin(a)) * u_leaf * (0.30 + 0.2 * beat);
-            bloom += sigForm(p - vec2(tipX, tipY), off, u_leaf * 0.5);
+            bloom += castForm(p - vec2(tipX, tipY), off, u_leaf * 0.5);
         }
         col = mix(col, pal(2), sat(bloom) * u_bud * (0.6 + 0.4 * beat));
     }
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/gate-corridor.js

@@ -16,6 +16,7 @@ export const gateCorridor = {
     kind: 'fragment',
     // Takes the track's surface grain, but lightly — this is drawn, not filmed.
     texture: 0.4,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -62,7 +63,7 @@ vec4 scene(vec2 uv, vec2 p) {
         float phase = fract((fi / float(u_gates)) + t);
         float scale = u_aperture * exp(phase * 3.2) * 0.35;
 
-        float d = abs(sigShape(q / max(scale, 1e-3)) * max(scale, 1e-3));
+        float d = abs(castMain(q / max(scale, 1e-3)) * max(scale, 1e-3));
 
         // Near gates are drawn thicker and brighter: the only depth cue that
         // matters once the geometry is right.
@@ -83,7 +84,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col = sigAir(col, p, 1.0 - smoothstep(0.0, 1.2, length(q)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/girder-lattice.js

@@ -17,6 +17,7 @@ export const girderLattice = {
     kind: 'fragment',
     // Crisp line work: the track's surface grain would only fur the edges.
     texture: 0,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -58,7 +59,7 @@ vec4 scene(vec2 uv, vec2 p) {
     if (above <= 0.001) {
         col = sigAir(col, p, 1.0);
         col += sigGrain(uv);
-        return vec4(col, 1.0);
+        return vec4(inkValue(col), 1.0);
     }
 
     float best = 1e3;
@@ -94,9 +95,9 @@ vec4 scene(vec2 uv, vec2 p) {
         }
 
         if (u_plate > 0.004) {
-            float pd = sigShape((p - vec2(halfW0, y0)) / u_plate) * u_plate;
+            float pd = castMain((p - vec2(halfW0, y0)) / u_plate) * u_plate;
             plateHit = min(plateHit, pd);
-            pd = sigShape((p - vec2(-halfW0, y0)) / u_plate) * u_plate;
+            pd = castMain((p - vec2(-halfW0, y0)) / u_plate) * u_plate;
             plateHit = min(plateHit, pd);
         }
 
@@ -109,7 +110,7 @@ vec4 scene(vec2 uv, vec2 p) {
     float steel = smoothstep(weight, weight * 0.3, best);
 
     col = mix(col, pal(2) * (0.3 + above * 0.5), steel);
-    col += pal(3) * sigEdge(best - weight) * 0.4;
+    col += pal(3) * inkStroke(best - weight) * 0.4;
 
     // Joint plates.
     col = mix(col, pal(4) * 0.7, smoothstep(0.006, -0.006, plateHit));

flow-state/src/scenes/shader/horizon-lines.js

@@ -9,6 +9,7 @@ export const horizonLines = {
     // Personality: see look/Personality.js.
     // Crisp line work: the track's surface grain would only fur the edges.
     texture: 0,
+    consumes: ['ink'],
     traits: ['space', 'camera', 'style'],
 
     params: {
@@ -80,7 +81,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col *= 0.55 + 0.45 * exp(-dot(p, p) * 0.5);
     col = sigAir(col, p, smoothstep(0.0, 1.6, abs(p.y)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/ink-bleed.js

@@ -13,6 +13,7 @@ export const inkBleed = {
     name: 'Ink Bleed',
     family: 'organic',
     kind: 'fragment',
+    consumes: ['ink'],
     traits: ['camera', 'space', 'style'],
 
     params: {
@@ -73,7 +74,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col = sigAir(col, p, smoothstep(0.0, 1.7, length(p)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/isometric-blocks.js

@@ -13,6 +13,7 @@ export const isometricBlocks = {
     family: 'geometric',
     kind: 'fragment',
     texture: 0.6,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -102,7 +103,7 @@ vec4 scene(vec2 uv, vec2 p) {
         // squashed by the tilt — so every block in the field is the same
         // silhouette as every other subject in the video.
         vec2 q = vec2(fx, (p.y - groundY - h) / tilt);
-        float dTop = sigShape(q / (u_plan * cw)) * (u_plan * cw);
+        float dTop = castMain(q / (u_plan * cw)) * (u_plan * cw);
         float topMask = smoothstep(0.004, -0.004, dTop);
 
         vec3 top = mix(pal(2), pal(3), sat(h / max(u_height, 1e-3))) * 0.8;
@@ -112,12 +113,12 @@ vec4 scene(vec2 uv, vec2 p) {
         // a flash.
         float picked = step(0.75, hash12(cell * 3.17 + 5.0));
         col += pal(3) * topMask * picked * u_beat * 0.45;
-        col += pal(4) * sigEdge(dTop) * (0.2 + u_light * 1.2) * step(0.0, dy);
+        col += pal(4) * inkStroke(dTop) * (0.2 + u_light * 1.2) * step(0.0, dy);
     }
 
     col *= 0.75 + 0.25 * exp(-dot(p, p) * 0.3);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/kaleido-tunnel.js

@@ -8,6 +8,7 @@ export const kaleidoTunnel = {
     // Personality: see look/Personality.js.
     // Hard grid lines on flat colour: grain reads as dirt on the lens.
     texture: 0,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -37,7 +38,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     // Cross-section measured in the signature form: the tunnel mouth is the
     // track's shape rather than a circle.
-    float radius = max(sigShape(p) + 1.0, 1e-4);
+    float radius = max(castMain(p) + 1.0, 1e-4);
     vec2 folded = kaleido(p, sides);
     float angle = atan(folded.y, folded.x);
 
@@ -65,7 +66,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col += pal(3) * (1.0 - fade) * u_glow * 0.6;
     col += sigGrain(uv);
 
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/karman-street.js

@@ -13,6 +13,7 @@ export const karmanStreet = {
     family: 'flow',
     kind: 'fragment',
     texture: 0.7,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -92,14 +93,14 @@ vec4 scene(vec2 uv, vec2 p) {
     col += pal(2) * sat(-vort) * u_glow * 0.5;
 
     // The obstacle: still, solid, with the stream piling up on its nose.
-    float d = sigShape((p - origin) / u_body) * u_body;
+    float d = castMain((p - origin) / u_body) * u_body;
     col = mix(col, pal(0) * 0.1, smoothstep(0.005, -0.005, d));
-    col += pal(4) * sigEdge(d) * (0.5 + u_glow * 0.5);
+    col += pal(4) * inkStroke(d) * (0.5 + u_glow * 0.5);
     col += pal(4) * exp(-abs(d) * 14.0) * smoothstep(0.1, -0.3, p.x - origin.x) * u_glow * 0.35;
 
     col = sigAir(col, p, smoothstep(0.0, 1.6, length(p - origin) * 0.7));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/magnet-lines.js

@@ -14,6 +14,7 @@ export const magnetLines = {
     kind: 'fragment',
     // Line work. Grain furs it up, so take only a dusting.
     texture: 0.5,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -77,16 +78,16 @@ vec4 scene(vec2 uv, vec2 p) {
     // lint: fixed-cost — the same three poles
     for (int i = 0; i < 3; i++) {
         vec2 c = poleAt(i, t);
-        float d = sigShape((p - c) / u_core) * u_core;
+        float d = castMain((p - c) / u_core) * u_core;
         vec3 tint = mod(float(i), 2.0) < 0.5 ? pal(3) : pal(4);
         col = mix(col, tint * 0.25, smoothstep(0.004, -0.004, d));
-        col += tint * sigEdge(d) * (0.5 + u_glow * 0.6);
+        col += tint * inkStroke(d) * (0.5 + u_glow * 0.6);
         col += tint * exp(-abs(d) * 12.0) * u_glow * 0.25;
     }
 
     col *= 0.7 + 0.3 * exp(-dot(p, p) * 0.3);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/neon-city.js

@@ -12,6 +12,7 @@ export const neonCity = {
     family: 'structural',
     kind: 'fragment',
     // Personality: see look/Personality.js.
+    consumes: ['ink'],
     traits: ['space', 'camera', 'style'],
 
     params: {
@@ -115,7 +116,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = sigAir(col, p, smoothstep(0.0, 1.4, length(p)));
     col += sigGrain(uv);
 
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/pendulum-trace.js

@@ -15,6 +15,7 @@ export const pendulumTrace = {
     kind: 'fragment',
     // Fine line work; grain only furs it up.
     texture: 0.25,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -86,7 +87,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = max(col, prev(uv) * u_persist);
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/pitch-shatter.js

@@ -10,6 +10,7 @@ export const pitchShatter = {
     family: 'glitch',
     kind: 'fragment',
     // Personality: see look/Personality.js.
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -68,7 +69,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col += pal(int(mod(slice, 5.0))) * (1.0 - sliceRand) * u_glow * 0.3 * sliceRand;
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/psychedelic-drift.js

@@ -10,6 +10,7 @@ export const psychedelicDrift = {
     family: 'glitch',
     kind: 'fragment',
     // Personality: see look/Personality.js.
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -108,7 +109,7 @@ vec4 scene(vec2 uv, vec2 p) {
         // characters includes the one every other scene is built from.
         if (kind == 0.0)      d = sdStar(sp, size, 5.0 + floor(hash11(s * 1.2) * 3.0));
         else if (kind == 1.0) d = sdSmiley(sp, size, u_time, fi);
-        else                  d = sigShape(sp / max(size, 1e-3)) * size;
+        else                  d = castMain(sp / max(size, 1e-3)) * size;
 
         float hit = 0.0;
         for (int j = 0; j < 5; j++) {
@@ -130,7 +131,7 @@ vec4 scene(vec2 uv, vec2 p) {
     }
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/pylon-grid.js

@@ -11,6 +11,7 @@ export const pylonGrid = {
     // Personality: see look/Personality.js.
     // Takes the track's surface grain, but lightly — this is drawn, not filmed.
     texture: 0.4,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'space'],
 
     params: {
@@ -72,7 +73,7 @@ vec4 scene(vec2 uv, vec2 p) {
             // Crown stamped in the track's signature form.
             vec2 crown = vec2(cx, yTop);
             float size = (0.06 + 0.2 * scale) * (1.0 + u_beat * 0.4);
-            col += pal(3) * sigForm(p, crown, size) * inten * (0.6 + u_pulse);
+            col += pal(3) * castForm(p, crown, size) * inten * (0.6 + u_pulse);
             col += pal(int(mod(fr, 4.0))) * exp(-dot(p - crown, p - crown) * 60.0) * u_pulse * depthShade;
         }
     }
@@ -80,7 +81,7 @@ vec4 scene(vec2 uv, vec2 p) {
     // Ground haze and the shared air between here and the horizon.
     col = sigAir(col, p, smoothstep(0.0, 1.6, abs(p.y - hy)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/quasicrystal.js

@@ -16,6 +16,7 @@ export const quasicrystal = {
     kind: 'fragment',
     // Crisp line work: the track's surface grain would only fur the edges.
     texture: 0,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -67,11 +68,11 @@ vec4 scene(vec2 uv, vec2 p) {
     // Ridges: where the sum crosses zero, which is the aperiodic skeleton.
     float ridge = 1.0 - abs(shaped);
     col += pal(4) * pow(sat(ridge), 6.0) * u_glow;
-    col += pal(3) * sigEdge(shaped) * u_glow * 0.3;
+    col += pal(3) * inkStroke(shaped) * u_glow * 0.3;
 
     col *= 0.65 + 0.35 * exp(-dot(p, p) * 0.22);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/salt-flat.js

@@ -13,6 +13,7 @@ export const saltFlat = {
     name: 'Salt Flat',
     family: 'minimal',
     kind: 'fragment',
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -68,14 +69,14 @@ vec4 scene(vec2 uv, vec2 p) {
     // The one object: small, on the horizon, in the track's form.
     if (u_monolith > 0.005) {
         vec2 at = vec2(u_standing, horizon + u_monolith * 0.9);
-        float d = sigShape((p - at) / u_monolith) * u_monolith;
+        float d = castMain((p - at) / u_monolith) * u_monolith;
         col = mix(col, pal(0) * 0.12, smoothstep(0.006, -0.006, d));
-        col += pal(4) * sigEdge(d) * (0.3 + u_glowBand * 0.5);
+        col += pal(4) * inkStroke(d) * (0.3 + u_glowBand * 0.5);
     }
 
     col = sigAir(col, p, smoothstep(0.0, 1.4, abs(p.x)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/scale-mosaic.js

@@ -15,6 +15,7 @@ export const scaleMosaic = {
     family: 'organic',
     kind: 'fragment',
     texture: 0.8,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -62,7 +63,7 @@ vec4 scene(vec2 uv, vec2 p) {
     // back to screen distance at the end. A scale is therefore as wide as its
     // slice of the turn and as tall as its ring — wider ones further out, which
     // is what growing on a cone looks like.
-    float d = sigShape(f / max(rad, 1e-3)) * max(rad, 1e-3) * u_growth * r;
+    float d = castMain(f / max(rad, 1e-3)) * max(rad, 1e-3) * u_growth * r;
 
     // Shade by lift, so the surface has a direction of light across it.
     float shade = 0.3 + 0.7 * sat(0.5 + lift * 1.4);
@@ -72,7 +73,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = mix(col, body * 0.6, smoothstep(0.004, -0.02, d));
 
     // Rim light along every scale edge, in the track's line weight.
-    col += pal(4) * sigEdge(d) * (0.3 + u_sheen * 0.8);
+    col += pal(4) * inkStroke(d) * (0.3 + u_sheen * 0.8);
 
     // A specular sweep across the whole head, which is what makes hundreds of
     // separate tiles read as one surface.
@@ -81,7 +82,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col *= 0.72 + 0.28 * exp(-r * r * 0.3);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/scan-tear.js

@@ -10,6 +10,7 @@ export const scanTear = {
     family: 'glitch',
     kind: 'fragment',
     // Personality: see look/Personality.js.
+    consumes: ['ink'],
     traits: ['style'],
 
     params: {
@@ -73,7 +74,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col += pal(4) * torn * u_shift * 0.6;
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/shoji-grid.js

@@ -14,6 +14,7 @@ export const shojiGrid = {
     kind: 'fragment',
     // Paper has a tooth, and this is the one scene that wants it.
     texture: 1.0,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -67,10 +68,10 @@ vec4 scene(vec2 uv, vec2 p) {
     if (u_form > 0.01) {
         float which = step(0.62, hash12(cell * 1.7 + 9.0));
         vec2 at = vec2(f.x * 2.0 / float(u_cols), f.y * 2.0 / float(u_rows));
-        float d = sigShape(at / u_form) * u_form;
+        float d = castMain(at / u_form) * u_form;
         col = mix(col, col * 0.35 + pal(4) * glowField * 0.35,
                   smoothstep(0.01, -0.01, d) * which);
-        col += pal(4) * sigEdge(d) * which * glowField * 0.7;
+        col += pal(4) * inkStroke(d) * which * glowField * 0.7;
     }
 
     // The frame. Opaque, in front of everything, and the thing that makes the
@@ -78,10 +79,10 @@ vec4 scene(vec2 uv, vec2 p) {
     float bar = min(0.5 - abs(f.x), 0.5 - abs(f.y));
     float wood = smoothstep(u_stile, u_stile * 0.4, bar);
     col = mix(col, pal(0) * 0.14, wood);
-    col += pal(4) * sigEdge(bar - u_stile) * 0.12;
+    col += pal(4) * inkStroke(bar - u_stile) * 0.12;
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/signal-decay.js

@@ -10,6 +10,7 @@ export const signalDecay = {
     name: 'Signal Decay',
     family: 'glitch',
     kind: 'fragment',
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -101,7 +102,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = max(col, prev(uv) * u_persist);
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/silk-ribbon.js

@@ -11,6 +11,7 @@ export const silkRibbon = {
     // Personality: see look/Personality.js.
     // A soft drape of light. Grain furs the one thing it is made of.
     texture: 0,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -74,7 +75,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = mix(col, pal(2), exp(-knot * knot * 30.0) * u_glow * 0.5);
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/slow-orb.js

@@ -14,6 +14,7 @@ export const slowOrb = {
     // the one where speckle is most visible for being least justified. It keeps
     // its own `grain` param, which exists to stop large flat areas banding.
     texture: 0,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -43,7 +44,7 @@ vec4 scene(vec2 uv, vec2 p) {
     // The body is the track's signature form — this scene is one shape in an
     // empty frame, so the shape had better be the track's.
     float wobble = fbm(q * 2.4 + t, 4) * u_wobble;
-    float d = (sigShape(q / max(u_size, 1e-3)) * u_size) * (1.0 + wobble);
+    float d = (castMain(q / max(u_size, 1e-3)) * u_size) * (1.0 + wobble);
 
     // TRAIT style: the body's edge is drawn in the track's hand. The scene's
     // u_softness says how soft this orb is; u_sigSoft says how soft this VIDEO
@@ -54,7 +55,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     // A rim in the track's line weight, so a sharp-handed track gets a defined
     // limb against the halo instead of only a softer gradient.
-    float rim = sigEdge(d) * u_sigLine;
+    float rim = inkStroke(d) * u_sigLine;
 
     vec3 col = pal(0) * 0.05;
     col = mix(col, pal(1), body * 0.85);
@@ -67,7 +68,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col += (hash12(uv * 640.0 + floor(u_frame)) - 0.5) * u_grain * 0.08;
     col += sigGrain(uv);
 
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/spectrum-sculpture.js

@@ -12,6 +12,7 @@ export const spectrumSculpture = {
     // Personality: see look/Personality.js.
     // Takes the track's surface grain, but lightly — this is drawn, not filmed.
     texture: 0.4,
+    consumes: ['ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -65,8 +66,11 @@ vec4 scene(vec2 uv, vec2 p) {
     float seg = 6.28318530718 / bars;
 
     float angle = atan(p.y, p.x) + t * seg;
-    // Radial extent measured in the track's form, so the sculpture is built on
+    // Radial extent measured in the track's SIGNATURE form, not in the cast.
-    // the same outline as everything else in the video.
+    // This is a metric, not a subject: the cast carries notches and a hollow,
+    // and an annulus used as a radius turns the sculpture inside out — it
+    // rendered pure black. A scene that reads a form as geometry rather than
+    // drawing it wants sigShape, and the migration should leave it alone.
     float radius = sigShape(p) + 1.0;
     float index = floor((angle + 3.14159265) / seg);
     float cellAngle = mod(angle + 3.14159265, seg) / seg;
@@ -91,10 +95,10 @@ vec4 scene(vec2 uv, vec2 p) {
     col += palRamp(slot * 0.7 + 0.15) * inBar * shape * (0.6 + band);
 
     // Inner ring outline holds the composition together.
-    col += pal(2) * sigEdge(radius - u_radius) * 0.35;
+    col += pal(2) * inkStroke(radius - u_radius) * 0.35;
     col += sigGrain(uv);
 
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/stairwell-descent.js

@@ -14,6 +14,7 @@ export const stairwellDescent = {
     family: 'structural',
     kind: 'fragment',
     texture: 0.7,
+    consumes: ['ink'],
     traits: ['camera', 'space', 'style'],
 
     params: {
@@ -82,7 +83,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = mix(col, pal(1) * 0.3, sky * 0.5);
     col = sigAir(col, p, sat(1.0 - fade));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/storm-rift.js

@@ -13,6 +13,7 @@ export const stormRift = {
     name: 'Storm Rift',
     family: 'glitch',
     kind: 'fragment',
+    consumes: ['ink'],
     traits: ['camera', 'space', 'style'],
 
     params: {
@@ -101,7 +102,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col = max(col, prev(uv) * u_afterglow);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/suspension-span.js

@@ -13,6 +13,7 @@ export const suspensionSpan = {
     family: 'structural',
     kind: 'fragment',
     texture: 0.6,
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -78,7 +79,7 @@ vec4 scene(vec2 uv, vec2 p) {
     // Deck: one heavy line all the way across, which is what stops the cable
     // reading as a piece of string.
     col += pal(4) * smoothstep(w * 2.5, w * 0.6, abs(p.y - deckY)) * (0.4 + u_glow * 0.5);
-    col += pal(4) * sigEdge(abs(p.y - deckY) - w * 3.0) * 0.25;
+    col += pal(4) * inkStroke(abs(p.y - deckY) - w * 3.0) * 0.25;
 
     // Towers: a pair of legs and a crossbeam, with the signature form as the
     // lamp on top — the only object in the frame that is not a line.
@@ -87,17 +88,17 @@ vec4 scene(vec2 uv, vec2 p) {
     col += palRamp(0.05) * smoothstep(w * 3.0, w * 1.2, dTower) * 0.7;
 
     if (u_lamp > 0.004) {
-        float d = sigShape((vec2(x, p.y) - vec2(0.0, towerTop + u_lamp)) / u_lamp) * u_lamp;
+        float d = castMain((vec2(x, p.y) - vec2(0.0, towerTop + u_lamp)) / u_lamp) * u_lamp;
         col += pal(3) * smoothstep(0.004, -0.004, d) * (0.6 + u_glow);
         col += pal(3) * exp(-abs(d) * 20.0) * u_glow * 0.5;
-        col += pal(3) * sigEdge(d) * 0.6;
+        col += pal(3) * inkStroke(d) * 0.6;
     }
 
     // Every other bay is a little further off, so the line of the bridge has
     // some air in it rather than being a flat elevation drawing.
     col = sigAir(col, p, smoothstep(0.2, 1.4, abs(bay) * 0.7 + hash11(bayId) * 0.5));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/tide-rings.js

@@ -14,6 +14,7 @@ export const tideRings = {
     name: 'Tide Rings',
     family: 'organic',
     kind: 'fragment',
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'space', 'style'],
 
     params: {
@@ -52,7 +53,7 @@ vec4 scene(vec2 uv, vec2 p) {
         );
 
         // Distance in the signature metric: round tracks get circular wavefronts.
-        float d = sigShape(p - src) + 1.0;
+        float d = castMain(p - src) + 1.0;
         float amp = exp(-d * u_decay);
         sum += sin(d * u_wavelength - t * 6.0 + fract(s) * 6.28) * amp;
         energy += amp;
@@ -71,7 +72,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col = sigAir(col, p, smoothstep(0.0, 1.7, length(p)));
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/time-smear.js

@@ -14,6 +14,7 @@ export const timeSmear = {
     name: 'Time Smear',
     family: 'glitch',
     kind: 'fragment',
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -75,7 +76,7 @@ vec4 scene(vec2 uv, vec2 p) {
     col = mix(col, vec3(dot(col, vec3(0.299, 0.587, 0.114))), age * 0.35);
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/truchet-fold.js

@@ -13,6 +13,7 @@ export const truchetFold = {
     kind: 'fragment',
     // Takes the track's surface grain, but lightly — this is drawn, not filmed.
     texture: 0.4,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -64,11 +65,11 @@ vec4 scene(vec2 uv, vec2 p) {
     vec3 col = pal(0) * 0.05;
     col += tint * line * 0.75;
     col += tint * halo * u_glow * 0.35;
-    col += pal(4) * sigEdge(d) * u_glow * 0.25;
+    col += pal(4) * inkStroke(d) * u_glow * 0.25;
 
     col *= 0.65 + 0.35 * exp(-dot(p, p) * 0.25);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/turing-bloom.js

@@ -24,6 +24,7 @@ export const turingBloom = {
     name: 'Turing Bloom',
     family: 'organic',
     kind: 'fragment',
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -117,7 +118,7 @@ vec4 scene(vec2 uv, vec2 p) {
 
     col *= 0.75 + 0.25 * exp(-dot(p, p) * 0.2);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/voronoi-shatter.js

@@ -20,6 +20,7 @@ export const voronoiShatter = {
     family: 'geometric',
     kind: 'fragment',
     texture: 0.5,
+    consumes: ['ink'],
     traits: ['camera', 'style'],
 
     params: {
@@ -84,11 +85,11 @@ vec4 scene(vec2 uv, vec2 p) {
     // Seams: drawn in the track's hand, brightest where three plates meet.
     float seam = smoothstep(u_seam, u_seam * 0.15, border);
     col += pal(4) * seam * (0.4 + u_glow * 0.8);
-    col += pal(3) * sigEdge(border - u_seam) * 0.4;
+    col += pal(3) * inkStroke(border - u_seam) * 0.4;
 
     col *= 0.75 + 0.25 * exp(-dot(p, p) * 0.25);
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/src/scenes/shader/vortex-drift.js

@@ -13,6 +13,7 @@ export const vortexDrift = {
     name: 'Vortex Drift',
     family: 'flow',
     kind: 'fragment',
+    consumes: ['cast', 'ink'],
     traits: ['shape', 'camera', 'style'],
 
     params: {
@@ -64,14 +65,14 @@ vec4 scene(vec2 uv, vec2 p) {
 
     // The eye itself, in the signature form.
     if (u_core > 0.004) {
-        float d = sigShape(q / u_core) * u_core;
+        float d = castMain(q / u_core) * u_core;
         col = mix(col, pal(0) * 0.05, smoothstep(0.004, -0.01, d));
-        col += pal(3) * sigEdge(d) * 0.8;
+        col += pal(3) * inkStroke(d) * 0.8;
         col += pal(4) * exp(-max(d, 0.0) * 18.0) * 0.35;
     }
 
     col += sigGrain(uv);
-    return vec4(col, 1.0);
+    return vec4(inkValue(col), 1.0);
 }
 `,
 };

flow-state/tools/lint-scenes.js

@@ -103,43 +103,69 @@ const CONTRACT_UNIFORMS = new Set([
  * cast in the hexagon video and be the one shot that looks filmed elsewhere.
  * So the claim is machine-checked against the source rather than trusted.
  */
-// A stage that draws the song's CAST is expressing `shape` more completely than
+// A scene that draws the song's CAST is expressing `shape` more completely than
 // sigShape ever did — the form is the subject rather than a hint applied to one
-// — so castMain/castChorus count as evidence. Likewise inkMask/inkValue are the
+// — so castMain/castChorus count as evidence.
-// style trait carried out in full. See scenes/stage/README.md.
+//
+// The INK does not work the same way and must not be listed under `style`. A
+// trait is a property of the track that a scene may honour; an artifact is
+// content it draws. Taking the ink says nothing about whether the scene
+// responds to u_sigLine, and treating it as evidence let Eclipse Field claim a
+// trait it had stopped honouring — which the runtime gate then caught.
 // The same idea as TRAIT_EVIDENCE, for the identity artifacts: a scene that
 // declares it consumes the cast has to actually draw it. Without this,
 // `consumes` is a comment, and the migration becomes unverifiable the moment it
 // is more than a handful of files.
 const ARTIFACT_EVIDENCE = {
-    cast:    /\bcast(Main|Chorus|SDF)\s*\(/,
+    cast:    /\bcast(Main|Chorus|SDF|Form)\s*\(/,
-    ink:     /\bink(Mask|Value|Pattern)\s*\(/,
+    ink:     /\bink(Mask|Value|Pattern|Stroke)\s*\(/,
     staging: /\b(stageNode|stageScale)\s*\(/,
 };
 
 const TRAIT_EVIDENCE = {
-    shape:  /\b(sig(Shape|Form)|cast(Main|Chorus|SDF))\s*\(/,
+    shape:  /\b(sig(Shape|Form)|cast(Main|Chorus|SDF|Form))\s*\(/,
     camera: /\bsigCamera\s*\(/,
     space:  /\b(sigHorizonY|sigAir)\s*\(|\bu_sig(Horizon|Depth|Wash)\b/,
-    style:  /\b(sigEdge|sigGrain|sigFolded|inkMask|inkValue|inkPattern)\s*\(|\bu_sig(Line|Soft|Texture|Fold)\b/,
+    style:  /\b(sigEdge|sigGrain|sigFolded)\s*\(|\bu_sig(Line|Soft|Texture|Fold)\b/,
 };
 
-// The shader preamble is a JS template literal, so a backtick anywhere inside
+// Every shader in this project lives inside a JS template literal, so a
-// it silently closes the literal. Twice now that has produced a check page that
+// backtick anywhere in one silently closes it. Three times now that has cost a
-// hangs on "starting…" with an empty console, which is an expensive way to find
+// debugging round: twice in the preamble, where it produced a check page that
-// a typo. One grep is cheaper.
+// hung on "starting…" with an empty console, and once in a scene, where at
-console.log('\nshader contract');
+// least the module failed to parse loudly. A GLSL comment is the natural place
+// to reach for backticks when quoting a param name, which is exactly why this
+// keeps happening.
+//
+// Checked across the contract AND every scene, since the scene case is the one
+// a mechanical pass over sixty files will keep reintroducing.
+console.log('\nshader literals');
 {
-    const src = readFileSync(join(SRC, 'engine/shader-contract.js'), 'utf8');
+    const targets = [join(SRC, 'engine/shader-contract.js'), ...walk(join(SRC, 'scenes'))];
-    const literal = src.slice(src.indexOf('export const PREAMBLE = `') + 25);
+    let clean = 0;
-    const body = literal.slice(0, literal.indexOf('\n`;'));
+    for (const file of targets) {
-    const stray = body.split('\n').filter((l) => l.includes('`') && !l.includes('${'));
+        const src = readFileSync(file, 'utf8');
-    if (stray.length) {
+        const rel = relative(SRC, file).replace(/\\/g, '/');
-        fail(`shader preamble contains a backtick, which closes the template literal:\n` +
+        // Every template literal in the file, then the lines inside them that
-             stray.map((l) => `      ${l.trim()}`).join('\n'));
+        // carry a backtick without being an interpolation.
-    } else {
+        const stray = [];
-        ok('preamble has no stray backticks');
+        const rx = /`([\s\S]*?)`/g;
+        let m;
+        while ((m = rx.exec(src)) !== null) {
+            if (!/\bvec4 scene|precision highp|void main/.test(m[1])) continue;
+            for (const line of m[1].split('\n')) {
+                if (line.includes('`') && !line.includes('${')) stray.push(line);
             }
+        }
+        // A shader body that swallowed a closing backtick shows up as an
+        // unbalanced count across the file.
+        const ticks = (src.match(/`/g) || []).length;
+        if (stray.length || ticks % 2 !== 0) {
+            fail(`${rel}: backtick inside a shader literal — it closes the string` +
+                 (stray.length ? `:\n${stray.map((l) => `      ${l.trim()}`).join('\n')}` : ''));
+        } else clean++;
+    }
+    if (clean === targets.length) ok(`${clean} shader literals balanced, no stray backticks`);
 }
 
 console.log('\nscene schema lint');