consul-vdx-term-keyboard-co.../README.md

68 lines
1.7 KiB
Markdown
Raw Normal View History

2023-04-09 05:20:57 +00:00
# Keyboard Converter: Consul 262.5 & VDX 52600
![Terminal with keyboard and the converter](overview.jpg)
Arduino project for a keyboard converter between a Zbrojovka Consul 262.5 terminal keyboard and a Videoton VDX 52600 terminal.
## Keyboard: Consul 262.5
Terminal keyboard from 1980s.
It uses a DB25 connector with UART TTL data lines, clock line, +5V primary power and -12V auxiliary power.
## Terminal: VDX 52600
VT52 termnial with a DIN5 keyboard connector that dones not use the standard AT keyboard protocol.
## Converter
Interfaces the keyboard and the terminal, optionally a USB. These modes of operation are supported:
1. Keyboard and terminal connected: primary standalone mode. Everything is powered from the terminal.
2. Keyboard and USB connected: USB keyboard mode. Powered from the USB which acts as a HID keyboard.
3. Terminal and USB connected: Serial keyboard over USB mode. Powered independently. Allows sending keystrokes to the terminal over USB serial.
![Converter box](box.jpg)
## Parts needed
- Arduino Leonardo
- Symmetrical boost converter, 5V to +/- 12V
- Piezo speaker
- red and green LED + 470 ohm resistors
- connectors
- project box
- (among others)
## Connections
*TODO*
### Terminal DIN5
Device | Controller | Description
GND | GND | Ground
+5V | +5V | Power
Data | 6 | Keyboard data to terminal
Status | 7 | Status (LEDs) from terminal
### Keyboard DB25
Device | Controller | Description
GND | GND | Ground
+5V | +5V | Power
-12V | -12V | via a symmetrical boost converter
Serial out | 3 | UART out from keyboard
Serial in | 4 | UART in to keyboard
### Box Interface
Controller | Description
10 | Offline LED
9 | Online LED
8 | Speaker