Drive radar blips from the T-Deck Plus dual microphones
Add a SoundDetector that reads the ES7210 as a 4-slot TDM stream (slot 0 = MIC1/left, slot 2 = MIC3/right), tracks a per-channel RMS envelope with an adaptive noise floor, and publishes a stereo balance plus a dB-mapped loudness. The radar sketch now slides a single reused blip left/right from the balance and moves it nearer as the loudness rises, instead of firing a hardcoded demo blip. The device's own ping/click mutes the detector for 200 ms so it cannot hear itself. The trackball stays detached: GPIO0 is unavailable while the ES7210 microphones are running.
This commit is contained in:
@@ -0,0 +1,57 @@
|
||||
/**
|
||||
* @file sound_detector.h
|
||||
* @brief Dual-microphone sound localizer for the T-Deck Plus (ES7210).
|
||||
*
|
||||
* Reads the two populated MEMS microphones as a 4-slot TDM stream:
|
||||
* slot 0 = MIC1 (left), slot 2 = MIC3 (right)
|
||||
* and exposes a smoothed left/right level, a stereo balance and a loudness
|
||||
* value suitable for placing a radar blip.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include <Arduino.h>
|
||||
#include <driver/i2s.h>
|
||||
|
||||
struct SoundReading {
|
||||
float left; // smoothed level above the noise floor (0..1)
|
||||
float right; // smoothed level above the noise floor (0..1)
|
||||
float balance; // -1 = far left, 0 = centre, +1 = far right
|
||||
float loudness; // 0 = quiet, 1 = loud (dB-mapped)
|
||||
bool active; // true while a sound is present (with a short hold)
|
||||
};
|
||||
|
||||
class SoundDetector {
|
||||
public:
|
||||
// Starts the ES7210 codec and the I2S receive task. Returns false if the
|
||||
// codec or I2S driver could not be initialised.
|
||||
bool begin(uint32_t sampleRate = 16000);
|
||||
|
||||
// Latest measurement. Safe to call from the main loop.
|
||||
SoundReading read();
|
||||
|
||||
bool available() const { return running_; }
|
||||
|
||||
// Ignore microphone input for a while (used so the device's own radar
|
||||
// ping does not register as a target).
|
||||
void suppress(uint32_t ms);
|
||||
|
||||
private:
|
||||
static void taskEntry(void *arg);
|
||||
void taskLoop();
|
||||
void processBlock(const int16_t *frames, size_t frameCount);
|
||||
void publish(float left, float right, float balance, float loudness, bool active);
|
||||
|
||||
uint32_t sampleRate_ = 16000;
|
||||
TaskHandle_t task_ = nullptr;
|
||||
volatile bool running_ = false;
|
||||
volatile uint32_t suppressUntil_ = 0;
|
||||
|
||||
portMUX_TYPE mux_ = portMUX_INITIALIZER_UNLOCKED;
|
||||
SoundReading reading_ = {};
|
||||
uint32_t lastActiveMs_ = 0;
|
||||
|
||||
float envL_ = 0.0f;
|
||||
float envR_ = 0.0f;
|
||||
float floorL_ = 0.01f;
|
||||
float floorR_ = 0.01f;
|
||||
};
|
||||
Reference in New Issue
Block a user