Added GPSShield example

This commit is contained in:
lewisxhe
2024-03-29 12:05:36 +08:00
parent 58095146d2
commit 5429079fba
4 changed files with 104 additions and 3 deletions
+1
View File
@@ -13,6 +13,7 @@ examples
├─Keyboard_T_Deck_Master # T-Deck read from keyboard
├─Microphone # Noise detection
├─Touchpad # Read touch coordinates
├─GPSShield # GPS Shield example
└─UnitTest # Factory hardware unit testing
````
+1
View File
@@ -15,6 +15,7 @@ examples
├─Keyboard_T_Deck_Master # T-Deck read from keyboard
├─Microphone # Noise detection
├─Touchpad # Read touch coordinates
├─GPSShield # GPS Shield example
└─UnitTest # Factory hardware unit testing
````
+99
View File
@@ -0,0 +1,99 @@
/**
* @file GPSShield.ino
* @author Lewis He (lewishe@outlook.com)
* @license MIT
* @copyright Copyright (c) 2024 Shenzhen Xin Yuan Electronic Technology Co., Ltd
* @date 2024-03-29
* @note This sketch only applies to boards carrying GPS shields, the default is T-Deck
* It does not support GPS function. Of course, you can use an external GPS module to connect to the Gover interface.
*/
#ifndef SerialGPS
#define SerialGPS Serial1
#endif
#define BOARD_GPS_TX_PIN 43
#define BOARD_GPS_RX_PIN 44
#define BOARD_POWERON 10
#include <Arduino.h>
#include <TinyGPS++.h>
TinyGPSPlus gps;
void setup()
{
Serial.begin(115200);
//!⚠️ The board peripheral power control pin needs to be set to HIGH when using the peripheral
pinMode(BOARD_POWERON, OUTPUT);
digitalWrite(BOARD_POWERON, HIGH);
//GPS Serial port
SerialGPS.begin(38400, SERIAL_8N1, BOARD_GPS_RX_PIN, BOARD_GPS_TX_PIN);
Serial.println("This sketch only applies to boards carrying GPS shields, the default is T-Deck");
Serial.println("It does not support GPS function. Of course, you can use an external GPS module to connect to the Gover interface.");
delay(2000);
}
void loop()
{
while (SerialGPS.available()) {
int c = SerialGPS.read();
// Serial.write(c);
if (gps.encode(c)) {
displayInfo();
}
}
delay(1);
}
void displayInfo()
{
Serial.print(F("Location: "));
if (gps.location.isValid()) {
Serial.print(gps.location.lat(), 6);
Serial.print(F(","));
Serial.print(gps.location.lng(), 6);
} else {
Serial.print(F("INVALID"));
}
Serial.print(F(" Date/Time: "));
if (gps.date.isValid()) {
Serial.print(gps.date.month());
Serial.print(F("/"));
Serial.print(gps.date.day());
Serial.print(F("/"));
Serial.print(gps.date.year());
} else {
Serial.print(F("INVALID"));
}
Serial.print(F(" "));
if (gps.time.isValid()) {
if (gps.time.hour() < 10) Serial.print(F("0"));
Serial.print(gps.time.hour());
Serial.print(F(":"));
if (gps.time.minute() < 10) Serial.print(F("0"));
Serial.print(gps.time.minute());
Serial.print(F(":"));
if (gps.time.second() < 10) Serial.print(F("0"));
Serial.print(gps.time.second());
Serial.print(F("."));
if (gps.time.centisecond() < 10) Serial.print(F("0"));
Serial.print(gps.time.centisecond());
} else {
Serial.print(F("INVALID"));
}
Serial.println();
}
+3 -3
View File
@@ -23,6 +23,7 @@ src_dir = examples/UnitTest
; src_dir = examples/Microphone
; src_dir = examples/Touchpad
; src_dir = examples/Keyboard_T_Deck_Master
; src_dir = examples/GPSShield
; src_dir = examples/LvglArduinoVNC_VGA
@@ -44,15 +45,14 @@ build_flags =
-DBOARD_HAS_PSRAM
; Enable UARDUINO_ USB_ CDC_ ON_ BOOT will start printing and wait for terminal access during startup
; -DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_USB_CDC_ON_BOOT=1
; Enable UARDUINO_USB_CDC_ON_BOOT will turn off printing and will not block when using the battery
-UARDUINO_USB_CDC_ON_BOOT
; -UARDUINO_USB_CDC_ON_BOOT
-DDISABLE_ALL_LIBRARY_WARNINGS
extra_scripts = ./script/pos_extra_script.py
[env:T-Deck]
extends = env