Update Radiolib version to 7.1.0
This commit is contained in:
+1
-1
@@ -54,7 +54,7 @@ jobs:
|
||||
|
||||
- name: Build example
|
||||
run:
|
||||
arduino-cli compile --libraries /home/runner/work/RadioLib --fqbn arduino:avr:uno $PWD/examples/SX126x/SX126x_Transmit_Blocking/SX126x_Transmit_Blocking.ino --warnings=all
|
||||
arduino-cli compile --libraries /home/runner/work/RadioLib --fqbn arduino:avr:uno $PWD/examples/SX123x/SX123x_Transmit_Blocking/SX123x_Transmit_Blocking.ino --warnings=all
|
||||
|
||||
- name: Perform CodeQL Analysis
|
||||
uses: github/codeql-action/analyze@v3
|
||||
|
||||
+5
-11
@@ -10,12 +10,11 @@ on:
|
||||
id:
|
||||
description: The ID of the platform on which the build is run
|
||||
required: true
|
||||
default: arduino:avr:uno
|
||||
default: arduino:avr:mega
|
||||
type: choice
|
||||
options:
|
||||
- all
|
||||
- none
|
||||
- arduino:avr:uno
|
||||
- arduino:avr:mega
|
||||
- arduino:mbed:nano33ble
|
||||
- arduino:mbed:envie_m4
|
||||
@@ -27,7 +26,6 @@ on:
|
||||
- esp32:esp32:esp32
|
||||
- esp8266:esp8266:generic
|
||||
- Intel:arc32:arduino_101
|
||||
- SparkFun:apollo3:sfe_artemis
|
||||
- STMicroelectronics:stm32:GenF3:pnum=BLACKPILL_F303CC
|
||||
- STMicroelectronics:stm32:Nucleo_64:pnum=NUCLEO_WL55JC1
|
||||
- stm32duino:STM32F1:mapleMini
|
||||
@@ -45,8 +43,6 @@ jobs:
|
||||
matrix:
|
||||
# platform-dependent settings - extra board options, board index URLs, skip patterns etc.
|
||||
include:
|
||||
- id: arduino:avr:uno
|
||||
run: echo "skip-pattern=(STM32WL|SSTV|LoRaWAN|LR11x0_Firmware_Update|Pager|APRS|Morse)" >> $GITHUB_OUTPUT
|
||||
- id: arduino:avr:mega
|
||||
run: |
|
||||
echo "options=':cpu=atmega2560'" >> $GITHUB_OUTPUT
|
||||
@@ -86,11 +82,6 @@ jobs:
|
||||
echo "skip-pattern=(STM32WL|LR11x0_Firmware_Update)" >> $GITHUB_OUTPUT
|
||||
echo "options=':xtal=80,ResetMethod=ck,CrystalFreq=26,FlashFreq=40,FlashMode=qio,eesz=512K'" >> $GITHUB_OUTPUT
|
||||
echo "index-url=--additional-urls http://arduino.esp8266.com/stable/package_esp8266com_index.json" >> $GITHUB_OUTPUT
|
||||
- id: SparkFun:apollo3:sfe_artemis
|
||||
run: |
|
||||
echo "skip-pattern=(STM32WL|LoRaWAN)" >> $GITHUB_OUTPUT
|
||||
echo "warnings='none'" >> $GITHUB_OUTPUT
|
||||
echo "index-url=--additional-urls https://raw.githubusercontent.com/sparkfun/Arduino_Apollo3/master/package_sparkfun_apollo3_index.json" >> $GITHUB_OUTPUT
|
||||
- id: STMicroelectronics:stm32:GenF3:pnum=BLACKPILL_F303CC
|
||||
run: |
|
||||
echo "index-url=--additional-urls https://raw.githubusercontent.com/stm32duino/BoardManagerFiles/main/package_stmicroelectronics_index.json" >> $GITHUB_OUTPUT
|
||||
@@ -131,9 +122,12 @@ jobs:
|
||||
runs-on: ubuntu-latest
|
||||
name: ${{ matrix.id }}
|
||||
env:
|
||||
run-build: ${{ (inputs.id != 'none' && matrix.id == 'arduino:avr:uno') || contains(github.event.head_commit.message, 'CI_BUILD_ALL') || contains(github.event.head_commit.message, 'Bump version to') || contains(github.event.head_commit.message, format('{0}', matrix.id)) || inputs.id == 'all' || inputs.id == matrix.id }}
|
||||
run-build: ${{ (inputs.id != 'none' && matrix.id == 'arduino:avr:mega') || contains(github.event.head_commit.message, 'CI_BUILD_ALL') || contains(github.event.head_commit.message, 'Bump version to') || contains(github.event.head_commit.message, format('{0}', matrix.id)) || inputs.id == 'all' || inputs.id == matrix.id }}
|
||||
|
||||
steps:
|
||||
- name: Free Disk Space (Ubuntu)
|
||||
uses: jlumbroso/free-disk-space@v1.3.1
|
||||
|
||||
- name: Install arduino-cli
|
||||
if: ${{ env.run-build == 'true' }}
|
||||
run:
|
||||
|
||||
@@ -49,6 +49,7 @@ SX127x, RFM9x, SX126x, LR11x0 and SX128x
|
||||
### Supported Arduino platforms:
|
||||
* __Arduino__
|
||||
* [__AVR__](https://github.com/arduino/ArduinoCore-avr) - Arduino Uno, Mega, Leonardo, Pro Mini, Nano etc.
|
||||
* NOTE: Arduino boards based on ATmega328 (Uno, Pro Mini, Nano etc.) and smaller are NOT recommended. This is because the ATmega328 MCU is very constrained in terms of program and memory size, so the library will end up taking most of the space available.
|
||||
* [__mbed__](https://github.com/arduino/ArduinoCore-mbed) - Arduino Nano 33 BLE and Arduino Portenta H7
|
||||
* [__megaAVR__](https://github.com/arduino/ArduinoCore-megaavr) - Arduino Uno WiFi Rev.2 and Nano Every
|
||||
* [__SAM__](https://github.com/arduino/ArduinoCore-sam) - Arduino Due
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
/*
|
||||
RadioLib AFSK External Radio example
|
||||
RadioLib AFSK External Radio example
|
||||
|
||||
This example shows how to use your Arduino
|
||||
as modulator for an external analogue FM radio.
|
||||
|
||||
The example sends APRS position reports with
|
||||
audio modulated as AFSK at 1200 baud using
|
||||
Bell 202 tones. However, any other AFSK
|
||||
protocol (RTTY, SSTV, etc.) may be used as well.
|
||||
This example shows how to use your Arduino
|
||||
as modulator for an external analogue FM radio.
|
||||
|
||||
The example sends APRS position reports with
|
||||
audio modulated as AFSK at 1200 baud using
|
||||
Bell 202 tones. However, any other AFSK
|
||||
protocol (RTTY, SSTV, etc.) may be used as well.
|
||||
|
||||
DO NOT transmit in APRS bands unless
|
||||
you have a ham radio license!
|
||||
DO NOT transmit in APRS bands unless
|
||||
you have a ham radio license!
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
/*
|
||||
RadioLib AFSK Imperial March Example
|
||||
RadioLib AFSK Imperial March Example
|
||||
|
||||
This example shows how to EXECUTE ORDER 66
|
||||
This example shows how to EXECUTE ORDER 66
|
||||
|
||||
Other modules that can be used for AFSK:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for AFSK:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
|
||||
@@ -1,7 +1,7 @@
|
||||
/*
|
||||
Note definitions, melody and melody-related functions
|
||||
adapted from https://github.com/robsoncouto/arduino-songs
|
||||
by Robson Couto, 2019
|
||||
Note definitions, melody and melody-related functions
|
||||
adapted from https://github.com/robsoncouto/arduino-songs
|
||||
by Robson Couto, 2019
|
||||
*/
|
||||
|
||||
#define NOTE_B0 31
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
/*
|
||||
RadioLib AFSK Example
|
||||
RadioLib AFSK Example
|
||||
|
||||
This example shows hot to send audio FSK tones
|
||||
using SX1278's FSK modem.
|
||||
This example shows hot to send audio FSK tones
|
||||
using SX1278's FSK modem.
|
||||
|
||||
Other modules that can be used for AFSK:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for AFSK:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
/*
|
||||
RadioLib AM-modulated AFSK Example
|
||||
RadioLib AM-modulated AFSK Example
|
||||
|
||||
This example shows hot to send AM-modulated
|
||||
audio FSK tones using SX1278's OOK modem.
|
||||
This example shows hot to send AM-modulated
|
||||
audio FSK tones using SX1278's OOK modem.
|
||||
|
||||
Other modules that can be used for AFSK:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
Other modules that can be used for AFSK:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
/*
|
||||
RadioLib APRS Mic-E Example
|
||||
RadioLib APRS Mic-E Example
|
||||
|
||||
This example sends APRS position reports
|
||||
encoded in the Mic-E format using SX1278's
|
||||
FSK modem. The data is modulated as AFSK
|
||||
at 1200 baud using Bell 202 tones.
|
||||
This example sends APRS position reports
|
||||
encoded in the Mic-E format using SX1278's
|
||||
FSK modem. The data is modulated as AFSK
|
||||
at 1200 baud using Bell 202 tones.
|
||||
|
||||
DO NOT transmit in APRS bands unless
|
||||
you have a ham radio license!
|
||||
DO NOT transmit in APRS bands unless
|
||||
you have a ham radio license!
|
||||
|
||||
Other modules that can be used for APRS:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for APRS:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -35,9 +35,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
/*
|
||||
RadioLib APRS Position Example
|
||||
RadioLib APRS Position Example
|
||||
|
||||
This example sends APRS position reports
|
||||
using SX1278's FSK modem. The data is
|
||||
modulated as AFSK at 1200 baud using Bell
|
||||
202 tones.
|
||||
This example sends APRS position reports
|
||||
using SX1278's FSK modem. The data is
|
||||
modulated as AFSK at 1200 baud using Bell
|
||||
202 tones.
|
||||
|
||||
DO NOT transmit in APRS bands unless
|
||||
you have a ham radio license!
|
||||
DO NOT transmit in APRS bands unless
|
||||
you have a ham radio license!
|
||||
|
||||
Other modules that can be used for APRS:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for APRS:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -35,9 +35,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
@@ -105,32 +109,49 @@ void setup() {
|
||||
}
|
||||
|
||||
void loop() {
|
||||
Serial.print(F("[APRS] Sending position ... "));
|
||||
Serial.println(F("[APRS] Sending location reports"));
|
||||
|
||||
// send a location without message or timestamp
|
||||
char destination[] = "N0CALL";
|
||||
char latitude[] = "4911.67N";
|
||||
char longitude[] = "01635.96E";
|
||||
int state = aprs.sendPosition(destination, 0, latitude, longitude);
|
||||
if(state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("[APRS] Failed to send location, code "));
|
||||
Serial.println(state);
|
||||
}
|
||||
delay(500);
|
||||
|
||||
// send a location with message and without timestamp
|
||||
char message[] = "I'm here!";
|
||||
state |= aprs.sendPosition(destination, 0, latitude, longitude, message);
|
||||
state = aprs.sendPosition(destination, 0, latitude, longitude, message);
|
||||
if(state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("[APRS] Failed to send location and message code "));
|
||||
Serial.println(state);
|
||||
}
|
||||
delay(500);
|
||||
|
||||
// you can also set repeater callsigns and SSIDs
|
||||
// up to 8 repeaters may be used
|
||||
// sendPosition will be sent with "WIDE2-2" path
|
||||
char* repeaterCallsigns[] = { "WIDE2" };
|
||||
uint8_t repeaterSSIDs[] = { 2 };
|
||||
aprs.useRepeaters(repeaterCallsigns, repeaterSSIDs, 1);
|
||||
|
||||
// send a location with message and timestamp
|
||||
char timestamp[] = "093045z";
|
||||
state |= aprs.sendPosition(destination, 0, latitude, longitude, message, timestamp);
|
||||
delay(500);
|
||||
|
||||
if(state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
} else {
|
||||
Serial.print(F("failed, code "));
|
||||
state = aprs.sendPosition(destination, 0, latitude, longitude, message, timestamp);
|
||||
if(state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("[APRS] Failed to send location, message and timestamp code "));
|
||||
Serial.println(state);
|
||||
}
|
||||
delay(500);
|
||||
|
||||
// when repeaters are no longer needed, they can be dropped
|
||||
aprs.dropRepeaters();
|
||||
|
||||
// wait one minute before transmitting again
|
||||
Serial.println(F("[APRS] All done!"));
|
||||
delay(60000);
|
||||
}
|
||||
|
||||
|
||||
@@ -1,20 +1,20 @@
|
||||
/*
|
||||
RadioLib APRS Position over LoRa Example
|
||||
RadioLib APRS Position over LoRa Example
|
||||
|
||||
This example sends APRS position reports
|
||||
using SX1278's LoRa modem.
|
||||
This example sends APRS position reports
|
||||
using SX1278's LoRa modem.
|
||||
|
||||
Other modules that can be used for APRS:
|
||||
- SX127x/RFM9x
|
||||
- SX126x/LLCC68
|
||||
- SX128x
|
||||
- LR11x0
|
||||
Other modules that can be used for APRS:
|
||||
- SX127x/RFM9x
|
||||
- SX126x/LLCC68
|
||||
- SX128x
|
||||
- LR11x0
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -27,9 +27,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create APRS client instance using the LoRa radio
|
||||
APRSClient aprs(&radio);
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
/*
|
||||
RadioLib AX.25 Frame Example
|
||||
RadioLib AX.25 Frame Example
|
||||
|
||||
This example shows how to send various
|
||||
AX.25 frames using SX1278's FSK modem.
|
||||
This example shows how to send various
|
||||
AX.25 frames using SX1278's FSK modem.
|
||||
|
||||
Other modules that can be used for AX.25:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- LR11x0
|
||||
Other modules that can be used for AX.25:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- LR11x0
|
||||
|
||||
Using raw AX.25 frames requires some
|
||||
knowledge of the protocol, refer to
|
||||
AX25_Transmit for basic operation.
|
||||
Frames shown in this example are not
|
||||
exhaustive; all possible AX.25 frames
|
||||
should be supported.
|
||||
Using raw AX.25 frames requires some
|
||||
knowledge of the protocol, refer to
|
||||
AX25_Transmit for basic operation.
|
||||
Frames shown in this example are not
|
||||
exhaustive; all possible AX.25 frames
|
||||
should be supported.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -38,9 +38,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AX.25 client instance using the FSK module
|
||||
AX25Client ax25(&radio);
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib AX.25 Transmit Example
|
||||
RadioLib AX.25 Transmit Example
|
||||
|
||||
This example sends AX.25 messages using
|
||||
SX1278's FSK modem.
|
||||
This example sends AX.25 messages using
|
||||
SX1278's FSK modem.
|
||||
|
||||
Other modules that can be used for AX.25:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- LR11x0
|
||||
Other modules that can be used for AX.25:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- LR11x0
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -31,9 +31,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AX.25 client instance using the FSK module
|
||||
AX25Client ax25(&radio);
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
/*
|
||||
RadioLib AX.25 Transmit AFSK Example
|
||||
RadioLib AX.25 Transmit AFSK Example
|
||||
|
||||
This example sends AX.25 messages using
|
||||
SX1278's FSK modem. The data is modulated
|
||||
as AFSK at 1200 baud using Bell 202 tones.
|
||||
This example sends AX.25 messages using
|
||||
SX1278's FSK modem. The data is modulated
|
||||
as AFSK at 1200 baud using Bell 202 tones.
|
||||
|
||||
Other modules that can be used for AX.25
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for AX.25
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -32,9 +32,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
/*
|
||||
RadioLib Bell Modem Transmit Example
|
||||
RadioLib Bell Modem Transmit Example
|
||||
|
||||
This example shows how to transmit binary data
|
||||
using audio Bell 202 tones.
|
||||
This example shows how to transmit binary data
|
||||
using audio Bell 202 tones.
|
||||
|
||||
Other implemented Bell modems
|
||||
- Bell 101
|
||||
- Bell 103
|
||||
Other implemented Bell modems
|
||||
- Bell 101
|
||||
- Bell 103
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
/*
|
||||
RadioLib CC1101 Receive with Address Example
|
||||
RadioLib CC1101 Receive with Address Example
|
||||
|
||||
This example receives packets using CC1101 FSK radio
|
||||
module. Packets can have 1-byte address of the
|
||||
destination node. After setting node address, this node
|
||||
will automatically filter out any packets that do not
|
||||
contain either node address or broadcast addresses.
|
||||
This example receives packets using CC1101 FSK radio
|
||||
module. Packets can have 1-byte address of the
|
||||
destination node. After setting node address, this node
|
||||
will automatically filter out any packets that do not
|
||||
contain either node address or broadcast addresses.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -24,9 +24,13 @@
|
||||
// GDO2 pin: 3 (optional)
|
||||
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//CC1101 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -31,9 +31,13 @@
|
||||
// GDO2 pin: 3 (optional)
|
||||
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//CC1101 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+21
-17
@@ -1,22 +1,22 @@
|
||||
/*
|
||||
RadioLib CC1101 Receive with Interrupts Example
|
||||
RadioLib CC1101 Receive with Interrupts Example
|
||||
|
||||
This example listens for FSK transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered.
|
||||
This example listens for FSK transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered.
|
||||
|
||||
To successfully receive data, the following settings have to be the same
|
||||
on both transmitter and receiver:
|
||||
- carrier frequency
|
||||
- bit rate
|
||||
- frequency deviation
|
||||
- sync word
|
||||
To successfully receive data, the following settings have to be the same
|
||||
on both transmitter and receiver:
|
||||
- carrier frequency
|
||||
- bit rate
|
||||
- frequency deviation
|
||||
- sync word
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -29,9 +29,13 @@
|
||||
// GDO2 pin: 3 (optional)
|
||||
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//CC1101 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
/*
|
||||
RadioLib CC1101 Settings Example
|
||||
RadioLib CC1101 Settings Example
|
||||
|
||||
This example shows how to change all the properties of RF69 radio.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, digital IO 0, digital IO 1)
|
||||
- carrier frequency
|
||||
- bit rate
|
||||
- receiver bandwidth
|
||||
- allowed frequency deviation
|
||||
- output power during transmission
|
||||
- sync word
|
||||
This example shows how to change all the properties of RF69 radio.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, digital IO 0, digital IO 1)
|
||||
- carrier frequency
|
||||
- bit rate
|
||||
- receiver bandwidth
|
||||
- allowed frequency deviation
|
||||
- output power during transmission
|
||||
- sync word
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -35,9 +35,13 @@ CC1101 radio1 = new Module(10, 2, RADIOLIB_NC, 3);
|
||||
// GDO2 pin: 5 (optional)
|
||||
CC1101 radio2 = new Module(9, 4, RADIOLIB_NC, 5);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//CC1101 radio3 = RadioShield.ModuleB;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio3 = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
/*
|
||||
RadioLib CC1101 Transmit to Address Example
|
||||
RadioLib CC1101 Transmit to Address Example
|
||||
|
||||
This example transmits packets using CC1101 FSK radio
|
||||
module. Packets can have 1-byte address of the
|
||||
destination node. After setting node address, this node
|
||||
will automatically filter out any packets that do not
|
||||
contain either node address or broadcast addresses.
|
||||
This example transmits packets using CC1101 FSK radio
|
||||
module. Packets can have 1-byte address of the
|
||||
destination node. After setting node address, this node
|
||||
will automatically filter out any packets that do not
|
||||
contain either node address or broadcast addresses.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -24,9 +24,13 @@
|
||||
// GDO2 pin: 3 (optional)
|
||||
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//CC1101 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -28,9 +28,13 @@
|
||||
// GDO2 pin: 3
|
||||
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//CC1101 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+18
-14
@@ -1,18 +1,18 @@
|
||||
/*
|
||||
RadioLib CC1101 Transmit with Interrupts Example
|
||||
RadioLib CC1101 Transmit with Interrupts Example
|
||||
|
||||
This example transmits packets using CC1101 FSK radio module.
|
||||
Once a packet is transmitted, an interrupt is triggered.
|
||||
Each packet contains up to 64 bytes of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
This example transmits packets using CC1101 FSK radio module.
|
||||
Once a packet is transmitted, an interrupt is triggered.
|
||||
Each packet contains up to 64 bytes of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#cc1101
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -25,9 +25,13 @@
|
||||
// GDO2 pin: 3
|
||||
CC1101 radio = new Module(10, 2, RADIOLIB_NC, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//CC1101 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// save transmission state between loops
|
||||
int transmissionState = RADIOLIB_ERR_NONE;
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
/*
|
||||
RadioLib FSK4 Transmit Example
|
||||
RadioLib FSK4 Transmit Example
|
||||
|
||||
This example sends an example FSK-4 'Horus Binary' message
|
||||
using SX1278's FSK modem.
|
||||
This example sends an example FSK-4 'Horus Binary' message
|
||||
using SX1278's FSK modem.
|
||||
|
||||
This signal can be demodulated using a SSB demodulator (SDR or otherwise),
|
||||
and horusdemodlib: https://github.com/projecthorus/horusdemodlib/wiki
|
||||
This signal can be demodulated using a SSB demodulator (SDR or otherwise),
|
||||
and horusdemodlib: https://github.com/projecthorus/horusdemodlib/wiki
|
||||
|
||||
Other modules that can be used for FSK4:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
Other modules that can be used for FSK4:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -34,9 +34,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create FSK4 client instance using the FSK module
|
||||
FSK4Client fsk4(&radio);
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
/*
|
||||
RadioLib FSK4 Transmit AFSK Example
|
||||
RadioLib FSK4 Transmit AFSK Example
|
||||
|
||||
This example sends an example FSK-4 'Horus Binary' message
|
||||
using SX1278's FSK modem. The data is modulated as AFSK.
|
||||
This example sends an example FSK-4 'Horus Binary' message
|
||||
using SX1278's FSK modem. The data is modulated as AFSK.
|
||||
|
||||
This signal can be demodulated using an FM demodulator (SDR or otherwise),
|
||||
and horusdemodlib: https://github.com/projecthorus/horusdemodlib/wiki
|
||||
This signal can be demodulated using an FM demodulator (SDR or otherwise),
|
||||
and horusdemodlib: https://github.com/projecthorus/horusdemodlib/wiki
|
||||
|
||||
Other modules that can be used for FSK4:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for FSK4:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -32,9 +32,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
|
||||
+24
-20
@@ -1,25 +1,25 @@
|
||||
/*
|
||||
RadioLib Hellschreiber Transmit Example
|
||||
RadioLib Hellschreiber Transmit Example
|
||||
|
||||
This example sends Hellschreiber message using
|
||||
SX1278's FSK modem.
|
||||
This example sends Hellschreiber message using
|
||||
SX1278's FSK modem.
|
||||
|
||||
Other modules that can be used for Hellschreiber:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
- LR11x0
|
||||
Other modules that can be used for Hellschreiber:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
- LR11x0
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -32,9 +32,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create Hellschreiber client instance using the FSK module
|
||||
HellClient hell(&radio);
|
||||
|
||||
+23
-19
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib Hellschreiber Transmit AFSK Example
|
||||
RadioLib Hellschreiber Transmit AFSK Example
|
||||
|
||||
This example sends Hellschreiber message using
|
||||
SX1278's FSK modem. The data is modulated
|
||||
as AFSK.
|
||||
This example sends Hellschreiber message using
|
||||
SX1278's FSK modem. The data is modulated
|
||||
as AFSK.
|
||||
|
||||
Other modules that can be used for Hellschreiber
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for Hellschreiber
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -31,9 +31,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
|
||||
+11
-4
@@ -34,6 +34,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -57,10 +65,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -71,6 +75,9 @@ void setup() {
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
+11
-4
@@ -29,6 +29,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -52,10 +60,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -67,6 +71,9 @@ void setup() {
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// set the function that will be called
|
||||
// when LoRa packet or timeout is detected
|
||||
radio.setIrqAction(setFlag);
|
||||
|
||||
@@ -48,9 +48,13 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//LR1110 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -26,9 +26,13 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//LR1110 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+182
@@ -0,0 +1,182 @@
|
||||
/*
|
||||
RadioLib LR11x0 GNSS Almanac Update Example
|
||||
|
||||
This example updates the LR11x0 GNSS almanac.
|
||||
Almanac is a database of orbital predictions of
|
||||
GNSS satellites, which allows the module to predict
|
||||
when different satellites will appear in the sky,
|
||||
and frequency of their signal.
|
||||
|
||||
Up-to-date almanac is necessary for operation!
|
||||
After an update, data will remain valid for 30 days.
|
||||
All GNSS examples require at least limited
|
||||
visibility of the sky!
|
||||
|
||||
NOTE: This example will only work for LR11x0 devices
|
||||
with sufficiently recent firmware!
|
||||
LR1110: 4.1
|
||||
LR1120: 2.1
|
||||
If your device firmware reports older firmware,
|
||||
update it using the LR11x0_Firmware_Update example.
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
#include <RadioLib.h>
|
||||
|
||||
// LR1110 has the following connections:
|
||||
// NSS pin: 10
|
||||
// DIO1 pin: 2
|
||||
// NRST pin: 3
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
static const uint32_t rfswitch_dio_pins[] = {
|
||||
RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6,
|
||||
RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC
|
||||
};
|
||||
|
||||
static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
// mode DIO5 DIO6
|
||||
{ LR11x0::MODE_STBY, { LOW, LOW } },
|
||||
{ LR11x0::MODE_RX, { HIGH, LOW } },
|
||||
{ LR11x0::MODE_TX, { HIGH, HIGH } },
|
||||
{ LR11x0::MODE_TX_HP, { LOW, HIGH } },
|
||||
{ LR11x0::MODE_TX_HF, { LOW, LOW } },
|
||||
{ LR11x0::MODE_GNSS, { LOW, LOW } },
|
||||
{ LR11x0::MODE_WIFI, { LOW, LOW } },
|
||||
END_OF_MODE_TABLE,
|
||||
};
|
||||
|
||||
// structure to save information about the GNSS almanac
|
||||
LR11x0GnssAlmanacStatus_t almStatus;
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.beginGNSS(RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS);
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
} else {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// check the firmware version
|
||||
Serial.print(F("[LR1110] Checking firmware version ... "));
|
||||
state = radio.isGnssScanCapable();
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("check passed!"));
|
||||
} else {
|
||||
Serial.println(F("check failed, firmware update needed."));
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// run GNSS scans until we get at least the time
|
||||
// NOTE: Depending on visibility of satellites,
|
||||
// this may take multiple attempts!
|
||||
while(true) {
|
||||
// run GNSS scan
|
||||
Serial.print(F("[LR1110] Running GNSS scan ... "));
|
||||
state = radio.gnssScan(NULL);
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
} else {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// check almanac status
|
||||
Serial.print(F("[LR1110] Checking GNSS almanac ... "));
|
||||
state = radio.getGnssAlmanacStatus(&almStatus);
|
||||
if (state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// we have the status, check if we have demodulated time
|
||||
if(almStatus.gps.status < RADIOLIB_LR11X0_GNSS_ALMANAC_STATUS_UP_TO_DATE) {
|
||||
Serial.println(F("time unknown, another scan needed."));
|
||||
|
||||
} else if(almStatus.gps.numUpdateNeeded > 0) {
|
||||
Serial.print(almStatus.gps.numUpdateNeeded);
|
||||
Serial.println(F(" satellites out-of-date."));
|
||||
break;
|
||||
|
||||
} else {
|
||||
Serial.println(F("no update needed!"));
|
||||
while (true) { delay(10); }
|
||||
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// wait until almanac data is available in the signal
|
||||
// multiple attempts are needed for this
|
||||
Serial.print(F("[LR1110] Waiting for subframe ... "));
|
||||
int state = radio.gnssDelayUntilSubframe(&almStatus, RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS);
|
||||
if(state == RADIOLIB_ERR_GNSS_SUBFRAME_NOT_AVAILABLE) {
|
||||
Serial.println(F("not enough time left."));
|
||||
|
||||
// wait until the next update window
|
||||
delay(2000);
|
||||
|
||||
} else {
|
||||
Serial.println(F("done!"));
|
||||
|
||||
// we have enough time to start the update
|
||||
Serial.print(F("[LR1110] Starting update ... "));
|
||||
state = radio.updateGnssAlmanac(RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS);
|
||||
if(state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
} else {
|
||||
Serial.println(F("done!"));
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
// check whether another update is needed
|
||||
Serial.print(F("[LR1110] Checking GNSS almanac ... "));
|
||||
state = radio.getGnssAlmanacStatus(&almStatus);
|
||||
if(state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// check if we have completed the update
|
||||
if(almStatus.gps.numUpdateNeeded == 0) {
|
||||
Serial.println(F("all satellites up-to-date!"));
|
||||
while (true) { delay(10); }
|
||||
} else {
|
||||
Serial.print(almStatus.gps.numUpdateNeeded);
|
||||
Serial.println(F(" satellites out-of-date."));
|
||||
}
|
||||
|
||||
// wait a bit before the next update attempt
|
||||
delay(1000);
|
||||
|
||||
}
|
||||
+134
@@ -0,0 +1,134 @@
|
||||
/*
|
||||
RadioLib LR11x0 GNSS Autonomous Position Example
|
||||
|
||||
This example performs GNSS scans and calculates
|
||||
position of the device using autonomous mode.
|
||||
In this mode, scan data does not need to be uploaded
|
||||
to LoRaCloud, however, it requires up-to-date almanac
|
||||
data. Run the LR11x0_Almanac_Update example to update
|
||||
the device almanac.
|
||||
|
||||
NOTE: This example will only work for LR11x0 devices
|
||||
with sufficiently recent firmware!
|
||||
LR1110: 4.1
|
||||
LR1120: 2.1
|
||||
If your device firmware reports older firmware,
|
||||
update it using the LR11x0_Firmware_Update example.
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
#include <RadioLib.h>
|
||||
|
||||
// LR1110 has the following connections:
|
||||
// NSS pin: 10
|
||||
// DIO1 pin: 2
|
||||
// NRST pin: 3
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
static const uint32_t rfswitch_dio_pins[] = {
|
||||
RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6,
|
||||
RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC
|
||||
};
|
||||
|
||||
static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
// mode DIO5 DIO6
|
||||
{ LR11x0::MODE_STBY, { LOW, LOW } },
|
||||
{ LR11x0::MODE_RX, { HIGH, LOW } },
|
||||
{ LR11x0::MODE_TX, { HIGH, HIGH } },
|
||||
{ LR11x0::MODE_TX_HP, { LOW, HIGH } },
|
||||
{ LR11x0::MODE_TX_HF, { LOW, LOW } },
|
||||
{ LR11x0::MODE_GNSS, { LOW, LOW } },
|
||||
{ LR11x0::MODE_WIFI, { LOW, LOW } },
|
||||
END_OF_MODE_TABLE,
|
||||
};
|
||||
|
||||
// structure to save information about the GNSS scan result
|
||||
LR11x0GnssResult_t gnssResult;
|
||||
|
||||
// structure to save information about the calculated GNSS position
|
||||
LR11x0GnssPosition_t gnssPosition;
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.beginGNSS(RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS);
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
} else {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// check the firmware version
|
||||
Serial.print(F("[LR1110] Checking firmware version ... "));
|
||||
state = radio.isGnssScanCapable();
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("check passed!"));
|
||||
} else {
|
||||
Serial.println(F("check failed, firmware update needed."));
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
Serial.println(F("Scan result\t| Latitude\t| Longitude\t| Accuracy\t| Number of satellites"));
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// run GNSS scan
|
||||
int state = radio.gnssScan(&gnssResult);
|
||||
if(state == RADIOLIB_ERR_NONE) {
|
||||
// success!
|
||||
Serial.print(gnssResult.demodStat); Serial.print("\t\t| ");
|
||||
|
||||
// get the actual data
|
||||
state = radio.getGnssPosition(&gnssPosition);
|
||||
if(state == RADIOLIB_ERR_NONE) {
|
||||
// print the position
|
||||
Serial.print(gnssPosition.latitude, 6);
|
||||
Serial.print("\t| ");
|
||||
Serial.print(gnssPosition.longitude, 6);
|
||||
Serial.print("\t| ");
|
||||
Serial.print(gnssPosition.accuracy);
|
||||
Serial.print("\t\t| ");
|
||||
Serial.println(gnssPosition.numSatsUsed);
|
||||
|
||||
} else {
|
||||
Serial.print(F("Failed to read result, code "));
|
||||
Serial.print(state);
|
||||
Serial.print(F(" (solver error "));
|
||||
Serial.print(RADIOLIB_GET_GNSS_SOLVER_ERROR(state));
|
||||
Serial.println(F(")"));
|
||||
}
|
||||
|
||||
} else {
|
||||
Serial.print(F("Scan failed, code "));
|
||||
Serial.print(state);
|
||||
Serial.print(F(" (demodulator error "));
|
||||
Serial.print(RADIOLIB_GET_GNSS_DEMOD_ERROR(state));
|
||||
Serial.println(F(")"));
|
||||
|
||||
}
|
||||
|
||||
// wait a bit before the next scan
|
||||
delay(1000);
|
||||
}
|
||||
@@ -0,0 +1,133 @@
|
||||
/*
|
||||
RadioLib LR11x0 GNSS Satellites Example
|
||||
|
||||
This example performs GNSS scans and shows the satellites
|
||||
currently in view. It is mostly useful to verify
|
||||
visibility and antenna setup.
|
||||
|
||||
NOTE: This example will only work for LR11x0 devices
|
||||
with sufficiently recent firmware!
|
||||
LR1110: 4.1
|
||||
LR1120: 2.1
|
||||
If your device firmware reports older firmware,
|
||||
update it using the LR11x0_Firmware_Update example.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#lr11x0---wifi-scan
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
#include <RadioLib.h>
|
||||
|
||||
// LR1110 has the following connections:
|
||||
// NSS pin: 10
|
||||
// DIO1 pin: 2
|
||||
// NRST pin: 3
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
static const uint32_t rfswitch_dio_pins[] = {
|
||||
RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6,
|
||||
RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC
|
||||
};
|
||||
|
||||
static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
// mode DIO5 DIO6
|
||||
{ LR11x0::MODE_STBY, { LOW, LOW } },
|
||||
{ LR11x0::MODE_RX, { HIGH, LOW } },
|
||||
{ LR11x0::MODE_TX, { HIGH, HIGH } },
|
||||
{ LR11x0::MODE_TX_HP, { LOW, HIGH } },
|
||||
{ LR11x0::MODE_TX_HF, { LOW, LOW } },
|
||||
{ LR11x0::MODE_GNSS, { LOW, LOW } },
|
||||
{ LR11x0::MODE_WIFI, { LOW, LOW } },
|
||||
END_OF_MODE_TABLE,
|
||||
};
|
||||
|
||||
// structure to save information about the GNSS scan result
|
||||
LR11x0GnssResult_t gnssResult;
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.beginGNSS(RADIOLIB_LR11X0_GNSS_CONSTELLATION_GPS);
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
} else {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// check the firmware version
|
||||
Serial.print(F("[LR1110] Checking firmware version ... "));
|
||||
state = radio.isGnssScanCapable();
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("check passed!"));
|
||||
} else {
|
||||
Serial.println(F("check failed, firmware update needed."));
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
}
|
||||
|
||||
void loop() {
|
||||
Serial.print(F("[LR1110] Running GNSS scan ... "));
|
||||
int state = radio.gnssScan(&gnssResult);
|
||||
if(state != RADIOLIB_ERR_NONE) {
|
||||
// some error occurred
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.print(state);
|
||||
Serial.print(F(" (demodulator error "));
|
||||
Serial.print(RADIOLIB_GET_GNSS_DEMOD_ERROR(state));
|
||||
Serial.println(F(")"));
|
||||
|
||||
} else {
|
||||
Serial.println(F("success!"));
|
||||
|
||||
// print the table header
|
||||
Serial.print(F("[LR1110] Detected "));
|
||||
Serial.print(gnssResult.numSatsDet);
|
||||
Serial.println(F(" satellite(s):"));
|
||||
Serial.println(F(" # | ID | C/N0 [dB]\t| Doppler [Hz]"));
|
||||
|
||||
// read all results at once
|
||||
LR11x0GnssSatellite_t satellites[32];
|
||||
state = radio.getGnssSatellites(satellites, gnssResult.numSatsDet);
|
||||
if(state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("Failed to read results, code "));
|
||||
Serial.println(state);
|
||||
} else {
|
||||
// print all the results
|
||||
for(int i = 0; i < gnssResult.numSatsDet; i++) {
|
||||
if(i < 10) { Serial.print(" "); } Serial.print(i); Serial.print(" | ");
|
||||
Serial.print(satellites[i].svId); Serial.print(" | ");
|
||||
Serial.print(satellites[i].c_n0); Serial.print("\t\t| ");
|
||||
Serial.println(satellites[i].doppler);
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
// wait for a second before scanning again
|
||||
delay(1000);
|
||||
}
|
||||
@@ -2,6 +2,7 @@
|
||||
RadioLib LR11x0 LR-FHSS Modem Example
|
||||
|
||||
This example shows how to use LR-FHSS modem in LR11x0 chips.
|
||||
This modem can only transmit data, and is not able to receive.
|
||||
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
LR-FHSS modem, so this code should not be run directly!
|
||||
@@ -26,9 +27,13 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//LR1110 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
@@ -68,9 +73,7 @@ void setup() {
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// LR-FHSS modem can use the same transmit/receive methods
|
||||
// as the LoRa modem, even their interrupt-driven versions
|
||||
|
||||
// LR-FHSS modem can only transmit!
|
||||
// transmit LR-FHSS packet
|
||||
int state = radio.transmit("Hello World!");
|
||||
/*
|
||||
@@ -89,22 +92,4 @@ void loop() {
|
||||
Serial.println(state);
|
||||
}
|
||||
|
||||
// receive LR-FHSS packet
|
||||
String str;
|
||||
state = radio.receive(str);
|
||||
/*
|
||||
byte byteArr[8];
|
||||
int state = radio.receive(byteArr, 8);
|
||||
*/
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("[LR1110] Received packet!"));
|
||||
Serial.print(F("[LR1110] Data:\t"));
|
||||
Serial.println(str);
|
||||
} else if (state == RADIOLIB_ERR_RX_TIMEOUT) {
|
||||
Serial.println(F("[LR1110] Timed out while waiting for packet!"));
|
||||
} else {
|
||||
Serial.print(F("[LR1110] Failed to receive packet, code "));
|
||||
Serial.println(state);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
@@ -22,6 +22,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -66,10 +74,6 @@ void setFlag(void) {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -81,6 +85,9 @@ void setup() {
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// set the function that will be called
|
||||
// when new packet is received
|
||||
radio.setIrqAction(setFlag);
|
||||
|
||||
@@ -39,6 +39,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -62,10 +70,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -76,6 +80,9 @@ void setup() {
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
@@ -35,6 +35,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -58,10 +66,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -73,6 +77,9 @@ void setup() {
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// set the function that will be called
|
||||
// when new packet is received
|
||||
radio.setPacketReceivedAction(setFlag);
|
||||
|
||||
@@ -30,6 +30,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -53,10 +61,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -68,6 +72,9 @@ void setup() {
|
||||
delay(1000);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
}
|
||||
|
||||
// counter to keep track of transmitted packets
|
||||
|
||||
+11
-4
@@ -31,6 +31,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -57,10 +65,6 @@ int transmissionState = RADIOLIB_ERR_NONE;
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -72,6 +76,9 @@ void setup() {
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// set the function that will be called
|
||||
// when packet transmission is finished
|
||||
radio.setPacketSentAction(setFlag);
|
||||
|
||||
+11
-4
@@ -32,6 +32,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -55,10 +63,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -69,6 +73,9 @@ void setup() {
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
+11
-4
@@ -32,6 +32,14 @@
|
||||
// BUSY pin: 9
|
||||
LR1110 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// set RF switch configuration for Wio WM1110
|
||||
// Wio WM1110 uses DIO5 and DIO6 for RF switching
|
||||
// NOTE: other boards may be different!
|
||||
@@ -55,10 +63,6 @@ static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// set RF switch control configuration
|
||||
// this has to be done prior to calling begin()
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// initialize LR1110 with default settings
|
||||
Serial.print(F("[LR1110] Initializing ... "));
|
||||
int state = radio.begin();
|
||||
@@ -70,6 +74,9 @@ void setup() {
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// set RF switch control configuration
|
||||
radio.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table);
|
||||
|
||||
// set the function that will be called
|
||||
// when WiFi scan is complete
|
||||
radio.setIrqAction(setFlag);
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
/*
|
||||
RadioLib SX127x Morse Receive AM Example
|
||||
RadioLib SX127x Morse Receive AM Example
|
||||
|
||||
This example receives Morse code message using
|
||||
SX1278's FSK modem. The signal is expected to be
|
||||
modulated as OOK, to be demodulated in AM mode.
|
||||
This example receives Morse code message using
|
||||
SX1278's FSK modem. The signal is expected to be
|
||||
modulated as OOK, to be demodulated in AM mode.
|
||||
|
||||
Other modules that can be used for Morse Code
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
Other modules that can be used for Morse Code
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -30,9 +30,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// pin 5 is connected to SX1278 DIO2
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
/*
|
||||
RadioLib Morse Transmit AM Example
|
||||
RadioLib Morse Transmit AM Example
|
||||
|
||||
This example sends Morse code message using
|
||||
SX1278's FSK modem. The signal is modulated
|
||||
as OOK, and may be demodulated in AM mode.
|
||||
This example sends Morse code message using
|
||||
SX1278's FSK modem. The signal is modulated
|
||||
as OOK, and may be demodulated in AM mode.
|
||||
|
||||
Other modules that can be used for Morse Code
|
||||
with AM modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
Other modules that can be used for Morse Code
|
||||
with AM modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -30,9 +30,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// pin 5 is connected to SX1278 DIO2
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib Morse Transmit AFSK Example
|
||||
RadioLib Morse Transmit AFSK Example
|
||||
|
||||
This example sends Morse code message using
|
||||
SX1278's FSK modem. The signal is modulated
|
||||
as AFSK, and may be demodulated in FM mode.
|
||||
This example sends Morse code message using
|
||||
SX1278's FSK modem. The signal is modulated
|
||||
as AFSK, and may be demodulated in FM mode.
|
||||
|
||||
Other modules that can be used for Morse Code
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for Morse Code
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -31,9 +31,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
|
||||
@@ -1,26 +1,26 @@
|
||||
/*
|
||||
RadioLib Morse Transmit SSB Example
|
||||
RadioLib Morse Transmit SSB Example
|
||||
|
||||
This example sends Morse code message using
|
||||
SX1278's FSK modem. The signal is an unmodulated
|
||||
carrier wave, and may be demodulated in SSB mode.
|
||||
This example sends Morse code message using
|
||||
SX1278's FSK modem. The signal is an unmodulated
|
||||
carrier wave, and may be demodulated in SSB mode.
|
||||
|
||||
Other modules that can be used for Morse Code:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
- LR11x0
|
||||
Other modules that can be used for Morse Code:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
- LR11x0
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -33,9 +33,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create Morse client instance using the FSK module
|
||||
MorseClient morse(&radio);
|
||||
|
||||
@@ -17,7 +17,7 @@
|
||||
#include <RadioLib.h>
|
||||
|
||||
// include the hardware abstraction layer
|
||||
#include "EspHal.h"
|
||||
#include "hal/ESP-IDF/EspHal.h"
|
||||
|
||||
// create a new instance of the HAL class
|
||||
EspHal* hal = new EspHal(5, 19, 27);
|
||||
|
||||
@@ -23,11 +23,11 @@ add_executable(${PROJECT_NAME}
|
||||
)
|
||||
|
||||
# Pull in common dependencies
|
||||
target_link_libraries(${PROJECT_NAME} pico_stdlib hardware_spi hardware_gpio hardware_timer RadioLib)
|
||||
target_link_libraries(${PROJECT_NAME} pico_stdlib hardware_spi hardware_gpio hardware_timer pico_multicore hardware_pwm RadioLib)
|
||||
|
||||
|
||||
pico_enable_stdio_usb(${PROJECT_NAME} 1)
|
||||
pico_enable_stdio_uart(${PROJECT_NAME} 0)
|
||||
|
||||
# Create map/bin/hex file etc.
|
||||
pico_add_extra_outputs(${PROJECT_NAME})
|
||||
pico_add_extra_outputs(${PROJECT_NAME})
|
||||
|
||||
@@ -41,7 +41,7 @@
|
||||
#include <RadioLib.h>
|
||||
|
||||
// include the hardware abstraction layer
|
||||
#include "PicoHal.h"
|
||||
#include "hal/RPiPico/PicoHal.h"
|
||||
|
||||
// create a new instance of the HAL class
|
||||
PicoHal* hal = new PicoHal(SPI_PORT, SPI_MISO, SPI_MOSI, SPI_SCK);
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
#include <RadioLib.h>
|
||||
|
||||
// include the hardware abstraction layer
|
||||
#include "PiHal.h"
|
||||
#include "hal/RPi/PiHal.h"
|
||||
|
||||
// create a new instance of the HAL class
|
||||
// use SPI channel 1, because on Waveshare LoRaWAN Hat,
|
||||
|
||||
@@ -28,7 +28,7 @@
|
||||
#include <RadioLib.h>
|
||||
|
||||
// include the hardware abstraction layer
|
||||
#include "libtockHal.h"
|
||||
#include "hal/Tock/libtockHal.h"
|
||||
|
||||
// the entry point for the program
|
||||
int main(void) {
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib Pager (POCSAG) Receive Example
|
||||
RadioLib Pager (POCSAG) Receive Example
|
||||
|
||||
This example shows how to receive FSK packets without using
|
||||
SX127x packet engine.
|
||||
This example shows how to receive FSK packets without using
|
||||
SX127x packet engine.
|
||||
|
||||
This example receives POCSAG messages using SX1278's
|
||||
FSK modem in direct mode.
|
||||
This example receives POCSAG messages using SX1278's
|
||||
FSK modem in direct mode.
|
||||
|
||||
Other modules that can be used to receive POCSAG:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
Other modules that can be used to receive POCSAG:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -45,9 +45,13 @@ const int pin = 5;
|
||||
// create Pager client instance using the FSK module
|
||||
PagerClient pager(&radio);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib Pager (POCSAG) Transmit Example
|
||||
RadioLib Pager (POCSAG) Transmit Example
|
||||
|
||||
This example sends POCSAG messages using SX1278's
|
||||
FSK modem.
|
||||
This example sends POCSAG messages using SX1278's
|
||||
FSK modem.
|
||||
|
||||
Other modules that can be used to send POCSAG:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
Other modules that can be used to send POCSAG:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -31,9 +31,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create Pager client instance using the FSK module
|
||||
PagerClient pager(&radio);
|
||||
|
||||
+14
-6
@@ -1,12 +1,12 @@
|
||||
/*
|
||||
RadioLib PhysicalLayer Interface Example
|
||||
RadioLib PhysicalLayer Interface Example
|
||||
|
||||
This example shows how to use the common PhysicalLayer
|
||||
to interface with different radio modules using the same
|
||||
methods.
|
||||
This example shows how to use the common PhysicalLayer
|
||||
to interface with different radio modules using the same
|
||||
methods.
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -23,6 +23,14 @@
|
||||
// extra GPIO/interrupt pin: 3 (unused on some modules)
|
||||
RADIO_TYPE radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// get pointer to the common layer
|
||||
PhysicalLayer* phy = (PhysicalLayer*)&radio;
|
||||
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
/*
|
||||
RadioLib RF69 Receive with AES Example
|
||||
RadioLib RF69 Receive with AES Example
|
||||
|
||||
This example receives packets using RF69 FSK radio module.
|
||||
Packets are decrypted using hardware AES.
|
||||
NOTE: When using address filtering, the address byte is NOT encrypted!
|
||||
This example receives packets using RF69 FSK radio module.
|
||||
Packets are decrypted using hardware AES.
|
||||
NOTE: When using address filtering, the address byte is NOT encrypted!
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -21,9 +21,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
/*
|
||||
RadioLib RF69 Receive with Address Example
|
||||
RadioLib RF69 Receive with Address Example
|
||||
|
||||
This example receives packets using RF69 FSK radio module.
|
||||
Packets can have 1-byte address of the destination node.
|
||||
After setting node (or broadcast) address, this node will
|
||||
automatically filter out any packets that do not contain
|
||||
either node address or broadcast address.
|
||||
This example receives packets using RF69 FSK radio module.
|
||||
Packets can have 1-byte address of the destination node.
|
||||
After setting node (or broadcast) address, this node will
|
||||
automatically filter out any packets that do not contain
|
||||
either node address or broadcast address.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -23,9 +23,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -30,9 +30,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
/*
|
||||
RadioLib RF69 Receive with Interrupts Example
|
||||
RadioLib RF69 Receive with Interrupts Example
|
||||
|
||||
This example listens for FSK transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered.
|
||||
This example listens for FSK transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -21,9 +21,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
/*
|
||||
RadioLib RF69 Settings Example
|
||||
RadioLib RF69 Settings Example
|
||||
|
||||
This example shows how to change all the properties of RF69 radio.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, digital IO 0, digital IO 1)
|
||||
- carrier frequency
|
||||
- bit rate
|
||||
- receiver bandwidth
|
||||
- allowed frequency deviation
|
||||
- output power during transmission
|
||||
- sync word
|
||||
This example shows how to change all the properties of RF69 radio.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, digital IO 0, digital IO 1)
|
||||
- carrier frequency
|
||||
- bit rate
|
||||
- receiver bandwidth
|
||||
- allowed frequency deviation
|
||||
- output power during transmission
|
||||
- sync word
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -33,9 +33,13 @@ RF69 radio1 = new Module(10, 2, 3);
|
||||
// RESET pin: 5
|
||||
RF69 radio2 = new Module(9, 4, 5);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio3 = RadioShield.ModuleB;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio3 = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,15 +1,15 @@
|
||||
/*
|
||||
RadioLib RF69 Transmit with AES Example
|
||||
RadioLib RF69 Transmit with AES Example
|
||||
|
||||
This example transmits packets using RF69 FSK radio module.
|
||||
Packets are encrypted using hardware AES.
|
||||
NOTE: When using address filtering, the address byte is NOT encrypted!
|
||||
This example transmits packets using RF69 FSK radio module.
|
||||
Packets are encrypted using hardware AES.
|
||||
NOTE: When using address filtering, the address byte is NOT encrypted!
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -21,9 +21,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,17 +1,17 @@
|
||||
/*
|
||||
RadioLib RF69 Transmit to Address Example
|
||||
RadioLib RF69 Transmit to Address Example
|
||||
|
||||
This example transmits packets using RF69 FSK radio module.
|
||||
Packets can have 1-byte address of the destination node.
|
||||
After setting node (or broadcast) address, this node will
|
||||
automatically filter out any packets that do not contain
|
||||
either node address or broadcast address.
|
||||
This example transmits packets using RF69 FSK radio module.
|
||||
Packets can have 1-byte address of the destination node.
|
||||
After setting node (or broadcast) address, this node will
|
||||
automatically filter out any packets that do not contain
|
||||
either node address or broadcast address.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -23,9 +23,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -27,9 +27,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,18 +1,18 @@
|
||||
/*
|
||||
RadioLib RF69 Transmit with Interrupts Example
|
||||
RadioLib RF69 Transmit with Interrupts Example
|
||||
|
||||
This example transmits FSK packets with one second delays
|
||||
between them. Each packet contains up to 64 bytes
|
||||
of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
This example transmits FSK packets with one second delays
|
||||
between them. Each packet contains up to 64 bytes
|
||||
of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#rf69sx1231
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -24,9 +24,13 @@
|
||||
// RESET pin: 3
|
||||
RF69 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//RF69 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// save transmission state between loops
|
||||
int transmissionState = RADIOLIB_ERR_NONE;
|
||||
|
||||
@@ -1,25 +1,25 @@
|
||||
/*
|
||||
RadioLib RTTY Transmit Example
|
||||
RadioLib RTTY Transmit Example
|
||||
|
||||
This example sends RTTY message using SX1278's
|
||||
FSK modem.
|
||||
This example sends RTTY message using SX1278's
|
||||
FSK modem.
|
||||
|
||||
Other modules that can be used for RTTY:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
- LR11x0
|
||||
Other modules that can be used for RTTY:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- SX126x
|
||||
- nRF24
|
||||
- Si443x/RFM2x
|
||||
- SX128x
|
||||
- LR11x0
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -32,9 +32,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create RTTY client instance using the FSK module
|
||||
RTTYClient rtty(&radio);
|
||||
|
||||
@@ -1,22 +1,22 @@
|
||||
/*
|
||||
RadioLib RTTY Transmit AFSK Example
|
||||
RadioLib RTTY Transmit AFSK Example
|
||||
|
||||
This example sends RTTY message using SX1278's
|
||||
FSK modem. The data is modulated as AFSK.
|
||||
This example sends RTTY message using SX1278's
|
||||
FSK modem. The data is modulated as AFSK.
|
||||
|
||||
Other modules that can be used for RTTY:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for RTTY:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -29,9 +29,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
|
||||
@@ -1,35 +1,35 @@
|
||||
/*
|
||||
RadioLib SSTV Transmit Example
|
||||
RadioLib SSTV Transmit Example
|
||||
|
||||
The following example sends SSTV picture using
|
||||
SX1278's FSK modem.
|
||||
The following example sends SSTV picture using
|
||||
SX1278's FSK modem.
|
||||
|
||||
Other modules that can be used for SSTV:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- SX126x
|
||||
Other modules that can be used for SSTV:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- SX126x
|
||||
|
||||
NOTE: SSTV is an analog modulation, and
|
||||
requires precise frequency control.
|
||||
Some of the above modules can only
|
||||
set their frequency in rough steps,
|
||||
so the result can be distorted.
|
||||
Using high-precision radio with TCXO
|
||||
(like SX126x) is recommended.
|
||||
NOTE: SSTV is an analog modulation, and
|
||||
requires precise frequency control.
|
||||
Some of the above modules can only
|
||||
set their frequency in rough steps,
|
||||
so the result can be distorted.
|
||||
Using high-precision radio with TCXO
|
||||
(like SX126x) is recommended.
|
||||
|
||||
NOTE: Some platforms (such as Arduino Uno)
|
||||
might not be fast enough to correctly
|
||||
send pictures via high-speed modes
|
||||
like Scottie2 or Martin2. For those,
|
||||
lower speed modes such as Wrasse,
|
||||
Scottie1 or Martin1 are recommended.
|
||||
NOTE: Some platforms (such as Arduino Uno)
|
||||
might not be fast enough to correctly
|
||||
send pictures via high-speed modes
|
||||
like Scottie2 or Martin2. For those,
|
||||
lower speed modes such as Wrasse,
|
||||
Scottie1 or Martin1 are recommended.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -42,9 +42,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create SSTV client instance using the FSK module
|
||||
SSTVClient sstv(&radio);
|
||||
|
||||
@@ -1,31 +1,31 @@
|
||||
/*
|
||||
RadioLib SSTV Transmit AFSK Example
|
||||
RadioLib SSTV Transmit AFSK Example
|
||||
|
||||
The following example sends SSTV picture using
|
||||
SX1278's FSK modem. The data is modulated
|
||||
as AFSK.
|
||||
The following example sends SSTV picture using
|
||||
SX1278's FSK modem. The data is modulated
|
||||
as AFSK.
|
||||
|
||||
Other modules that can be used for SSTV:
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
Other modules that can be used for SSTV:
|
||||
with AFSK modulation:
|
||||
- SX127x/RFM9x
|
||||
- RF69
|
||||
- SX1231
|
||||
- CC1101
|
||||
- Si443x/RFM2x
|
||||
- SX126x/LLCC68
|
||||
|
||||
NOTE: Some platforms (such as Arduino Uno)
|
||||
might not be fast enough to correctly
|
||||
send pictures via high-speed modes
|
||||
like Scottie2 or Martin2. For those,
|
||||
lower speed modes such as Wrasse,
|
||||
Scottie1 or Martin1 are recommended.
|
||||
NOTE: Some platforms (such as Arduino Uno)
|
||||
might not be fast enough to correctly
|
||||
send pictures via high-speed modes
|
||||
like Scottie2 or Martin2. For those,
|
||||
lower speed modes such as Wrasse,
|
||||
Scottie1 or Martin1 are recommended.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -38,9 +38,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// create AFSK client instance using the FSK module
|
||||
// this requires connection to the module direct
|
||||
|
||||
+9
-9
@@ -1,16 +1,16 @@
|
||||
/*
|
||||
RadioLib STM32WLx Channel Activity Detection Example
|
||||
RadioLib STM32WLx Channel Activity Detection Example
|
||||
|
||||
This example uses STM32WLx to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
Unlike SX127x CAD, SX126x/STM32WLx can detect any part
|
||||
of LoRa transmission, not just the preamble.
|
||||
This example uses STM32WLx to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
Unlike SX127x CAD, SX126x/STM32WLx can detect any part
|
||||
of LoRa transmission, not just the preamble.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
|
||||
+9
-9
@@ -1,16 +1,16 @@
|
||||
/*
|
||||
RadioLib STM32WLx Channel Activity Detection Example
|
||||
RadioLib STM32WLx Channel Activity Detection Example
|
||||
|
||||
This example uses STM32WLx to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
Unlike SX127x CAD, SX126x/STM32WLx can detect any part
|
||||
of LoRa transmission, not just the preamble.
|
||||
This example uses STM32WLx to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
Unlike SX127x CAD, SX126x/STM32WLx can detect any part
|
||||
of LoRa transmission, not just the preamble.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
|
||||
+19
-22
@@ -1,26 +1,26 @@
|
||||
/*
|
||||
RadioLib STM32WLx Receive with Interrupts Example
|
||||
RadioLib STM32WLx Receive with Interrupts Example
|
||||
|
||||
This example listens for LoRa transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered. To successfully receive data, the following
|
||||
settings have to be the same on both transmitter
|
||||
and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
|
||||
This example assumes Nucleo WL55JC1 is used. For other Nucleo boards
|
||||
or standalone STM32WL, some configuration such as TCXO voltage and
|
||||
RF switch control may have to be adjusted.
|
||||
This example listens for LoRa transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered. To successfully receive data, the following
|
||||
settings have to be the same on both transmitter
|
||||
and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
|
||||
This example assumes Nucleo WL55JC1 is used. For other Nucleo boards
|
||||
or standalone STM32WL, some configuration such as TCXO voltage and
|
||||
RF switch control may have to be adjusted.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -154,8 +154,5 @@ void loop() {
|
||||
Serial.println(state);
|
||||
|
||||
}
|
||||
|
||||
// put module back to listen mode
|
||||
radio.startReceive();
|
||||
}
|
||||
}
|
||||
|
||||
@@ -29,9 +29,13 @@
|
||||
// RESET pin: 3
|
||||
SX1231 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1231 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -28,9 +28,13 @@
|
||||
// RESET pin: 3
|
||||
SX1231 radio = new Module(10, 2, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1231 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+7
-6
@@ -30,12 +30,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+17
-16
@@ -1,18 +1,18 @@
|
||||
/*
|
||||
RadioLib SX126x Channel Activity Detection Example
|
||||
RadioLib SX126x Channel Activity Detection Example
|
||||
|
||||
This example uses SX1262 to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
Unlike SX127x CAD, SX126x can detect any part
|
||||
of LoRa transmission, not just the preamble.
|
||||
This example uses SX1262 to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
Unlike SX127x CAD, SX126x can detect any part
|
||||
of LoRa transmission, not just the preamble.
|
||||
|
||||
Other modules from SX126x family can also be used.
|
||||
Other modules from SX126x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -25,12 +25,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+7
-6
@@ -27,12 +27,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
/*
|
||||
RadioLib SX126x FSK Modem Example
|
||||
RadioLib SX126x FSK Modem Example
|
||||
|
||||
This example shows how to use FSK modem in SX126x chips.
|
||||
This example shows how to use FSK modem in SX126x chips.
|
||||
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
FSK modem, so this code should not be run directly!
|
||||
Instead, modify the other examples to use FSK
|
||||
modem and use the appropriate configuration
|
||||
methods.
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
FSK modem, so this code should not be run directly!
|
||||
Instead, modify the other examples to use FSK
|
||||
modem and use the appropriate configuration
|
||||
methods.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---fsk-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---fsk-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -26,12 +26,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -0,0 +1,95 @@
|
||||
/*
|
||||
RadioLib SX126x LR-FHSS Modem Example
|
||||
|
||||
This example shows how to use LR-FHSS modem in SX126x chips.
|
||||
This modem can only transmit data, and is not able to receive.
|
||||
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
LR-FHSS modem, so this code should not be run directly!
|
||||
Instead, modify the other examples to use LR-FHSS
|
||||
modem and use the appropriate configuration
|
||||
methods.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lr-fhss-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
#include <RadioLib.h>
|
||||
|
||||
// SX1262 has the following connections:
|
||||
// NSS pin: 10
|
||||
// IRQ pin: 2
|
||||
// NRST pin: 3
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
// initialize SX1262 with default settings
|
||||
Serial.print(F("[SX1262] Initializing ... "));
|
||||
int state = radio.beginLRFHSS();
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
} else {
|
||||
Serial.print(F("failed, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
// if needed, you can switch between any of the modems
|
||||
//
|
||||
// radio.begin() start LoRa modem (and disable LR-FHSS)
|
||||
// radio.beginLRFHSS() start LR-FHSS modem (and disable LoRa)
|
||||
|
||||
// the following settings can also
|
||||
// be modified at run-time
|
||||
state = radio.setFrequency(433.5);
|
||||
state = radio.setLrFhssConfig(RADIOLIB_SX126X_LR_FHSS_BW_1523_4, // bandwidth
|
||||
RADIOLIB_SX126X_LR_FHSS_CR_1_2, // coding rate
|
||||
3, // header count
|
||||
0x13A); // hopping sequence seed
|
||||
state = radio.setOutputPower(10.0);
|
||||
state = radio.setSyncWord(0x12345678);
|
||||
if (state != RADIOLIB_ERR_NONE) {
|
||||
Serial.print(F("Unable to set configuration, code "));
|
||||
Serial.println(state);
|
||||
while (true) { delay(10); }
|
||||
}
|
||||
|
||||
#warning "This sketch is just an API guide! Read the note at line 6."
|
||||
}
|
||||
|
||||
void loop() {
|
||||
// LR-FHSS modem can only transmit!
|
||||
// transmit LR-FHSS packet
|
||||
int state = radio.transmit("Hello World!");
|
||||
/*
|
||||
byte byteArr[] = {0x01, 0x23, 0x45, 0x67,
|
||||
0x89, 0xAB, 0xCD, 0xEF};
|
||||
int state = radio.transmit(byteArr, 8);
|
||||
*/
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("[SX1262] Packet transmitted successfully!"));
|
||||
} else if (state == RADIOLIB_ERR_PACKET_TOO_LONG) {
|
||||
Serial.println(F("[SX1262] Packet too long!"));
|
||||
} else if (state == RADIOLIB_ERR_TX_TIMEOUT) {
|
||||
Serial.println(F("[SX1262] Timed out while transmitting!"));
|
||||
} else {
|
||||
Serial.println(F("[SX1262] Failed to transmit packet, code "));
|
||||
Serial.println(state);
|
||||
}
|
||||
|
||||
}
|
||||
@@ -1,11 +1,14 @@
|
||||
/*
|
||||
RadioLib SX126x Ping-Pong Example
|
||||
RadioLib SX126x Ping-Pong Example
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
This example is intended to run on two SX126x radios,
|
||||
and send packets between the two.
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -22,12 +25,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// save transmission states between loops
|
||||
int transmissionState = RADIOLIB_ERR_NONE;
|
||||
|
||||
@@ -1,28 +1,28 @@
|
||||
/*
|
||||
RadioLib SX126x Blocking Receive Example
|
||||
RadioLib SX126x Blocking Receive Example
|
||||
|
||||
This example listens for LoRa transmissions using SX126x Lora modules.
|
||||
To successfully receive data, the following settings have to be the same
|
||||
on both transmitter and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
- preamble length
|
||||
This example listens for LoRa transmissions using SX126x Lora modules.
|
||||
To successfully receive data, the following settings have to be the same
|
||||
on both transmitter and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
- preamble length
|
||||
|
||||
Other modules from SX126x family can also be used.
|
||||
Other modules from SX126x family can also be used.
|
||||
|
||||
Using blocking receive is not recommended, as it will lead
|
||||
to significant amount of timeouts, inefficient use of processor
|
||||
time and can some miss packets!
|
||||
Instead, interrupt receive is recommended.
|
||||
Using blocking receive is not recommended, as it will lead
|
||||
to significant amount of timeouts, inefficient use of processor
|
||||
time and can some miss packets!
|
||||
Instead, interrupt receive is recommended.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -35,12 +35,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+23
-22
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib SX126x Receive with Interrupts Example
|
||||
RadioLib SX126x Receive with Interrupts Example
|
||||
|
||||
This example listens for LoRa transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered. To successfully receive data, the following
|
||||
settings have to be the same on both transmitter
|
||||
and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
This example listens for LoRa transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered. To successfully receive data, the following
|
||||
settings have to be the same on both transmitter
|
||||
and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
|
||||
Other modules from SX126x family can also be used.
|
||||
Other modules from SX126x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -31,12 +31,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,27 +1,27 @@
|
||||
/*
|
||||
RadioLib SX126x Settings Example
|
||||
RadioLib SX126x Settings Example
|
||||
|
||||
This example shows how to change all the properties of LoRa transmission.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, DIO1, DIO2, BUSY pin)
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
- output power during transmission
|
||||
- CRC
|
||||
- preamble length
|
||||
- TCXO voltage
|
||||
- DIO2 RF switch control
|
||||
This example shows how to change all the properties of LoRa transmission.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, DIO1, DIO2, BUSY pin)
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
- output power during transmission
|
||||
- CRC
|
||||
- preamble length
|
||||
- TCXO voltage
|
||||
- DIO2 RF switch control
|
||||
|
||||
Other modules from SX126x family can also be used.
|
||||
Other modules from SX126x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -41,12 +41,13 @@ SX1262 radio1 = new Module(10, 2, 3, 9);
|
||||
// BUSY pin: 6
|
||||
SX1268 radio2 = new Module(8, 4, 5, 6);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1261 radio3 = RadioShield.ModuleB;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio3 = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib SX126x Spectrum Scan Example
|
||||
RadioLib SX126x Spectrum Scan Example
|
||||
|
||||
This example shows how to perform a spectrum power scan using SX126x.
|
||||
The output is in the form of scan lines, each line has 33 power bins.
|
||||
First power bin corresponds to -11 dBm, the second to -15 dBm and so on.
|
||||
Higher number of samples in a bin corresponds to more power received
|
||||
at that level.
|
||||
This example shows how to perform a spectrum power scan using SX126x.
|
||||
The output is in the form of scan lines, each line has 33 power bins.
|
||||
First power bin corresponds to -11 dBm, the second to -15 dBm and so on.
|
||||
Higher number of samples in a bin corresponds to more power received
|
||||
at that level.
|
||||
|
||||
To show the results in a plot, run the Python script
|
||||
RadioLib/extras/SX126x_Spectrum_Scan/SpectrumScan.py
|
||||
To show the results in a plot, run the Python script
|
||||
RadioLib/extras/SX126x_Spectrum_Scan/SpectrumScan.py
|
||||
|
||||
WARNING: This functionality is experimental and requires a binary patch
|
||||
to be uploaded to the SX126x device. There may be some undocumented
|
||||
side effects!
|
||||
WARNING: This functionality is experimental and requires a binary patch
|
||||
to be uploaded to the SX126x device. There may be some undocumented
|
||||
side effects!
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -34,6 +34,14 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(115200);
|
||||
|
||||
|
||||
+23
-15
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib SX126x Spectrum Scan Example
|
||||
RadioLib SX126x Spectrum Scan Example
|
||||
|
||||
This example shows how to perform a spectrum power scan using SX126x.
|
||||
The output is in the form of scan lines, each line has 33 power bins.
|
||||
First power bin corresponds to -11 dBm, the second to -15 dBm and so on.
|
||||
Higher number of samples in a bin corresponds to more power received
|
||||
at that level. The example performs frequency sweep over a given range.
|
||||
This example shows how to perform a spectrum power scan using SX126x.
|
||||
The output is in the form of scan lines, each line has 33 power bins.
|
||||
First power bin corresponds to -11 dBm, the second to -15 dBm and so on.
|
||||
Higher number of samples in a bin corresponds to more power received
|
||||
at that level. The example performs frequency sweep over a given range.
|
||||
|
||||
To show the results in a plot, run the Python script
|
||||
RadioLib/extras/SX126x_Spectrum_Scan/SpectrumScan.py
|
||||
To show the results in a plot, run the Python script
|
||||
RadioLib/extras/SX126x_Spectrum_Scan/SpectrumScan.py
|
||||
|
||||
WARNING: This functionality is experimental and requires a binary patch
|
||||
to be uploaded to the SX126x device. There may be some undocumented
|
||||
side effects!
|
||||
WARNING: This functionality is experimental and requires a binary patch
|
||||
to be uploaded to the SX126x device. There may be some undocumented
|
||||
side effects!
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx126x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -34,6 +34,14 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// frequency range in MHz to scan
|
||||
const float freqStart = 431;
|
||||
const float freqEnd = 435;
|
||||
|
||||
@@ -30,12 +30,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+7
-6
@@ -27,12 +27,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1262 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1262 radio = RadioShield.ModuleA;
|
||||
|
||||
// or using CubeCell
|
||||
//SX1262 radio = new Module(RADIOLIB_BUILTIN_MODULE);
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// save transmission state between loops
|
||||
int transmissionState = RADIOLIB_ERR_NONE;
|
||||
|
||||
+7
-3
@@ -31,9 +31,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+18
-14
@@ -1,19 +1,19 @@
|
||||
/*
|
||||
RadioLib SX127x Channel Activity Detection with Interrupts Example
|
||||
RadioLib SX127x Channel Activity Detection with Interrupts Example
|
||||
|
||||
This example scans the current LoRa channel and detects
|
||||
valid LoRa preambles. Preamble is the first part of
|
||||
LoRa transmission, so this can be used to check
|
||||
if the LoRa channel is free, or if you should start
|
||||
receiving a message.
|
||||
This example scans the current LoRa channel and detects
|
||||
valid LoRa preambles. Preamble is the first part of
|
||||
LoRa transmission, so this can be used to check
|
||||
if the LoRa channel is free, or if you should start
|
||||
receiving a message.
|
||||
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -26,9 +26,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
// Serial port speed must be high enough for this example
|
||||
|
||||
+23
-19
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib SX127x Receive after Channel Activity Detection Example
|
||||
RadioLib SX127x Receive after Channel Activity Detection Example
|
||||
|
||||
This example scans the current LoRa channel and detects
|
||||
valid LoRa preambles. Preamble is the first part of
|
||||
LoRa transmission, so this can be used to check
|
||||
if the LoRa channel is free, or if you should start
|
||||
receiving a message. If a preamble is detected,
|
||||
the module will switch to receive mode and receive the packet.
|
||||
|
||||
For most use-cases, it should be enough to just use the
|
||||
interrupt-driven reception described in the example
|
||||
"SX127x_Receive_Interrupt".
|
||||
This example scans the current LoRa channel and detects
|
||||
valid LoRa preambles. Preamble is the first part of
|
||||
LoRa transmission, so this can be used to check
|
||||
if the LoRa channel is free, or if you should start
|
||||
receiving a message. If a preamble is detected,
|
||||
the module will switch to receive mode and receive the packet.
|
||||
|
||||
For most use-cases, it should be enough to just use the
|
||||
interrupt-driven reception described in the example
|
||||
"SX127x_Receive_Interrupt".
|
||||
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -31,9 +31,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
// Serial port speed must be high enough for this example
|
||||
|
||||
@@ -1,19 +1,19 @@
|
||||
/*
|
||||
RadioLib SX127x FSK Modem Example
|
||||
RadioLib SX127x FSK Modem Example
|
||||
|
||||
This example shows how to use FSK modem in SX127x chips.
|
||||
This example shows how to use FSK modem in SX127x chips.
|
||||
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
FSK modem, so this code should not be run directly!
|
||||
Instead, modify the other examples to use FSK
|
||||
modem and use the appropriate configuration
|
||||
methods.
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
FSK modem, so this code should not be run directly!
|
||||
Instead, modify the other examples to use FSK
|
||||
modem and use the appropriate configuration
|
||||
methods.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---fsk-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---fsk-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -26,9 +26,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,11 +1,14 @@
|
||||
/*
|
||||
RadioLib SX127x Ping-Pong Example
|
||||
RadioLib SX127x Ping-Pong Example
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
This example is intended to run on two SX126x radios,
|
||||
and send packets between the two.
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -22,9 +25,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// save transmission states between loops
|
||||
int transmissionState = RADIOLIB_ERR_NONE;
|
||||
|
||||
@@ -35,9 +35,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
/*
|
||||
RadioLib SX127x Direct Receive Example
|
||||
RadioLib SX127x Direct Receive Example
|
||||
|
||||
This example shows how to receive FSK packets without using
|
||||
SX127x packet engine.
|
||||
This example shows how to receive FSK packets without using
|
||||
SX127x packet engine.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -24,9 +24,13 @@ SX1278 radio = new Module(10, 2, 9, 3);
|
||||
// DIO2 pin: 5
|
||||
const int pin = 5;
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib SX127x Transmit with Frequency Hopping Example
|
||||
RadioLib SX127x Transmit with Frequency Hopping Example
|
||||
|
||||
This example transmits packets using SX1278 LoRa radio module.
|
||||
Each packet contains up to 256 bytes of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
This example transmits packets using SX1278 LoRa radio module.
|
||||
Each packet contains up to 256 bytes of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
|
||||
SX127x supports FHSS or Frequency Hopping Spread Spectrum.
|
||||
Once a hopping period is set and a transmission is started, the radio
|
||||
will begin triggering interrupts every hop period where the radio frequency
|
||||
is changed to the next channel.
|
||||
SX127x supports FHSS or Frequency Hopping Spread Spectrum.
|
||||
Once a hopping period is set and a transmission is started, the radio
|
||||
will begin triggering interrupts every hop period where the radio frequency
|
||||
is changed to the next channel.
|
||||
*/
|
||||
|
||||
#include <RadioLib.h>
|
||||
@@ -30,9 +30,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// flag to indicate that a packet was received
|
||||
volatile bool receivedFlag = false;
|
||||
@@ -86,6 +90,7 @@ void setup() {
|
||||
|
||||
// set hop period in symbols
|
||||
// this will also enable FHSS
|
||||
Serial.print(F("[SX1278] Setting hopping period ... "));
|
||||
state = radio.setFHSSHoppingPeriod(9);
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
@@ -153,6 +158,9 @@ void loop() {
|
||||
// reset the counter
|
||||
hopsCompleted = 0;
|
||||
|
||||
// return to home channel before the next transaction
|
||||
radio.setFrequency(channels[0]);
|
||||
|
||||
// put the module back to listen mode
|
||||
radio.startReceive();
|
||||
|
||||
|
||||
+23
-19
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib SX127x Receive with Interrupts Example
|
||||
RadioLib SX127x Receive with Interrupts Example
|
||||
|
||||
This example listens for LoRa transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered. To successfully receive data, the following
|
||||
settings have to be the same on both transmitter
|
||||
and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
This example listens for LoRa transmissions and tries to
|
||||
receive them. Once a packet is received, an interrupt is
|
||||
triggered. To successfully receive data, the following
|
||||
settings have to be the same on both transmitter
|
||||
and receiver:
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -31,9 +31,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,23 +1,23 @@
|
||||
/*
|
||||
RadioLib SX127x Settings Example
|
||||
RadioLib SX127x Settings Example
|
||||
|
||||
This example shows how to change all the properties of LoRa transmission.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, digital IO 0, digital IO 1)
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
- output power during transmission
|
||||
This example shows how to change all the properties of LoRa transmission.
|
||||
RadioLib currently supports the following settings:
|
||||
- pins (SPI slave select, digital IO 0, digital IO 1)
|
||||
- carrier frequency
|
||||
- bandwidth
|
||||
- spreading factor
|
||||
- coding rate
|
||||
- sync word
|
||||
- output power during transmission
|
||||
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -37,9 +37,13 @@ SX1278 radio1 = new Module(10, 2, 9, 3);
|
||||
// DIO1 pin: 6
|
||||
SX1272 radio2 = new Module(9, 4, 5, 6);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1276 radio3 = RadioShield.ModuleB;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio3 = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -30,9 +30,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
@@ -1,24 +1,24 @@
|
||||
/*
|
||||
RadioLib SX127x Transmit with Frequency Hopping Example
|
||||
RadioLib SX127x Transmit with Frequency Hopping Example
|
||||
|
||||
This example transmits packets using SX1278 LoRa radio module.
|
||||
Each packet contains up to 255 bytes of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
This example transmits packets using SX1278 LoRa radio module.
|
||||
Each packet contains up to 255 bytes of data, in the form of:
|
||||
- Arduino String
|
||||
- null-terminated char array (C-string)
|
||||
- arbitrary binary data (byte array)
|
||||
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
Other modules from SX127x/RFM9x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx127xrfm9x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
|
||||
SX127x supports FHSS or Frequency Hopping Spread Spectrum.
|
||||
Once a hopping period is set and a transmission is started, the radio
|
||||
will begin triggering interrupts every hop period where the radio frequency
|
||||
is changed to the next channel.
|
||||
SX127x supports FHSS or Frequency Hopping Spread Spectrum.
|
||||
Once a hopping period is set and a transmission is started, the radio
|
||||
will begin triggering interrupts every hop period where the radio frequency
|
||||
is changed to the next channel.
|
||||
*/
|
||||
|
||||
#include <RadioLib.h>
|
||||
@@ -30,9 +30,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// flag to indicate that a packet was received
|
||||
volatile bool transmittedFlag = false;
|
||||
@@ -98,6 +102,7 @@ void setup() {
|
||||
|
||||
// set hop period in symbols
|
||||
// this will also enable FHSS
|
||||
Serial.print(F("[SX1278] Setting hopping period ... "));
|
||||
state = radio.setFHSSHoppingPeriod(9);
|
||||
if (state == RADIOLIB_ERR_NONE) {
|
||||
Serial.println(F("success!"));
|
||||
@@ -147,7 +152,7 @@ void loop() {
|
||||
hopsCompleted = 0;
|
||||
|
||||
// return to home channel before the next transaction
|
||||
radio.setFrequency(channels[radio.getFHSSChannel() % numberOfChannels]);
|
||||
radio.setFrequency(channels[0]);
|
||||
|
||||
// wait a second before transmitting again
|
||||
delay(1000);
|
||||
|
||||
+7
-3
@@ -27,9 +27,13 @@
|
||||
// DIO1 pin: 3
|
||||
SX1278 radio = new Module(10, 2, 9, 3);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1278 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
// save transmission state between loops
|
||||
int transmissionState = RADIOLIB_ERR_NONE;
|
||||
|
||||
@@ -1,21 +1,21 @@
|
||||
/*
|
||||
RadioLib SX128x BLE Modem Example
|
||||
RadioLib SX128x BLE Modem Example
|
||||
|
||||
This example shows how to use BLE modem in SX128x chips.
|
||||
RadioLib does not provide BLE protocol support (yet),
|
||||
only compatibility with the physical layer.
|
||||
This example shows how to use BLE modem in SX128x chips.
|
||||
RadioLib does not provide BLE protocol support (yet),
|
||||
only compatibility with the physical layer.
|
||||
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
BLE modem, so this code should not be run directly!
|
||||
Instead, modify the other examples to use BLE
|
||||
modem and use the appropriate configuration
|
||||
methods.
|
||||
NOTE: The sketch below is just a guide on how to use
|
||||
BLE modem, so this code should not be run directly!
|
||||
Instead, modify the other examples to use BLE
|
||||
modem and use the appropriate configuration
|
||||
methods.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx128x---ble-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx128x---ble-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -28,9 +28,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1280 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1280 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+7
-3
@@ -28,9 +28,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1280 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1280 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
+15
-11
@@ -1,16 +1,16 @@
|
||||
/*
|
||||
RadioLib SX128x Channel Activity Detection Example
|
||||
RadioLib SX128x Channel Activity Detection Example
|
||||
|
||||
This example uses SX1280 to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
This example uses SX1280 to scan the current LoRa
|
||||
channel and detect ongoing LoRa transmissions.
|
||||
|
||||
Other modules from SX128x family can also be used.
|
||||
Other modules from SX128x family can also be used.
|
||||
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx128x---lora-modem
|
||||
For default module settings, see the wiki page
|
||||
https://github.com/jgromes/RadioLib/wiki/Default-configuration#sx128x---lora-modem
|
||||
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
For full API reference, see the GitHub Pages
|
||||
https://jgromes.github.io/RadioLib/
|
||||
*/
|
||||
|
||||
// include the library
|
||||
@@ -23,9 +23,13 @@
|
||||
// BUSY pin: 9
|
||||
SX1280 radio = new Module(10, 2, 3, 9);
|
||||
|
||||
// or using RadioShield
|
||||
// https://github.com/jgromes/RadioShield
|
||||
//SX1280 radio = RadioShield.ModuleA;
|
||||
// or detect the pinout automatically using RadioBoards
|
||||
// https://github.com/radiolib-org/RadioBoards
|
||||
/*
|
||||
#define RADIO_BOARD_AUTO
|
||||
#include <RadioBoards.h>
|
||||
Radio radio = new RadioModule();
|
||||
*/
|
||||
|
||||
void setup() {
|
||||
Serial.begin(9600);
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user