Update readme
This commit is contained in:
@@ -52,6 +52,9 @@ examples
|
||||
## 3️⃣ Tips:
|
||||
|
||||
1. If a microphone is used, the GPIOO button cannot be used
|
||||
2. If the sketch cannot be uploaded, then you need to press down the middle of the trackball, and then insert the USB, this means the chip is in the download mode, and then click to upload the sketch.
|
||||
3. The programming and burning interface of ESP32C3 is located at the 6Pin header on the side of the RST button, and the order starts from the top of the RST button, which are 3V3, GND, RST, BOOT, RX, TX
|
||||
|
||||
|
||||
## 4️⃣ Where to buy:
|
||||
|
||||
|
||||
@@ -57,6 +57,8 @@ examples
|
||||
## 3️⃣ 提示:
|
||||
|
||||
0. 如果启用麦克风,那么板子中间的按钮,GPIO0则不可用.
|
||||
1. 如果遇到不能上传草图,那么你需要将轨迹球中间按压下去,然后插入USB,这是芯片处于下载模式,此时再点击上传草图.
|
||||
2. ESP32C3的编程烧录接口在RST按键一侧的6Pin排针那里,顺序从RST按键上方开始数,分别为3V3,GND,RST,BOOT,RX,TX
|
||||
|
||||
|
||||
## 4️⃣ 在哪购买:
|
||||
|
||||
@@ -0,0 +1,4 @@
|
||||
# How falsh ?
|
||||
|
||||
1. [Win10](https://github.com/Xinyuan-LilyGO/LilyGo-Document/blob/master/WinFlashBin.md)
|
||||
2. [Mac & Liunx](https://github.com/Xinyuan-LilyGO/LilyGo-Document/blob/master/MacFlashBin.md)
|
||||
Reference in New Issue
Block a user