Added WiFi test & GPS Check version

This commit is contained in:
lewisxhe
2024-08-16 17:57:52 +08:00
parent 410d6a9cf6
commit be6fcd1176
+151 -4
View File
@@ -25,6 +25,7 @@
#include "es7210.h"
#include <Audio.h>
#include <driver/i2s.h>
#include <WiFi.h>
// By default, the audio pass-through speaker is used for testing, and esp_sr can also be used for noise detection.
#define USE_ESP_VAD
@@ -175,6 +176,122 @@ SemaphoreHandle_t xSemaphore = NULL;
void setupLvgl();
#include <esp_sntp.h>
#define WIFI_SSID "You WIFI SSID"
#define WIFI_PASS "You WIFI PASSWORD"
#define NTP_SERVER1 "pool.ntp.org"
#define NTP_SERVER2 "time.nist.gov"
#define DEFAULT_TIMEZONE "CST-8" //When the time zone cannot be obtained, the default time zone is used
bool setupGPS()
{
SerialGPS.begin(9600, SERIAL_8N1, BOARD_GPS_RX_PIN, BOARD_GPS_TX_PIN);
bool result = false;
uint32_t startTimeout ;
for (int i = 0; i < 3; ++i) {
SerialGPS.write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
delay(5);
// Get version information
startTimeout = millis() + 3000;
Serial.print("Try to init L76K . Wait stop .");
while (SerialGPS.available()) {
Serial.print(".");
SerialGPS.readString();
if (millis() > startTimeout) {
Serial.println("Wait L76K stop NMEA timeout!");
return false;
}
};
Serial.println();
SerialGPS.flush();
delay(200);
SerialGPS.write("$PCAS06,0*1B\r\n");
startTimeout = millis() + 500;
String ver = "";
while (!SerialGPS.available()) {
if (millis() > startTimeout) {
Serial.println("Get L76K timeout!");
return false;
}
}
SerialGPS.setTimeout(10);
ver = SerialGPS.readStringUntil('\n');
if (ver.startsWith("$GPTXT,01,01,02")) {
Serial.println("L76K GNSS init succeeded, using L76K GNSS Module\n");
result = true;
break;
}
delay(500);
}
// Initialize the L76K Chip, use GPS + GLONASS
SerialGPS.write("$PCAS04,5*1C\r\n");
delay(250);
// only ask for RMC and GGA
SerialGPS.write("$PCAS03,1,0,0,0,1,0,0,0,0,0,,,0,0*02\r\n");
delay(250);
// Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
SerialGPS.write("$PCAS11,3*1E\r\n");
return result;
}
static void time_available_cb(struct timeval *t)
{
Serial.println("Got time adjustment from NTP!");
}
static void wifi_event_cb(WiFiEvent_t event)
{
Serial.printf("[WiFi-event] event: %d\n", event);
switch (event) {
case ARDUINO_EVENT_WIFI_READY:
Serial.println("WiFi interface ready");
break;
case ARDUINO_EVENT_WIFI_SCAN_DONE:
Serial.println("Completed scan for access points");
break;
case ARDUINO_EVENT_WIFI_STA_START:
Serial.println("WiFi client started");
break;
case ARDUINO_EVENT_WIFI_STA_STOP:
Serial.println("WiFi clients stopped");
break;
case ARDUINO_EVENT_WIFI_STA_CONNECTED:
Serial.println("Connected to access point");
break;
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
Serial.println("Disconnected from WiFi access point");
break;
case ARDUINO_EVENT_WIFI_STA_AUTHMODE_CHANGE:
Serial.println("Authentication mode of access point has changed");
break;
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
Serial.print("Obtained IP address: ");
Serial.println(WiFi.localIP());
break;
case ARDUINO_EVENT_WIFI_STA_LOST_IP:
Serial.println("Lost IP address and IP address is reset to 0");
break;
default: break;
}
}
void setupWiFi()
{
WiFi.onEvent(wifi_event_cb);
WiFi.begin(WIFI_SSID, WIFI_PASS);
configTzTime(DEFAULT_TIMEZONE, NTP_SERVER1, NTP_SERVER2);
// set notification call-back function
sntp_set_time_sync_notification_cb(time_available_cb);
}
// LilyGo T-Deck control backlight chip has 16 levels of adjustment range
// The adjustable range is 0~15, 0 is the minimum brightness, 15 is the maximum brightness
void setBrightness(uint8_t value)
@@ -1065,15 +1182,14 @@ void setup()
xSemaphoreGive( xSemaphore );
Serial.print("Init display id:");
Serial.println(USER_SETUP_ID);
tft.begin();
/**
* * T-Deck-Plus and T-Deck display panels are different.
* * This initialization is used to override the initialization parameters.
* * T-Deck-Plus and T-Deck display panels are different.
* * This initialization is used to override the initialization parameters.
* * It is used when the display is abnormal after the TFT_eSPI update. */
#if 0
for (uint8_t i = 0; i < (sizeof(lcd_st7789v) / sizeof(lcd_cmd_t)); i++) {
@@ -1092,7 +1208,13 @@ void setup()
tft.fillScreen(TFT_BLACK);
SerialGPS.begin(GPS_BAUD, SERIAL_8N1, BOARD_GPS_RX_PIN, BOARD_GPS_TX_PIN);
setupWiFi();
if (!setupGPS()) {
// set ubox m10q gps baudrate 38400
SerialGPS.begin(38400, SERIAL_8N1, BOARD_GPS_RX_PIN, BOARD_GPS_TX_PIN);
}
Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
@@ -1113,6 +1235,7 @@ void setup()
kbDected = checkKb();
setupLvgl();
SPIFFS.begin();
@@ -1240,6 +1363,30 @@ void setup()
lv_label_set_text(label, "Sleep");
lv_obj_center(label);
label = lv_label_create(lv_scr_act());
lv_label_set_text(label, "00:00:00");
lv_obj_align(label, LV_ALIGN_TOP_RIGHT, 0, 0);
lv_timer_create([](lv_timer_t *t) {
lv_obj_t *label = (lv_obj_t *)t->user_data;
if (WiFi.isConnected()) {
time_t now;
struct tm timeinfo;
time(&now);
localtime_r(&now, &timeinfo);
char datetime[128] = {0};
snprintf(datetime, 128, "%d/%d/%d %d:%d:%d", timeinfo.tm_year + 1900, timeinfo.tm_mon + 1, timeinfo.tm_mday, timeinfo.tm_hour, timeinfo.tm_min, timeinfo.tm_sec);
lv_label_set_text_fmt(label, "%s\nIP:%s\nRSSI:%d", datetime, WiFi.localIP().toString(), WiFi.RSSI());
} else {
lv_label_set_text(label, "NO CONNECT");
}
}, 1000, label);
lv_obj_t *btn_ui2 = lv_obj_create(main_count);
lv_obj_set_style_bg_opa(btn_ui2, LV_OPA_TRANSP, 0);
lv_obj_set_size(btn_ui2, LV_PCT(100), LV_PCT(20));