This commit is contained in:
@@ -0,0 +1,109 @@
|
||||
/**
|
||||
* @file SimpleTone.ino
|
||||
* @author Lewis He (lewishe@outlook.com)
|
||||
* @license MIT
|
||||
* @copyright Copyright (c) 2025 ShenZhen XinYuan Electronic Technology Co., Ltd
|
||||
* @date 2025-09-25
|
||||
*
|
||||
*/
|
||||
#include <driver/i2s.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
//! The board peripheral power control pin needs to be set to HIGH when using the peripheral
|
||||
#define BOARD_POWERON 10
|
||||
|
||||
// I2S configuration parameters
|
||||
#define I2S_BCK_PIN 7 // Bit clock pin
|
||||
#define I2S_WS_PIN 5 // Word select pin (LRCK)
|
||||
#define I2S_DATA_PIN 6 // Data pin
|
||||
|
||||
// Sound parameters
|
||||
#define SAMPLE_RATE 8000 // Sampling rate
|
||||
#define BB_FREQ 1000 // BB sound frequency (Hz). 1000Hz sounds more like a beep.
|
||||
#define AMPLITUDE 16384 // Amplitude (moderate volume)
|
||||
#define BEEP_DURATION 100 // Duration of each beep (milliseconds)
|
||||
#define INTERVAL 1000 // Interval between beeps (milliseconds)
|
||||
|
||||
unsigned long previousMillis = 0; // Record the last beep time
|
||||
bool isBeeping = false; // Check if the sound is playing
|
||||
unsigned long beepStartTime = 0; // Record the start time of this sound
|
||||
|
||||
void setup()
|
||||
{
|
||||
Serial.begin(115200);
|
||||
|
||||
//! The board peripheral power control pin needs to be set to HIGH when using the peripheral
|
||||
pinMode(BOARD_POWERON, OUTPUT);
|
||||
digitalWrite(BOARD_POWERON, HIGH);
|
||||
|
||||
i2s_config_t i2s_config = {
|
||||
.mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_TX),
|
||||
.sample_rate = SAMPLE_RATE,
|
||||
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
||||
.channel_format = I2S_CHANNEL_FMT_ONLY_LEFT, // 单声道
|
||||
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
|
||||
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1, // 中断优先级
|
||||
.dma_buf_count = 8,
|
||||
.dma_buf_len = 64
|
||||
};
|
||||
|
||||
i2s_driver_install(I2S_NUM_0, &i2s_config, 0, NULL);
|
||||
|
||||
i2s_pin_config_t pin_config = {
|
||||
.bck_io_num = I2S_BCK_PIN,
|
||||
.ws_io_num = I2S_WS_PIN,
|
||||
.data_out_num = I2S_DATA_PIN,
|
||||
.data_in_num = I2S_PIN_NO_CHANGE
|
||||
};
|
||||
|
||||
i2s_set_pin(I2S_NUM_0, &pin_config);
|
||||
|
||||
}
|
||||
|
||||
void loop()
|
||||
{
|
||||
unsigned long currentMillis = millis();
|
||||
|
||||
if (!isBeeping && currentMillis - previousMillis >= INTERVAL) {
|
||||
isBeeping = true;
|
||||
beepStartTime = currentMillis;
|
||||
previousMillis = currentMillis;
|
||||
}
|
||||
|
||||
if (isBeeping && currentMillis - beepStartTime >= BEEP_DURATION) {
|
||||
isBeeping = false;
|
||||
}
|
||||
|
||||
if (isBeeping) {
|
||||
generateBeep();
|
||||
} else {
|
||||
generateSilence();
|
||||
}
|
||||
}
|
||||
|
||||
void generateBeep()
|
||||
{
|
||||
static uint32_t sample_counter = 0;
|
||||
const uint32_t samples_per_cycle = SAMPLE_RATE / BB_FREQ;
|
||||
|
||||
int16_t samples[128];
|
||||
|
||||
for (int i = 0; i < 128; i++) {
|
||||
if ((sample_counter % samples_per_cycle) < (samples_per_cycle / 2)) {
|
||||
samples[i] = AMPLITUDE;
|
||||
} else {
|
||||
samples[i] = -AMPLITUDE;
|
||||
}
|
||||
sample_counter++;
|
||||
}
|
||||
|
||||
size_t bytes_written;
|
||||
i2s_write(I2S_NUM_0, samples, sizeof(samples), &bytes_written, portMAX_DELAY);
|
||||
}
|
||||
|
||||
void generateSilence()
|
||||
{
|
||||
int16_t samples[128] = {0};
|
||||
size_t bytes_written;
|
||||
i2s_write(I2S_NUM_0, samples, sizeof(samples), &bytes_written, portMAX_DELAY);
|
||||
}
|
||||
Reference in New Issue
Block a user