Add a SoundDetector that reads the ES7210 as a 4-slot TDM stream
(slot 0 = MIC1/left, slot 2 = MIC3/right), tracks a per-channel RMS
envelope with an adaptive noise floor, and publishes a stereo balance
plus a dB-mapped loudness.
The radar sketch now slides a single reused blip left/right from the
balance and moves it nearer as the loudness rises, instead of firing a
hardcoded demo blip. The device's own ping/click mutes the detector for
200 ms so it cannot hear itself.
The trackball stays detached: GPIO0 is unavailable while the ES7210
microphones are running.
The sound task used to zero the I2S TX DMA ring as soon as the event
queue drained. i2s_write() only queues samples, so anything shorter than
the ~64 ms ring was erased before it reached the speaker. Enable
tx_desc_auto_clear instead, which clears each descriptor after the DMA
has actually transmitted it.
Also add the NoiseSensor radar example and point the default PlatformIO
environment at it.