Commit Graph
5 Commits
Author SHA1 Message Date
Dejvino 7df1a2d785 Fix short beeps silent on HW: i2s_zero_dma_buffer erased the unplayed DMA ring
The legacy I2S driver buffers i2s_write() data in a TX DMA ring
(8x64 samples = 64 ms @ 8 kHz) and hands a buffer back to i2s_write()
only after the DMA finished playing it. After the last queued event
the sound task called i2s_zero_dma_buffer(), which memsets the whole
ring instantly — erasing everything not yet played. Any sound <= 64 ms
was written into free ring space without ever blocking, so the zeroing
wiped it before the DMA reached a single sample: completely silent on
hardware. Longer tones force i2s_write() to block on a full ring,
pacing rendering to real-time playback — hence only long beeps were
audible, and the fade-envelope cap never moved the threshold. Every
game beep <= 80 ms (link-active 10, laser 30, sever 40, bleep/ICE 50,
feedback 80) sat in the dead zone. The emulator never showed it: its
i2s_write shim fed SDL directly and had no ring at all.

Fix: replace the instant zeroing with a paced silence purge — once the
queue drains, write one ring + one chunk of zero samples through
i2s_write(), reusing each DMA buffer only after the DMA played it. The
sound plays out fully and the ring then loops silence (still kills the
tail-replay bug the zeroing existed for). Keep the envelope cap at
total/4 so short tones keep a steady-state portion.

Emulator shim gains a TX DMA ring model (write/play cursors + bounded
DAC-emitted log) so the bug class reproduces headlessly: unit/
sound_short_tone_reaches_dac fails on the zero_dma code, passes on the
purge (A/B verified); shim_zero_dma_erases_unplayed pins model fidelity;
sound_long_tone_plays_out_fully guards against truncation. SoundEngine
gains a pumpOne() test seam and begin(spawnTask) for deterministic
driving. Full suite: 26 unit + 7 integration + 4 E2E, 0 failures.
2026-11-15 12:19:21 +01:00
Dejvino 1dcc87d8d4 Fix trackball click: I2S MCLK was claiming GPIO0; emulator pin-ownership parity
Root cause (on device): sound_engine zero-initialized i2s_pin_config_t,
leaving mck_io_num == 0. i2s_set_pin() then claimed GPIO0 — an
MCLK-capable pin on the S3 and the trackball centre / BOOT line — as
its MCLK output. Verified on device with a diagnostic build: pin0 read
LOW at idle, exactly one latched FALLING edge, clicks never registered.

- sound_engine: set pins.mck_io_num = I2S_PIN_NO_CHANGE explicitly.
- NetDeck: register the trackball click on release with contact-bounce
  collapse (the proven CrtTerminal pattern); pollTouch re-arms when
  isPressed() stays true but getPoint() reports no points (stuck GT911
  IRQ on some units).
- Emulator parity (so this class of bug dies before flashing):
  GPIO-matrix pin-ownership model in the shim — i2s_set_pin() claims
  its pins, claimed pins are dead inputs (digitalRead LOW, no edges,
  loud WARNING on claim/ISR collisions); host pin writes go through
  emu::setPin/togglePin with an edge-accurate ISR latch (a full
  press+release pulse between dispatches no longer gets swallowed);
  E2E inits SDL_INIT_AUDIO so the I2S path actually runs there.
  Regression coverage: e2e/trackball_click (fails on the old engine),
  unit/shim_claimed_pin_is_dead_input,
  unit/shim_edge_survives_same_dispatch_pulse.
- Makefile: firmware step follows the sketch move (root platformio.ini,
  src_dir = src/netdeck).
- HW.md: new notes file for emulator-vs-hardware quirks and the
  on-device debugging recipe.

On-device verified: clicks register in both views (beacon drops, node
routing). Fast layer 23 unit + 7 integration green. Note: e2e
boot_and_controls + network_journey failures are pre-existing at HEAD
(reproduced on a clean stash before this change).
2026-11-15 10:24:30 +01:00
Dejvino 21d37486cf Emulator: migrate SDL2 -> SDL3
Port the shared emulator harness (all apps) to SDL 3.4 + SDL3_ttf 3.2:
- window creation without position args; renderer logical size via
  SDL_SetRenderLogicalPresentation(LETTERBOX); SDL_RenderTexture;
  SDL_SaveBMP_IO frame dumps
- SDL_EVENT_* event scheme, flattened SDL_KeyboardEvent, float mouse
  coords; clicks mapped with SDL_ConvertEventToRenderCoordinates, keeping
  the Xwayland global-state cross-check from 260a2b3
- audio shim on the stream API (SDL_OpenAudioDeviceStream +
  SDL_PutAudioStreamData) since SDL_QueueAudio is gone
- TTF_RenderText_Blended (explicit length); SDL3_ttf header layout
  handled via __has_include (Ubuntu installs under SDL3_ttf/)
- e2e freeze-tint pixel assertions updated to the committed
  diagonal-stripe pattern (stale since the freeze rework; pre-existing
  failures at HEAD under SDL2), sampled away from the freeze text

Full suite green: 14 unit + 7 integration + 3 E2E journeys, 0 failures.
MissileCommand, MiataDrive, NetDeck build; CrtTerminal (missing sndBlip
declaration) and Lotus3 (sketch not in repo) fail identically at HEAD -
pre-existing, out of scope.
2026-11-14 17:03:30 +01:00
Dejvino 7dfdc06e6f Add NoiseSensor radar example and fix short sound playback
The sound task used to zero the I2S TX DMA ring as soon as the event
queue drained. i2s_write() only queues samples, so anything shorter than
the ~64 ms ring was erased before it reached the speaker. Enable
tx_desc_auto_clear instead, which clears each descriptor after the DMA
has actually transmitted it.

Also add the NoiseSensor radar example and point the default PlatformIO
environment at it.
2026-11-12 08:14:19 +01:00
Dejvino d4e6b4e6be Add Missile Command game for T-Deck + desktop emulator
Game (examples/MissileCommand):
- Classic Missile Command: 6 cities, 3 batteries x 10 missiles,
  escalating waves, smart bombs, score multiplier, session high score
- Trackball aims, press/tap fires, keyboard A/S/D selects battery,
  screen tap aims+fires
- Rendering: incremental TFT_eSPI drawing (persistent enemy trails that
  vanish on death, no AA-rocket trails, explosion circles that repair
  terrain, ghost-free crosshair)
- Sound (sound_engine.cpp): non-blocking I2S task on core 0; wave-start
  alarm of four falling tones (like the original), sweeps/noise effects,
  U/V/M keyboard volume control with OSD, master volume scaling

Emulator (emulator/):
- SDL2 host that compiles the unmodified sketch against shim headers
  (Arduino, TFT_eSPI->framebuffer, GT911 touch, I2C keyboard, I2S->SDL
  audio); arrow keys emulate the trackball, --autoplay/--frames/--dump
  flags for headless smoke tests
2026-11-10 22:06:41 +01:00