I2S_CHANNEL_FMT_ALL_LEFT copies a single channel into every slot, so
both microphones read the same signal and the balance stayed at zero.
Use I2S_CHANNEL_FMT_MULTIPLE (the real TDM mode) instead.
The board only fits two of the four ES7210 mic footprints, but the
schematic carries all four. Rather than hardcode MIC1/MIC3, the detector
now measures the TDM slots and locks onto the two that carry signal,
treating the lower slot as the left microphone. Equal maximum gain is
applied to all inputs so the pair amplifies consistently.
Also widen the balance range (claps produce only a few dB of difference
between the closely spaced mics) and recalibrate loudness to the dBFS
range seen with 37.5 dB analog gain.
Add a SoundDetector that reads the ES7210 as a 4-slot TDM stream
(slot 0 = MIC1/left, slot 2 = MIC3/right), tracks a per-channel RMS
envelope with an adaptive noise floor, and publishes a stereo balance
plus a dB-mapped loudness.
The radar sketch now slides a single reused blip left/right from the
balance and moves it nearer as the loudness rises, instead of firing a
hardcoded demo blip. The device's own ping/click mutes the detector for
200 ms so it cannot hear itself.
The trackball stays detached: GPIO0 is unavailable while the ES7210
microphones are running.