1385 lines
41 KiB
Arduino
1385 lines
41 KiB
Arduino
/**
|
|
* @file UnitTest.ino
|
|
* @author Lewis He (lewishe@outlook.com)
|
|
* @license MIT
|
|
* @copyright Copyright (c) 2023 Shenzhen Xin Yuan Electronic Technology Co., Ltd
|
|
* @date 2023-04-11
|
|
* @note Arduino Setting
|
|
* Tools ->
|
|
* Board:"ESP32S3 Dev Module"
|
|
* USB CDC On Boot:"Enable"
|
|
* USB DFU On Boot:"Disable"
|
|
* Flash Size : "16MB(128Mb)"
|
|
* Flash Mode"QIO 80MHz
|
|
* Partition Scheme:"16M Flash(3M APP/9.9MB FATFS)"
|
|
* PSRAM:"OPI PSRAM"
|
|
* Upload Mode:"UART0/Hardware CDC"
|
|
* USB Mode:"Hardware CDC and JTAG"
|
|
*/
|
|
#include <Arduino.h>
|
|
#include <SPI.h>
|
|
#include <RadioLib.h>
|
|
#include <TFT_eSPI.h>
|
|
#include <lvgl.h>
|
|
#include <SD.h>
|
|
#include "es7210.h"
|
|
#include <Audio.h>
|
|
#include <driver/i2s.h>
|
|
#include <WiFi.h>
|
|
#include "TouchDrvGT911.hpp"
|
|
#include <esp_sntp.h>
|
|
|
|
// By default, the audio pass-through speaker is used for testing, and esp_sr can also be used for noise detection.
|
|
#define USE_ESP_VAD
|
|
|
|
#include "utilities.h"
|
|
#include "config.h"
|
|
|
|
#ifndef BOARD_HAS_PSRAM
|
|
#error "Detected that PSRAM is not turned on. Please set PSRAM to OPI PSRAM in ArduinoIDE"
|
|
#endif
|
|
|
|
#ifndef SerialGPS
|
|
#define SerialGPS Serial1
|
|
#endif
|
|
|
|
#include <TinyGPS++.h>
|
|
TinyGPSPlus gps;
|
|
String gps_model = "None";
|
|
|
|
#define MIC_I2S_SAMPLE_RATE 16000
|
|
#define MIC_I2S_PORT I2S_NUM_1
|
|
#define SPK_I2S_PORT I2S_NUM_0
|
|
#define VAD_SAMPLE_RATE_HZ 16000
|
|
#define VAD_FRAME_LENGTH_MS 30
|
|
#define VAD_BUFFER_LENGTH (VAD_FRAME_LENGTH_MS * VAD_SAMPLE_RATE_HZ / 1000)
|
|
|
|
#if TFT_DC != BOARD_TFT_DC || TFT_CS != BOARD_TFT_CS || TFT_MOSI != BOARD_SPI_MOSI || TFT_SCLK != BOARD_SPI_SCK
|
|
#error "Not using the already configured T-Deck file, please remove <Arduino/libraries/TFT_eSPI> and replace with <lib/TFT_eSPI>, please do not click the upgrade library button when opening sketches in ArduinoIDE versions 2.0 and above, otherwise the original configuration file will be replaced !!!"
|
|
#error "Not using the already configured T-Deck file, please remove <Arduino/libraries/TFT_eSPI> and replace with <lib/TFT_eSPI>, please do not click the upgrade library button when opening sketches in ArduinoIDE versions 2.0 and above, otherwise the original configuration file will be replaced !!!"
|
|
#error "Not using the already configured T-Deck file, please remove <Arduino/libraries/TFT_eSPI> and replace with <lib/TFT_eSPI>, please do not click the upgrade library button when opening sketches in ArduinoIDE versions 2.0 and above, otherwise the original configuration file will be replaced !!!"
|
|
#endif
|
|
|
|
#define LVGL_BUFFER_SIZE (TFT_WIDTH * TFT_HEIGHT * sizeof(lv_color_t))
|
|
|
|
|
|
typedef struct {
|
|
uint8_t cmd;
|
|
uint8_t data[14];
|
|
uint8_t len;
|
|
} lcd_cmd_t;
|
|
|
|
lcd_cmd_t lcd_st7789v[] = {
|
|
{0x01, {0}, 0 | 0x80},
|
|
{0x11, {0}, 0 | 0x80},
|
|
{0x3A, {0X05}, 1},
|
|
{0x36, {0x55}, 1},
|
|
{0xB2, {0x0C, 0x0C, 0X00, 0X33, 0X33}, 5},
|
|
{0xB7, {0X75}, 1},
|
|
{0xBB, {0X1A}, 1},
|
|
{0xC0, {0X2C}, 1},
|
|
{0xC2, {0X01}, 1},
|
|
{0xC3, {0X13}, 1},
|
|
{0xC4, {0X20}, 1},
|
|
{0xC6, {0X0F}, 1},
|
|
{0xD0, {0XA4, 0XA1}, 2},
|
|
{0xD6, {0XA1}, 1},
|
|
{0xE0, {0XD0, 0X0D, 0X14, 0X0D, 0X0D, 0X09, 0X38, 0X44, 0X4E, 0X3A, 0X17, 0X18, 0X2F, 0X30}, 14},
|
|
{0xE1, {0XD0, 0X09, 0X0F, 0X08, 0X07, 0X14, 0X37, 0X44, 0X4D, 0X38, 0X15, 0X16, 0X2C, 0X3E}, 14},
|
|
{0x21, {0}, 0}, //invertDisplay
|
|
{0x29, {0}, 0},
|
|
{0x2C, {0}, 0},
|
|
};
|
|
|
|
TFT_eSPI tft;
|
|
SemaphoreHandle_t xSemaphore = NULL;
|
|
TouchDrvGT911 touch;
|
|
|
|
lv_indev_t *kb_indev = NULL;
|
|
lv_indev_t *mouse_indev = NULL;
|
|
lv_indev_t *touch_indev = NULL;
|
|
|
|
|
|
LV_IMG_DECLARE(image_emoji);
|
|
|
|
|
|
|
|
#ifdef USE_ESP_VAD
|
|
#include <esp_vad.h>
|
|
int16_t *vad_buff;
|
|
vad_handle_t vad_inst;
|
|
const size_t vad_buffer_size = VAD_BUFFER_LENGTH * sizeof(short);
|
|
#else
|
|
uint16_t loopbackBuffer[3200] = {0};
|
|
#endif
|
|
|
|
SX1262 radio = new Module(RADIO_CS_PIN, RADIO_DIO1_PIN, RADIO_RST_PIN, RADIO_BUSY_PIN);
|
|
Audio audio;
|
|
size_t bytes_read;
|
|
uint8_t status;
|
|
TaskHandle_t playHandle = NULL;
|
|
TaskHandle_t radioHandle = NULL;
|
|
|
|
static lv_obj_t *vad_btn_label;
|
|
static uint32_t vad_detected_counter = 0;
|
|
static TaskHandle_t vadTaskHandler;
|
|
bool kbDetected = false;
|
|
bool touchDetected = false;
|
|
bool transmissionFlag = true;
|
|
bool enableInterrupt = true;
|
|
int transmissionState ;
|
|
bool hasRadio = false;
|
|
bool sender = true;
|
|
bool enterSleep = false;
|
|
uint32_t sendCount = 0;
|
|
uint32_t configTxInterval = 1000;
|
|
uint32_t last_update_millis = 0;
|
|
|
|
|
|
lv_obj_t *main_count;
|
|
|
|
|
|
|
|
|
|
|
|
static void setupLvgl();
|
|
static void keypad_read(lv_indev_drv_t *indev_drv, lv_indev_data_t *data);
|
|
static uint32_t keypad_get_key(void);
|
|
static void touchpad_read( lv_indev_drv_t *indev_driver, lv_indev_data_t *data );
|
|
static void mouse_read(lv_indev_drv_t *indev, lv_indev_data_t *data);
|
|
static void disp_flush( lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p );
|
|
static bool GPS_Recovery();
|
|
|
|
|
|
|
|
extern void updateGPS(double lat, double lng,
|
|
uint16_t year, uint8_t month, uint8_t day,
|
|
uint8_t hour, uint8_t minute, uint8_t second,
|
|
double speed, uint32_t rx_char );
|
|
extern void updateNoiseLabel(uint32_t cnt);
|
|
extern void setLoRaMessage(const char *text);
|
|
extern void setupUI(void);
|
|
|
|
|
|
bool setupGPS()
|
|
{
|
|
SerialGPS.begin(9600, SERIAL_8N1, BOARD_GPS_RX_PIN, BOARD_GPS_TX_PIN);
|
|
|
|
bool result = false;
|
|
uint32_t startTimeout ;
|
|
for (int i = 0; i < 3; ++i) {
|
|
SerialGPS.write("$PCAS03,0,0,0,0,0,0,0,0,0,0,,,0,0*02\r\n");
|
|
delay(5);
|
|
// Get version information
|
|
startTimeout = millis() + 3000;
|
|
Serial.print("Try to init L76K . Wait stop .");
|
|
while (SerialGPS.available()) {
|
|
Serial.print(".");
|
|
SerialGPS.readString();
|
|
if (millis() > startTimeout) {
|
|
Serial.println("Wait L76K stop NMEA timeout!");
|
|
return false;
|
|
}
|
|
};
|
|
Serial.println();
|
|
SerialGPS.flush();
|
|
delay(200);
|
|
|
|
SerialGPS.write("$PCAS06,0*1B\r\n");
|
|
startTimeout = millis() + 500;
|
|
String ver = "";
|
|
while (!SerialGPS.available()) {
|
|
if (millis() > startTimeout) {
|
|
Serial.println("Get L76K timeout!");
|
|
return false;
|
|
}
|
|
}
|
|
SerialGPS.setTimeout(10);
|
|
ver = SerialGPS.readStringUntil('\n');
|
|
if (ver.startsWith("$GPTXT,01,01,02")) {
|
|
Serial.println("L76K GNSS init succeeded, using L76K GNSS Module\n");
|
|
gps_model = "L76K";
|
|
result = true;
|
|
break;
|
|
}
|
|
delay(500);
|
|
}
|
|
// Initialize the L76K Chip, use GPS + GLONASS
|
|
SerialGPS.write("$PCAS04,5*1C\r\n");
|
|
delay(250);
|
|
// only ask for RMC and GGA
|
|
SerialGPS.write("$PCAS03,1,0,0,0,1,0,0,0,0,0,,,0,0*02\r\n");
|
|
delay(250);
|
|
// Switch to Vehicle Mode, since SoftRF enables Aviation < 2g
|
|
SerialGPS.write("$PCAS11,3*1E\r\n");
|
|
return result;
|
|
}
|
|
|
|
static void time_available_cb(struct timeval *t)
|
|
{
|
|
Serial.println("Got time adjustment from NTP!");
|
|
}
|
|
|
|
static void wifi_event_cb(WiFiEvent_t event)
|
|
{
|
|
Serial.printf("[WiFi-event] event: %d\n", event);
|
|
|
|
switch (event) {
|
|
case ARDUINO_EVENT_WIFI_READY:
|
|
Serial.println("WiFi interface ready");
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_SCAN_DONE:
|
|
Serial.println("Completed scan for access points");
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_START:
|
|
Serial.println("WiFi client started");
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_STOP:
|
|
Serial.println("WiFi clients stopped");
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_CONNECTED:
|
|
Serial.println("Connected to access point");
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
|
|
Serial.println("Disconnected from WiFi access point");
|
|
lv_msg_send(_BV(1), NULL);
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_AUTHMODE_CHANGE:
|
|
Serial.println("Authentication mode of access point has changed");
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
|
|
Serial.print("Obtained IP address: ");
|
|
Serial.println(WiFi.localIP());
|
|
lv_msg_send(_BV(1), NULL);
|
|
break;
|
|
case ARDUINO_EVENT_WIFI_STA_LOST_IP:
|
|
Serial.println("Lost IP address and IP address is reset to 0");
|
|
lv_msg_send(_BV(1), NULL);
|
|
break;
|
|
default: break;
|
|
}
|
|
}
|
|
|
|
|
|
void setupWiFi()
|
|
{
|
|
WiFi.onEvent(wifi_event_cb);
|
|
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
|
|
|
|
configTzTime(DEFAULT_TIMEZONE, NTP_SERVER1, NTP_SERVER2);
|
|
// set notification call-back function
|
|
sntp_set_time_sync_notification_cb(time_available_cb);
|
|
|
|
}
|
|
|
|
// LilyGo T-Deck control backlight chip has 16 levels of adjustment range
|
|
// The adjustable range is 0~16, 0 is the minimum brightness, 16 is the maximum brightness
|
|
void setBrightness(uint8_t value)
|
|
{
|
|
static uint8_t level = 0;
|
|
static uint8_t steps = 16;
|
|
if (value == 0) {
|
|
digitalWrite(BOARD_BL_PIN, 0);
|
|
delay(3);
|
|
level = 0;
|
|
return;
|
|
}
|
|
if (level == 0) {
|
|
digitalWrite(BOARD_BL_PIN, 1);
|
|
level = steps;
|
|
delayMicroseconds(30);
|
|
}
|
|
int from = steps - level;
|
|
int to = steps - value;
|
|
int num = (steps + to - from) % steps;
|
|
for (int i = 0; i < num; i++) {
|
|
digitalWrite(BOARD_BL_PIN, 0);
|
|
digitalWrite(BOARD_BL_PIN, 1);
|
|
}
|
|
level = value;
|
|
}
|
|
|
|
void setFlag(void)
|
|
{
|
|
// check if the interrupt is enabled
|
|
if (!enableInterrupt) {
|
|
return;
|
|
}
|
|
// we got a packet, set the flag
|
|
transmissionFlag = true;
|
|
}
|
|
|
|
bool setupRadio()
|
|
{
|
|
digitalWrite(BOARD_SDCARD_CS, HIGH);
|
|
digitalWrite(RADIO_CS_PIN, HIGH);
|
|
digitalWrite(BOARD_TFT_CS, HIGH);
|
|
SPI.end();
|
|
SPI.begin(BOARD_SPI_SCK, BOARD_SPI_MISO, BOARD_SPI_MOSI); //SD
|
|
|
|
int state = radio.begin();
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
Serial.println("Start Radio success!");
|
|
} else {
|
|
Serial.print("Start Radio failed,code:");
|
|
Serial.println(state);
|
|
// T-Deck without LoRa, reinitialize SPI
|
|
SPI.begin(BOARD_SPI_SCK, BOARD_SPI_MISO, BOARD_SPI_MOSI);
|
|
return false;
|
|
}
|
|
|
|
Serial.printf("Freq:%.2f TxPower:%d Bandwidth:%.2f\n", RADIO_FREQ, RADIO_TX_POWER, RADIO_BANDWIDTH);
|
|
|
|
hasRadio = true;
|
|
|
|
// set carrier frequency to 868.0 MHz
|
|
if (radio.setFrequency(RADIO_FREQ) == RADIOLIB_ERR_INVALID_FREQUENCY) {
|
|
Serial.println(F("Selected frequency is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// set bandwidth to 125 kHz
|
|
if (radio.setBandwidth(RADIO_BANDWIDTH) == RADIOLIB_ERR_INVALID_BANDWIDTH) {
|
|
Serial.println(F("Selected bandwidth is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// set spreading factor to 10
|
|
if (radio.setSpreadingFactor(RADIO_SF) == RADIOLIB_ERR_INVALID_SPREADING_FACTOR) {
|
|
Serial.println(F("Selected spreading factor is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// set coding rate to 6
|
|
if (radio.setCodingRate(RADIO_CR) == RADIOLIB_ERR_INVALID_CODING_RATE) {
|
|
Serial.println(F("Selected coding rate is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// set LoRa sync word to 0xAB
|
|
if (radio.setSyncWord(0xAB) != RADIOLIB_ERR_NONE) {
|
|
Serial.println(F("Unable to set sync word!"));
|
|
return false;
|
|
}
|
|
|
|
// set output power to 10 dBm (accepted range is -17 - 22 dBm)
|
|
if (radio.setOutputPower(RADIO_TX_POWER) == RADIOLIB_ERR_INVALID_OUTPUT_POWER) {
|
|
Serial.println(F("Selected output power is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// set over current protection limit to 140 mA (accepted range is 45 - 140 mA)
|
|
// NOTE: set value to 0 to disable overcurrent protection
|
|
if (radio.setCurrentLimit(140) == RADIOLIB_ERR_INVALID_CURRENT_LIMIT) {
|
|
Serial.println(F("Selected current limit is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// set LoRa preamble length to 15 symbols (accepted range is 0 - 65535)
|
|
if (radio.setPreambleLength(15) == RADIOLIB_ERR_INVALID_PREAMBLE_LENGTH) {
|
|
Serial.println(F("Selected preamble length is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// disable CRC
|
|
if (radio.setCRC(false) == RADIOLIB_ERR_INVALID_CRC_CONFIGURATION) {
|
|
Serial.println(F("Selected CRC is invalid for this module!"));
|
|
return false;
|
|
}
|
|
|
|
// set the function that will be called
|
|
// when new packet is received
|
|
radio.setDio1Action(setFlag);
|
|
return true;
|
|
|
|
}
|
|
|
|
bool setupSD()
|
|
{
|
|
digitalWrite(BOARD_SDCARD_CS, HIGH);
|
|
digitalWrite(RADIO_CS_PIN, HIGH);
|
|
digitalWrite(BOARD_TFT_CS, HIGH);
|
|
|
|
if (SD.begin(BOARD_SDCARD_CS, SPI, 800000U)) {
|
|
uint8_t cardType = SD.cardType();
|
|
if (cardType == CARD_NONE) {
|
|
Serial.println("No SD_MMC card attached");
|
|
return false;
|
|
} else {
|
|
Serial.print("SD_MMC Card Type: ");
|
|
if (cardType == CARD_MMC) {
|
|
Serial.println("MMC");
|
|
} else if (cardType == CARD_SD) {
|
|
Serial.println("SDSC");
|
|
} else if (cardType == CARD_SDHC) {
|
|
Serial.println("SDHC");
|
|
} else {
|
|
Serial.println("UNKNOWN");
|
|
}
|
|
uint32_t cardSize = SD.cardSize() / (1024 * 1024);
|
|
uint32_t cardTotal = SD.totalBytes() / (1024 * 1024);
|
|
uint32_t cardUsed = SD.usedBytes() / (1024 * 1024);
|
|
Serial.printf("SD Card Size: %lu MB\n", cardSize);
|
|
Serial.printf("Total space: %lu MB\n", cardTotal);
|
|
Serial.printf("Used space: %lu MB\n", cardUsed);
|
|
return true;
|
|
}
|
|
}
|
|
return false;
|
|
}
|
|
|
|
bool setupCoder()
|
|
{
|
|
uint32_t ret_val = ESP_OK;
|
|
|
|
Wire.beginTransmission(ES7210_ADDR);
|
|
uint8_t error = Wire.endTransmission();
|
|
if (error != 0) {
|
|
Serial.println("ES7210 address not found"); return false;
|
|
}
|
|
|
|
audio_hal_codec_config_t cfg = {
|
|
.adc_input = AUDIO_HAL_ADC_INPUT_ALL,
|
|
.codec_mode = AUDIO_HAL_CODEC_MODE_ENCODE,
|
|
.i2s_iface =
|
|
{
|
|
.mode = AUDIO_HAL_MODE_SLAVE,
|
|
.fmt = AUDIO_HAL_I2S_NORMAL,
|
|
.samples = AUDIO_HAL_16K_SAMPLES,
|
|
.bits = AUDIO_HAL_BIT_LENGTH_16BITS,
|
|
},
|
|
};
|
|
|
|
ret_val |= es7210_adc_init(&Wire, &cfg);
|
|
ret_val |= es7210_adc_config_i2s(cfg.codec_mode, &cfg.i2s_iface);
|
|
ret_val |= es7210_adc_set_gain(
|
|
(es7210_input_mics_t)(ES7210_INPUT_MIC1 | ES7210_INPUT_MIC2),
|
|
(es7210_gain_value_t)GAIN_6DB);
|
|
ret_val |= es7210_adc_ctrl_state(cfg.codec_mode, AUDIO_HAL_CTRL_START);
|
|
return ret_val == ESP_OK;
|
|
|
|
}
|
|
|
|
void taskPlaySong(void *p)
|
|
{
|
|
while (1) {
|
|
if ( xSemaphoreTake( xSemaphore, portMAX_DELAY ) == pdTRUE ) {
|
|
playTTS("hello.mp3");
|
|
xSemaphoreGive( xSemaphore );
|
|
}
|
|
vTaskSuspend(NULL);
|
|
}
|
|
}
|
|
|
|
void loopGPS()
|
|
{
|
|
static uint32_t gps_update_interval = 0;
|
|
|
|
unsigned long start = millis();
|
|
do {
|
|
while (SerialGPS.available()) {
|
|
int c = SerialGPS.read();
|
|
// Serial.write(c);
|
|
gps.encode(c);
|
|
}
|
|
} while (millis() - start < 20);
|
|
|
|
if (gps_update_interval < millis()) {
|
|
updateGPS(gps.location.lat(),
|
|
gps.location.lng(),
|
|
gps.date.year(),
|
|
gps.date.month(),
|
|
gps.date.day(),
|
|
gps.time.hour(),
|
|
gps.time.minute(),
|
|
gps.time.second(),
|
|
gps.speed.value(),
|
|
gps.charsProcessed());
|
|
gps_update_interval = millis() + 3000;
|
|
}
|
|
}
|
|
|
|
void loopRadio()
|
|
{
|
|
char buf[256];
|
|
static uint32_t senderInterval = 0;
|
|
if (!hasRadio) {
|
|
return ;
|
|
}
|
|
if ( xSemaphoreTake( xSemaphore, portMAX_DELAY ) == pdTRUE ) {
|
|
digitalWrite(BOARD_SDCARD_CS, HIGH);
|
|
digitalWrite(RADIO_CS_PIN, HIGH);
|
|
digitalWrite(BOARD_TFT_CS, HIGH);
|
|
|
|
if (sender) {
|
|
if ((millis() - senderInterval) > configTxInterval) {
|
|
// check if the previous transmission finished
|
|
if (transmissionFlag) {
|
|
// disable the interrupt service routine while
|
|
// processing the data
|
|
enableInterrupt = false;
|
|
// reset flag
|
|
transmissionFlag = false;
|
|
|
|
if (transmissionState == RADIOLIB_ERR_NONE) {
|
|
// packet was successfully sent
|
|
// Serial.println(F("transmission finished!"));
|
|
// NOTE: when using interrupt-driven transmit method,
|
|
// it is not possible to automatically measure
|
|
// transmission data rate using getDataRate()
|
|
} else {
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(transmissionState);
|
|
}
|
|
|
|
snprintf(buf, 256, "TX %u %s\n", sendCount,
|
|
transmissionState == RADIOLIB_ERR_NONE ? "finished" : "failed");
|
|
|
|
setLoRaMessage(buf);
|
|
|
|
// Serial.println(buf);
|
|
|
|
// you can also transmit byte array up to 256 bytes long
|
|
transmissionState = radio.startTransmit(String(sendCount++).c_str());
|
|
|
|
// we're ready to send more packets,
|
|
// enable interrupt service routine
|
|
enableInterrupt = true;
|
|
}
|
|
// snprintf(dispSenderBuff, sizeof(dispSenderBuff), "TX: %u", sendCount);
|
|
|
|
senderInterval = millis();
|
|
}
|
|
} else {
|
|
|
|
String recv;
|
|
|
|
// check if the flag is set
|
|
if (transmissionFlag) {
|
|
// disable the interrupt service routine while
|
|
// processing the data
|
|
enableInterrupt = false;
|
|
|
|
// reset flag
|
|
transmissionFlag = false;
|
|
|
|
// you can read received data as an Arduino String
|
|
// int state = radio.readData(recv);
|
|
|
|
// you can also read received data as byte array
|
|
/*
|
|
*/
|
|
int state = radio.readData(recv);
|
|
if (state == RADIOLIB_ERR_NONE) {
|
|
|
|
|
|
// packet was successfully received
|
|
Serial.print(F("[RADIO] Received packet!"));
|
|
|
|
// print data of the packet
|
|
Serial.print(F(" Data:"));
|
|
Serial.print(recv);
|
|
|
|
// print RSSI (Received Signal Strength Indicator)
|
|
Serial.print(F(" RSSI:"));
|
|
Serial.print(radio.getRSSI());
|
|
Serial.print(F(" dBm"));
|
|
// snprintf(dispRecvicerBuff[1], sizeof(dispRecvicerBuff[1]), "RSSI:%.2f dBm", radio.getRSSI());
|
|
|
|
// print SNR (Signal-to-Noise Ratio)
|
|
Serial.print(F(" SNR:"));
|
|
Serial.print(radio.getSNR());
|
|
Serial.println(F(" dB"));
|
|
|
|
|
|
snprintf(buf, 256, "RX:%s RSSI:%.2f SNR:%.2f\n", recv.c_str(), radio.getRSSI(), radio.getSNR());
|
|
|
|
setLoRaMessage(buf);
|
|
|
|
} else if (state == RADIOLIB_ERR_CRC_MISMATCH) {
|
|
// packet was received, but is malformed
|
|
Serial.println(F("CRC error!"));
|
|
|
|
} else {
|
|
// some other error occurred
|
|
Serial.print(F("failed, code "));
|
|
Serial.println(state);
|
|
}
|
|
// put module back to listen mode
|
|
radio.startReceive();
|
|
|
|
// we're ready to receive more packets,
|
|
// enable interrupt service routine
|
|
enableInterrupt = true;
|
|
}
|
|
}
|
|
xSemaphoreGive( xSemaphore );
|
|
}
|
|
}
|
|
|
|
void serialToScreen(lv_obj_t *parent, String string, bool result)
|
|
{
|
|
lv_obj_t *cont = lv_obj_create(parent);
|
|
lv_obj_set_scroll_dir(cont, LV_DIR_NONE);
|
|
lv_obj_set_size(cont, LV_PCT(100), lv_font_get_line_height(&lv_font_montserrat_28) + 2 );
|
|
|
|
lv_obj_t *label1 = lv_label_create(cont);
|
|
lv_label_set_recolor(label1, true);
|
|
lv_label_set_text(label1, string.c_str());
|
|
lv_obj_align(label1, LV_ALIGN_LEFT_MID, 0, 0);
|
|
|
|
lv_obj_t *label = lv_label_create(cont);
|
|
lv_label_set_recolor(label, true);
|
|
lv_label_set_text(label, result ? "#FFFFFF [# #00ff00 PASS# #FFFFFF ]#" : "#FFFFFF [# #ff0000 FAIL# #FFFFFF ]#");
|
|
lv_obj_align(label, LV_ALIGN_RIGHT_MID, 0, 0);
|
|
|
|
lv_obj_scroll_to_y(parent, lv_disp_get_ver_res(NULL), LV_ANIM_ON);
|
|
|
|
int i = 200;
|
|
while (i--) {
|
|
lv_task_handler();
|
|
delay(1);
|
|
}
|
|
}
|
|
|
|
bool checkKb()
|
|
{
|
|
int retry = 3;
|
|
do {
|
|
Wire.requestFrom(0x55, 1);
|
|
if (Wire.read() != -1) {
|
|
return true;
|
|
}
|
|
} while (retry--);
|
|
return false;
|
|
}
|
|
|
|
#ifdef USE_ESP_VAD
|
|
void vadTask(void *params)
|
|
{
|
|
Serial.println("vadTask(void *params)");
|
|
|
|
// vTaskSuspend(NULL);
|
|
while (1) {
|
|
size_t read_len = 0;
|
|
if (i2s_read(MIC_I2S_PORT, (char *) vad_buff, vad_buffer_size, &read_len, portMAX_DELAY) == ESP_OK) {
|
|
// if (watch.readMicrophone((char *) vad_buff, vad_buffer_size, &read_len)) {
|
|
// Feed samples to the VAD process and get the result
|
|
#if ESP_IDF_VERSION_VAL(4,4,1) == ESP_IDF_VERSION
|
|
vad_state_t vad_state = vad_process(vad_inst, vad_buff);
|
|
#elif ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4,4,1) && ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5,0,0)
|
|
vad_state_t vad_state = vad_process(vad_inst, vad_buff, MIC_I2S_SAMPLE_RATE, VAD_FRAME_LENGTH_MS);
|
|
#else
|
|
#error "ESP VAD Not support Version > V5.0.0 , please use IDF V4.4.4"
|
|
#endif
|
|
if (vad_state == VAD_SPEECH) {
|
|
// Serial.print(millis());
|
|
// Serial.println(" -> Noise detected!!!");
|
|
updateNoiseLabel(vad_detected_counter++);
|
|
last_update_millis = millis();
|
|
}
|
|
|
|
if (millis() - last_update_millis > 5000) {
|
|
last_update_millis = millis();
|
|
vad_detected_counter = 0;
|
|
}
|
|
}
|
|
delay(30);
|
|
}
|
|
}
|
|
|
|
#else
|
|
|
|
void audioLoopbackTask(void *params)
|
|
{
|
|
vTaskSuspend(NULL);
|
|
while (1) {
|
|
delay(5);
|
|
size_t bytes_read = 0, bytes_write = 0;
|
|
memset(loopbackBuffer, 0, sizeof(loopbackBuffer));
|
|
i2s_read(MIC_I2S_PORT, loopbackBuffer, sizeof(loopbackBuffer), &bytes_read, 15);
|
|
if (bytes_read) {
|
|
i2s_write(SPK_I2S_PORT, loopbackBuffer, bytes_read, &bytes_write, 15);
|
|
}
|
|
}
|
|
vTaskDelete(NULL);
|
|
}
|
|
|
|
#endif
|
|
|
|
void setupMicrophoneI2S(i2s_port_t i2s_ch)
|
|
{
|
|
i2s_config_t i2s_config = {
|
|
.mode = (i2s_mode_t)(I2S_MODE_MASTER | I2S_MODE_RX),
|
|
.sample_rate = MIC_I2S_SAMPLE_RATE,
|
|
.bits_per_sample = I2S_BITS_PER_SAMPLE_16BIT,
|
|
.channel_format = I2S_CHANNEL_FMT_ALL_LEFT,
|
|
.communication_format = I2S_COMM_FORMAT_STAND_I2S,
|
|
.intr_alloc_flags = ESP_INTR_FLAG_LEVEL1,
|
|
.dma_buf_count = 8,
|
|
.dma_buf_len = 64,
|
|
.use_apll = false,
|
|
.tx_desc_auto_clear = true,
|
|
.fixed_mclk = 0,
|
|
.mclk_multiple = I2S_MCLK_MULTIPLE_256,
|
|
.bits_per_chan = I2S_BITS_PER_CHAN_16BIT,
|
|
.chan_mask = (i2s_channel_t)(I2S_TDM_ACTIVE_CH0 | I2S_TDM_ACTIVE_CH1 |
|
|
I2S_TDM_ACTIVE_CH2 | I2S_TDM_ACTIVE_CH3),
|
|
.total_chan = 4,
|
|
};
|
|
i2s_pin_config_t pin_config = {0};
|
|
pin_config.data_in_num = BOARD_ES7210_DIN;
|
|
pin_config.mck_io_num = BOARD_ES7210_MCLK;
|
|
pin_config.bck_io_num = BOARD_ES7210_SCK;
|
|
pin_config.ws_io_num = BOARD_ES7210_LRCK;
|
|
pin_config.data_out_num = -1;
|
|
i2s_driver_install(i2s_ch, &i2s_config, 0, NULL);
|
|
i2s_set_pin(i2s_ch, &pin_config);
|
|
i2s_zero_dma_buffer(i2s_ch);
|
|
|
|
#ifdef USE_ESP_VAD
|
|
// Initialize esp-sr vad detected
|
|
#if ESP_IDF_VERSION_VAL(4,4,1) == ESP_IDF_VERSION
|
|
vad_inst = vad_create(VAD_MODE_0, MIC_I2S_SAMPLE_RATE, VAD_FRAME_LENGTH_MS);
|
|
#elif ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(4,4,1)
|
|
vad_inst = vad_create(VAD_MODE_0);
|
|
#else
|
|
#error "No support this version."
|
|
#endif
|
|
vad_buff = (int16_t *)ps_malloc(vad_buffer_size);
|
|
if (vad_buff == NULL) {
|
|
while (1) {
|
|
Serial.println("Memory allocation failed!");
|
|
delay(1000);
|
|
}
|
|
}
|
|
xTaskCreate(vadTask, "vad", 8 * 1024, NULL, 12, &vadTaskHandler);
|
|
#else
|
|
// xTaskCreate(audioLoopbackTask, "vad", 8 * 1024, NULL, 12, &vadTaskHandler);
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
void playTTS(const char *filename)
|
|
{
|
|
bool findMp3 = false;
|
|
if (SD.exists("/" + String(filename))) {
|
|
findMp3 = audio.connecttoFS(SD, filename);
|
|
} else if (SPIFFS.exists("/" + String(filename))) {
|
|
findMp3 = audio.connecttoFS(SPIFFS, filename);
|
|
}
|
|
if (findMp3) {
|
|
while (audio.isRunning()) {
|
|
audio.loop();
|
|
delay(3);
|
|
}
|
|
}
|
|
}
|
|
|
|
void setupAmpI2S(i2s_port_t i2s_ch)
|
|
{
|
|
audio.setPinout(BOARD_I2S_BCK, BOARD_I2S_WS, BOARD_I2S_DOUT);
|
|
audio.setVolume(21);
|
|
}
|
|
|
|
void setTx()
|
|
{
|
|
if (!hasRadio) {
|
|
return ;
|
|
}
|
|
sender = radio.startTransmit("Hello World!") == RADIOLIB_ERR_NONE;
|
|
}
|
|
|
|
void setRx()
|
|
{
|
|
if (!hasRadio) {
|
|
return ;
|
|
}
|
|
sender = ! (radio.startReceive() == RADIOLIB_ERR_NONE);
|
|
}
|
|
|
|
void setFreq(float f)
|
|
{
|
|
if (!hasRadio) {
|
|
return ;
|
|
}
|
|
if (radio.setFrequency(f) != RADIOLIB_ERR_NONE) {
|
|
Serial.println("setFrequency failed!");
|
|
}
|
|
}
|
|
|
|
void setBandWidth(float bw)
|
|
{
|
|
if (!hasRadio) {
|
|
return ;
|
|
}
|
|
if (radio.setBandwidth(bw) != RADIOLIB_ERR_NONE) {
|
|
Serial.println("setBandwidth failed!");
|
|
}
|
|
}
|
|
|
|
void setTxPower(int16_t dBm)
|
|
{
|
|
if (!hasRadio) {
|
|
return ;
|
|
}
|
|
if (radio.setOutputPower(dBm) != RADIOLIB_ERR_NONE) {
|
|
Serial.println("setOutputPower failed!");
|
|
}
|
|
}
|
|
|
|
void setSenderInterval(uint32_t interval_ms)
|
|
{
|
|
configTxInterval = interval_ms;
|
|
}
|
|
|
|
void soundPlay()
|
|
{
|
|
if (playHandle) {
|
|
vTaskResume(playHandle);
|
|
}
|
|
}
|
|
|
|
void setup()
|
|
{
|
|
Serial.begin(115200);
|
|
|
|
Serial.println("T-DECK factory");
|
|
|
|
//! The board peripheral power control pin needs to be set to HIGH when using the peripheral
|
|
pinMode(BOARD_POWERON, OUTPUT);
|
|
digitalWrite(BOARD_POWERON, HIGH);
|
|
|
|
//! Set CS on all SPI buses to high level during initialization
|
|
pinMode(BOARD_SDCARD_CS, OUTPUT);
|
|
pinMode(RADIO_CS_PIN, OUTPUT);
|
|
pinMode(BOARD_TFT_CS, OUTPUT);
|
|
|
|
digitalWrite(BOARD_SDCARD_CS, HIGH);
|
|
digitalWrite(RADIO_CS_PIN, HIGH);
|
|
digitalWrite(BOARD_TFT_CS, HIGH);
|
|
|
|
pinMode(BOARD_SPI_MISO, INPUT_PULLUP);
|
|
SPI.begin(BOARD_SPI_SCK, BOARD_SPI_MISO, BOARD_SPI_MOSI); //SD
|
|
|
|
pinMode(BOARD_BOOT_PIN, INPUT_PULLUP);
|
|
pinMode(BOARD_TBOX_G02, INPUT_PULLUP);
|
|
pinMode(BOARD_TBOX_G01, INPUT_PULLUP);
|
|
pinMode(BOARD_TBOX_G04, INPUT_PULLUP);
|
|
pinMode(BOARD_TBOX_G03, INPUT_PULLUP);
|
|
|
|
//Add mutex to allow multitasking access
|
|
xSemaphore = xSemaphoreCreateBinary();
|
|
assert(xSemaphore);
|
|
xSemaphoreGive( xSemaphore );
|
|
|
|
|
|
Serial.print("Init display id:");
|
|
Serial.println(USER_SETUP_ID);
|
|
|
|
tft.begin();
|
|
|
|
/**
|
|
* * T-Deck-Plus and T-Deck display panels are different.
|
|
* * This initialization is used to override the initialization parameters.
|
|
* * It is used when the display is abnormal after the TFT_eSPI update. */
|
|
#if 0
|
|
for (uint8_t i = 0; i < (sizeof(lcd_st7789v) / sizeof(lcd_cmd_t)); i++) {
|
|
tft.writecommand(lcd_st7789v[i].cmd);
|
|
for (int j = 0; j < (lcd_st7789v[i].len & 0x7f); j++) {
|
|
tft.writedata(lcd_st7789v[i].data[j]);
|
|
}
|
|
|
|
if (lcd_st7789v[i].len & 0x80) {
|
|
delay(120);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
tft.setRotation( 1 );
|
|
tft.fillScreen(TFT_BLACK);
|
|
|
|
Wire.begin(BOARD_I2C_SDA, BOARD_I2C_SCL);
|
|
|
|
touch.setPins(-1, BOARD_TOUCH_INT);
|
|
touchDetected = touch.begin(Wire);
|
|
if (touchDetected) {
|
|
Serial.println("Init GT911 Sensor success!");
|
|
|
|
// Set touch max xy
|
|
touch.setMaxCoordinates(320, 240);
|
|
|
|
// Set swap xy
|
|
touch.setSwapXY(true);
|
|
|
|
// Set mirror xy
|
|
touch.setMirrorXY(false, true);
|
|
|
|
} else {
|
|
Serial.println("Failed to find GT911 - check your wiring!");
|
|
}
|
|
|
|
kbDetected = checkKb();
|
|
|
|
|
|
pinMode(BOARD_BL_PIN, OUTPUT);
|
|
setBrightness(16);
|
|
|
|
|
|
setupLvgl();
|
|
|
|
// Show logo
|
|
|
|
LV_FONT_DECLARE(logo_font);
|
|
lv_obj_set_style_bg_color(lv_scr_act(), lv_color_black(), LV_PART_MAIN);
|
|
lv_obj_t *logo = lv_label_create(lv_scr_act());
|
|
lv_obj_set_style_text_font(logo, &logo_font, LV_PART_MAIN);
|
|
lv_obj_set_style_text_color(logo, lv_color_white(), LV_PART_MAIN);
|
|
lv_label_set_text(logo, "LilyGo\nT-Deck");
|
|
lv_obj_center(logo);
|
|
|
|
for (int i = 0; i <= 16; ++i) {
|
|
setBrightness(i);
|
|
lv_timer_handler();
|
|
delay(30);
|
|
}
|
|
|
|
|
|
SPIFFS.begin();
|
|
|
|
setupSD();
|
|
|
|
setupRadio();
|
|
|
|
setupCoder();
|
|
|
|
setupAmpI2S(SPK_I2S_PORT);
|
|
|
|
setupMicrophoneI2S(MIC_I2S_PORT);
|
|
|
|
// Test screen
|
|
#ifdef ENABLE_TEST_IMG
|
|
lv_obj_t *label;
|
|
|
|
const lv_img_dsc_t *img_src[4] = {&image1, &image2, &image3, &image4};
|
|
lv_obj_t *img = lv_img_create(lv_scr_act());
|
|
lv_img_set_src(img, (void *)(img_src[3]));
|
|
|
|
// Adjust backlight
|
|
pinMode(BOARD_BL_PIN, OUTPUT);
|
|
//T-Deck control backlight chip has 16 levels of adjustment range
|
|
for (int i = 0; i < 16; ++i) {
|
|
setBrightness(i);
|
|
lv_task_handler();
|
|
delay(30);
|
|
}
|
|
delay(4000);
|
|
|
|
int i = 2;
|
|
while (i >= 0) {
|
|
lv_img_set_src(img, (void *)(img_src[i]));
|
|
lv_task_handler();
|
|
i--;
|
|
delay(2000);
|
|
}
|
|
|
|
lv_obj_del(img);
|
|
#endif
|
|
|
|
|
|
|
|
#if 0
|
|
main_count = lv_obj_create(lv_scr_act());
|
|
lv_obj_set_style_bg_img_src(main_count, &image_output, LV_PART_MAIN);
|
|
lv_obj_set_style_border_opa(main_count, LV_OPA_100, 0);
|
|
lv_obj_set_style_radius(main_count, 0, 0);
|
|
lv_obj_set_size(main_count, LV_PCT(100), LV_PCT(100));
|
|
lv_obj_set_flex_flow(main_count, LV_FLEX_FLOW_COLUMN);
|
|
lv_obj_center(main_count);
|
|
|
|
// Show device state
|
|
serialToScreen(main_count, "Keyboard C3", kbDetected);
|
|
serialToScreen(main_count, "Capacitive Touch", touchDetected);
|
|
serialToScreen(main_count, "Radio SX1262", hasRadio);
|
|
if (SD.cardType() != CARD_NONE) {
|
|
serialToScreen(main_count, "Mass storage #FFFFFF [# #00ff00 "
|
|
+ String(SD.cardSize() / 1024 / 1024.0 )
|
|
+ "MB# #FFFFFF ]#", true);
|
|
} else {
|
|
serialToScreen(main_count, "Mass storage", false);
|
|
}
|
|
|
|
uint32_t endTime = millis() + 5000;
|
|
while (millis() < endTime) {
|
|
lv_task_handler();
|
|
delay(1);
|
|
}
|
|
|
|
lv_obj_clean(main_count);
|
|
lv_obj_set_scroll_dir(main_count, LV_DIR_NONE);
|
|
lv_obj_set_scrollbar_mode(main_count, LV_SCROLLBAR_MODE_OFF);
|
|
#endif
|
|
|
|
setupWiFi();
|
|
|
|
if (!setupGPS()) {
|
|
SerialGPS.begin(38400, SERIAL_8N1, BOARD_GPS_RX_PIN, BOARD_GPS_TX_PIN);
|
|
uint32_t baudrate[] = {38400, 115200, 9600};
|
|
// Restore factory settings
|
|
for (int i = 0; i < 3; ++i) {
|
|
Serial.printf("Use baudrate : %u\n", baudrate[i]);
|
|
if (GPS_Recovery()) {
|
|
Serial.println("UBlox-M10Q GNSS init succeeded, using UBlox-M10Q GNSS Module\n");
|
|
gps_model = "UBlox-M10";
|
|
break;
|
|
}
|
|
Serial.printf("Update baudrate : %u\n", baudrate[i]);
|
|
SerialGPS.updateBaudRate(baudrate[i]);
|
|
}
|
|
}
|
|
|
|
|
|
lv_obj_del(logo);
|
|
|
|
setupUI();
|
|
|
|
xTaskCreate(taskPlaySong, "play", 1024 * 4, NULL, 10, &playHandle);
|
|
}
|
|
|
|
void loop()
|
|
{
|
|
if (enterSleep) {
|
|
|
|
vTaskDelete(playHandle);
|
|
playHandle = NULL;
|
|
|
|
#ifdef USE_ESP_VAD
|
|
vTaskDelete(vadTaskHandler);
|
|
vadTaskHandler = NULL;
|
|
#endif
|
|
|
|
//LilyGo T-Deck control backlight chip has 16 levels of adjustment range
|
|
for (int i = 16; i > 0; --i) {
|
|
setBrightness(i);
|
|
delay(30);
|
|
}
|
|
|
|
delay(1000);
|
|
|
|
//If you need other peripherals to maintain power, please set the IO port to hold
|
|
// gpio_hold_en((gpio_num_t)BOARD_POWERON);
|
|
// gpio_deep_sleep_hold_en();
|
|
|
|
touch.sleep(); //set touchpad enter sleep mode
|
|
tft.writecommand(0x10); //set display enter sleep mode
|
|
SPI.end();
|
|
Wire.end();
|
|
esp_sleep_enable_ext1_wakeup(1ull << BOARD_BOOT_PIN, ESP_EXT1_WAKEUP_ALL_LOW);
|
|
esp_deep_sleep_start();
|
|
//Deep sleep consumes approximately 240uA of current
|
|
}
|
|
|
|
loopRadio();
|
|
loopGPS();
|
|
lv_task_handler();
|
|
}
|
|
|
|
|
|
|
|
// !!! LVGL !!!
|
|
// !!! LVGL !!!
|
|
// !!! LVGL !!!
|
|
static void disp_flush( lv_disp_drv_t *disp, const lv_area_t *area, lv_color_t *color_p )
|
|
{
|
|
uint32_t w = ( area->x2 - area->x1 + 1 );
|
|
uint32_t h = ( area->y2 - area->y1 + 1 );
|
|
if ( xSemaphoreTake( xSemaphore, portMAX_DELAY ) == pdTRUE ) {
|
|
tft.startWrite();
|
|
tft.setAddrWindow( area->x1, area->y1, w, h );
|
|
tft.pushColors( ( uint16_t * )&color_p->full, w * h, false );
|
|
tft.endWrite();
|
|
lv_disp_flush_ready( disp );
|
|
xSemaphoreGive( xSemaphore );
|
|
}
|
|
}
|
|
|
|
static void mouse_read(lv_indev_drv_t *indev, lv_indev_data_t *data)
|
|
{
|
|
static int16_t last_x;
|
|
static int16_t last_y;
|
|
bool left_button_down = false;
|
|
const uint8_t dir_pins[5] = {BOARD_TBOX_G02,
|
|
BOARD_TBOX_G01,
|
|
BOARD_TBOX_G04,
|
|
BOARD_TBOX_G03,
|
|
BOARD_BOOT_PIN
|
|
};
|
|
static bool last_dir[5];
|
|
uint8_t pos = 10;
|
|
for (int i = 0; i < 5; i++) {
|
|
bool dir = digitalRead(dir_pins[i]);
|
|
if (dir != last_dir[i]) {
|
|
last_dir[i] = dir;
|
|
switch (i) {
|
|
case 0:
|
|
if (last_x < (lv_disp_get_hor_res(NULL) - image_emoji.header.w)) {
|
|
last_x += pos;
|
|
}
|
|
break;
|
|
case 1:
|
|
if (last_y > image_emoji.header.h) {
|
|
last_y -= pos;
|
|
}
|
|
break;
|
|
case 2:
|
|
if (last_x > image_emoji.header.w) {
|
|
last_x -= pos;
|
|
}
|
|
break;
|
|
case 3:
|
|
if (last_y < (lv_disp_get_ver_res(NULL) - image_emoji.header.h)) {
|
|
last_y += pos;
|
|
}
|
|
break;
|
|
case 4:
|
|
left_button_down = true;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
// Serial.printf("indev:X:%04d Y:%04d \n", last_x, last_y);
|
|
/*Store the collected data*/
|
|
data->point.x = last_x;
|
|
data->point.y = last_y;
|
|
data->state = left_button_down ? LV_INDEV_STATE_PRESSED : LV_INDEV_STATE_RELEASED;
|
|
}
|
|
|
|
/*Read the touchpad*/
|
|
static void touchpad_read( lv_indev_drv_t *indev_driver, lv_indev_data_t *data )
|
|
{
|
|
static int16_t x[5], y[5];
|
|
data->state = LV_INDEV_STATE_REL;
|
|
if (touch.isPressed()) {
|
|
uint8_t touched = touch.getPoint(x, y, 1);
|
|
if (touched > 0) {
|
|
data->state = LV_INDEV_STATE_PR;
|
|
data->point.x = x[0];
|
|
data->point.y = y[0];
|
|
}
|
|
}
|
|
}
|
|
|
|
// Read key value from esp32c3
|
|
static uint32_t keypad_get_key(void)
|
|
{
|
|
static uint32_t retry = 0;
|
|
char key_ch = 0;
|
|
if (retry > 10) {
|
|
lv_indev_delete(kb_indev);
|
|
kb_indev = NULL;
|
|
return 0;
|
|
}
|
|
Wire.beginTransmission(0x55);
|
|
if (Wire.endTransmission() != 0) {
|
|
Serial.println("Keyboard Failed!");
|
|
retry++;
|
|
return 0;
|
|
}
|
|
Wire.requestFrom(0x55, 1);
|
|
while (Wire.available() > 0) {
|
|
key_ch = Wire.read();
|
|
retry = 0;
|
|
}
|
|
return key_ch;
|
|
}
|
|
|
|
/*Will be called by the library to read the mouse*/
|
|
static void keypad_read(lv_indev_drv_t *indev_drv, lv_indev_data_t *data)
|
|
{
|
|
static uint32_t last_key = 0;
|
|
uint32_t act_key ;
|
|
act_key = keypad_get_key();
|
|
if (act_key != 0) {
|
|
data->state = LV_INDEV_STATE_PR;
|
|
Serial.printf("Key pressed : 0x%x\n", act_key);
|
|
last_key = act_key;
|
|
} else {
|
|
data->state = LV_INDEV_STATE_REL;
|
|
}
|
|
data->key = last_key;
|
|
}
|
|
|
|
static void setupLvgl()
|
|
{
|
|
static lv_disp_draw_buf_t draw_buf;
|
|
static lv_color_t *buf = (lv_color_t *)ps_malloc(LVGL_BUFFER_SIZE);
|
|
if (!buf) {
|
|
Serial.println("memory alloc failed!");
|
|
delay(5000);
|
|
assert(buf);
|
|
}
|
|
String LVGL_Arduino = "Hello Arduino! ";
|
|
LVGL_Arduino += String('V') + lv_version_major() + "." + lv_version_minor() + "." + lv_version_patch();
|
|
Serial.println( LVGL_Arduino );
|
|
Serial.println( "I am LVGL_Arduino" );
|
|
|
|
lv_init();
|
|
|
|
lv_group_set_default(lv_group_create());
|
|
|
|
lv_disp_draw_buf_init( &draw_buf, buf, NULL, LVGL_BUFFER_SIZE );
|
|
|
|
/*Initialize the display*/
|
|
static lv_disp_drv_t disp_drv;
|
|
lv_disp_drv_init( &disp_drv );
|
|
|
|
/*Change the following line to your display resolution*/
|
|
disp_drv.hor_res = TFT_HEIGHT;
|
|
disp_drv.ver_res = TFT_WIDTH;
|
|
disp_drv.flush_cb = disp_flush;
|
|
disp_drv.draw_buf = &draw_buf;
|
|
disp_drv.full_refresh = 1;
|
|
lv_disp_drv_register( &disp_drv );
|
|
|
|
/*Initialize the input device driver*/
|
|
|
|
/*Register a touchscreen input device*/
|
|
if (touchDetected) {
|
|
static lv_indev_drv_t indev_touchpad;
|
|
lv_indev_drv_init( &indev_touchpad );
|
|
indev_touchpad.type = LV_INDEV_TYPE_POINTER;
|
|
indev_touchpad.read_cb = touchpad_read;
|
|
touch_indev = lv_indev_drv_register( &indev_touchpad );
|
|
}
|
|
|
|
/*Register a mouse input device*/
|
|
static lv_indev_drv_t indev_mouse;
|
|
lv_indev_drv_init( &indev_mouse );
|
|
indev_mouse.type = LV_INDEV_TYPE_POINTER;
|
|
indev_mouse.read_cb = mouse_read;
|
|
mouse_indev = lv_indev_drv_register( &indev_mouse );
|
|
lv_indev_set_group(mouse_indev, lv_group_get_default());
|
|
|
|
lv_obj_t *cursor_obj;
|
|
cursor_obj = lv_img_create(lv_scr_act()); /*Create an image object for the cursor */
|
|
lv_img_set_src(cursor_obj, &image_emoji); /*Set the image source*/
|
|
lv_indev_set_cursor(mouse_indev, cursor_obj); /*Connect the image object to the driver*/
|
|
|
|
if (kbDetected) {
|
|
Serial.println("Keyboard registered!!");
|
|
/*Register a keypad input device*/
|
|
static lv_indev_drv_t indev_keypad;
|
|
lv_indev_drv_init(&indev_keypad);
|
|
indev_keypad.type = LV_INDEV_TYPE_KEYPAD;
|
|
indev_keypad.read_cb = keypad_read;
|
|
kb_indev = lv_indev_drv_register(&indev_keypad);
|
|
lv_indev_set_group(kb_indev, lv_group_get_default());
|
|
}
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
uint8_t buffer[256];
|
|
|
|
int getAck(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID)
|
|
{
|
|
uint16_t ubxFrameCounter = 0;
|
|
bool ubxFrame = 0;
|
|
uint32_t startTime = millis();
|
|
uint16_t needRead;
|
|
|
|
while (millis() - startTime < 800) {
|
|
while (SerialGPS.available()) {
|
|
int c = SerialGPS.read();
|
|
switch (ubxFrameCounter) {
|
|
case 0:
|
|
if (c == 0xB5) {
|
|
ubxFrameCounter++;
|
|
}
|
|
break;
|
|
case 1:
|
|
if (c == 0x62) {
|
|
ubxFrameCounter++;
|
|
} else {
|
|
ubxFrameCounter = 0;
|
|
}
|
|
break;
|
|
case 2:
|
|
if (c == requestedClass) {
|
|
ubxFrameCounter++;
|
|
} else {
|
|
ubxFrameCounter = 0;
|
|
}
|
|
break;
|
|
case 3:
|
|
if (c == requestedID) {
|
|
ubxFrameCounter++;
|
|
} else {
|
|
ubxFrameCounter = 0;
|
|
}
|
|
break;
|
|
case 4:
|
|
needRead = c;
|
|
ubxFrameCounter++;
|
|
break;
|
|
case 5:
|
|
needRead |= (c << 8);
|
|
ubxFrameCounter++;
|
|
break;
|
|
case 6:
|
|
if (needRead >= size) {
|
|
ubxFrameCounter = 0;
|
|
break;
|
|
}
|
|
if (SerialGPS.readBytes(buffer, needRead) != needRead) {
|
|
ubxFrameCounter = 0;
|
|
} else {
|
|
return needRead;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static bool GPS_Recovery()
|
|
{
|
|
uint8_t cfg_clear1[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1C, 0xA2};
|
|
uint8_t cfg_clear2[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x1B, 0xA1};
|
|
uint8_t cfg_clear3[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x03, 0x1D, 0xB3};
|
|
SerialGPS.write(cfg_clear1, sizeof(cfg_clear1));
|
|
|
|
if (getAck(buffer, 256, 0x05, 0x01)) {
|
|
Serial.println("Get ack successes!");
|
|
}
|
|
SerialGPS.write(cfg_clear2, sizeof(cfg_clear2));
|
|
if (getAck(buffer, 256, 0x05, 0x01)) {
|
|
Serial.println("Get ack successes!");
|
|
}
|
|
SerialGPS.write(cfg_clear3, sizeof(cfg_clear3));
|
|
if (getAck(buffer, 256, 0x05, 0x01)) {
|
|
Serial.println("Get ack successes!");
|
|
}
|
|
|
|
// UBX-CFG-RATE, Size 8, 'Navigation/measurement rate settings'
|
|
uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x0E, 0x30};
|
|
SerialGPS.write(cfg_rate, sizeof(cfg_rate));
|
|
if (getAck(buffer, 256, 0x06, 0x08)) {
|
|
Serial.println("Get ack successes!");
|
|
} else {
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|